Question about Quasar VV-2002 20 in. TV/VCR Combo

Open Question

Set up Quasar TV remote

How do I program my:

Quasar Tower Univeral TV remote program director for my TV?

Posted by on

5 Suggested Answers

  • 1153 Answers

SOURCE: AIWA VX-T1420 Setting Channels

No it should not light up. If you can not go into menu and add channels manually or auto program. Then you will have to get a remote to work. You could order original remotecontrols.com.

Posted on Sep 23, 2007

  • 579 Answers

SOURCE: Quasar 13" TV/VCR lost remote cannot find menu

You must buy a universal remote and be sure and get one that has a menu button on it.

Posted on Dec 31, 2007

premtech
  • 934 Answers

SOURCE: quasar tv

Try this site:
http://www.remotecodelist.com/remotes/

Bill

Posted on Feb 09, 2008

mewms_14904
  • 1027 Answers

SOURCE: quasar vv2020 remote codes

Quasar tv/vcr 0374 0381 0035 0162

These are the only ones I found for the combo's

Posted on Mar 18, 2008

SOURCE: Older Quasar Video TV combo Model UU1220AW, SN VSOS1226

can you please send me the tv vcr combo code for my philips remote, to the old quasar tv. thank you Genef9@yahoo.com

Posted on May 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE A QUASAR VV2008 TV/VCR COMBO AND I DONT HAVE REMOTE AND CANT GET TO NO CHANNELS EXCEPT 60 AND LINE


The remote model number for the Quasar VV2008 is VSQS1570 and can be ordered from Panasonic at 1-800-221-7262 or Go to a Family Dollar store and purchase the grey RCA universal remote for $6.00 about 6 inches in length. When you are ready to program it for the Quasar VV2008 push the code search button then the VCR button and enter 0162 then push enter. The red light should go off and the remote should turn the TV/VCR off and on. It worked for me 4/19/2013

Apr 12, 2011 | Quasar VV-2002 20 in. TV/VCR Combo

1 Answer

How can i find remote control codes for my quasar tv


Hello
Three digit universal remote codes for Quasar TV are:
003/ 054/ 055/ 062/ 070/ 148/ 149/ 170/ 171

Four digit univeral remote codes for Quasar TV are:
0171 0148 0054 0170 0062 0374 0381 0003 0070

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand. NB: Switch OFF and switch ON your TV, WITH ITS FRONT PANEL POWER CONTROL SWITCH, each time before trying an other code.
OK.

Feb 23, 2011 | Quasar VV-1301 13 in. Combo

1 Answer

Quasar 13" tv/vcr combo


Standard universal remotes rarely work well with combination devices. Try programming the TV part in the TV mode and the VCR functions in the VCR mode. If this doesn't work you may be out of luck unless you get a logitech harmony remote. You might be able to find one on ebay for about $50. Depending on the model the usually run $150 - $1000. These remotes need to be set up with a computer but the program is pretty strait forward. This is the only remote that I can guarentee will work.

Apr 24, 2009 | Quasar VV-1302 13 in. TV/VCR Combo

1 Answer

My Quasar VV8220


According to the manual, follow the steps below to program channels on your Quasar VV8220 TV:

1) Hold the CHANNEL MEMORY Button on your remote in and press the 1 key
(a box will come up where you can shift between TV & CATV --
you will want to be on CATV (for cable channels).

2) Press the 4 key which will change from TV to CATV -- make sure it is
on CATV or if it is already on CATV, press the 5 key.

3) Press the 4 key (the auto set guide will engage and go through the channels).

Hope this is helpful.

Aug 14, 2008 | Televison & Video

3 Answers

Older Quasar Video TV combo Model UU1220AW, SN VSOS1226


can you please send me the tv vcr combo code for my philips remote, to the old quasar tv. thank you Genef9@yahoo.com

Apr 20, 2008 | Quasar VV-2002 20 in. TV/VCR Combo

1 Answer

Quasar vv2020 remote codes


Quasar tv/vcr 0374 0381 0035 0162

These are the only ones I found for the combo's

Mar 18, 2008 | Quasar VV-2002 20 in. TV/VCR Combo

1 Answer

Quasar VH5280...


Check first 0000, 0374 0381 0162 0035
need to know which remote your using?

Mar 07, 2008 | Quasar VV-2002 20 in. TV/VCR Combo

1 Answer

Can receive only channels 1 thru 27 although connected to cable with 70 channels.


First you need to check if your set is in the cable mode and not antena mode,if the set is in cable make sure is in the standard cable mode and not another type of cable like HRC,if it is change it and try the autoprogram to set the available channels.I hope it helps.

Sep 11, 2006 | Panasonic PV-M1349 Combo

Not finding what you are looking for?
Quasar VV-2002 20 in. TV/VCR Combo Logo

Related Topics:

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Quasar Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69610 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

Are you a Quasar Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...