Remove Mp3 player if you already connected to the USB port
Run the program (You should see something like: Please connect the device)
Hold down the Play button and connect the Mp3 Player to USB port(Hold down the play button while you connect the device, you should seea message (normally after 8 seconds) like: Initializing on YP-U2J Updater program screen)
After you hear the Windows chime "new device found" or the message"Initializing" on YP-U2J Updater, you can now remove your hand fromplay button.
Check the Format Data Area checkbox (By clicking the yes button, you will lose all of your data in your Mp3 player)
Click the "yes" button
Finally, click on the Start button (takes less than a minute). DO NOT REMOVE YOUR DEVICE
IMPORTANT: After updating the firmware, you MUSTdisconnect the Mp3 player and turn it on. You will see a 20% messagefor about 50 seconds and it will be restarted automatically.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You have to transfer it back to your pc then rename it, then delete song from mp3 player and copy over new named mp3 or cda.
.cda is a clean track from a cd, you may have to convert it to mp3, if not neccassary, just rename track 23.cda as whatever you want as long as .cda remains, but this hs to be done on your pc first.