Question about iRiver T10 MP3 Player

4 Answers

Iriver T10 When I plug it into the usb the computer does not detect my device, on top of that the installation cd just instaills windows media player, not the iriver software. The iriver screen says usb connect, but the computer acts like nothings is there. No errors, just nothing. I need serous help

Posted by on

4 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers
Re: iriver T10

Somehow the driver went missing. Click on "My Computer" and then click "view system information," then "hardware," then "device manager," then click on iRiver (it'll be there even without the driver) and then it will give you a yes/no option to look for driver software. Obviously, click "yes" but notice that you are also cued to put in a CD "if you have one." I still had the CD. It will search both the CD and online for a driver, but the computer found the driver software on the CD. Make sure you only put the CD in when cued to do so. If you don't have the CD, then contact iRiver about getting a driver download or having them send you a copy of the CD.

Posted on May 13, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers
Re: iriver T10

I spent quite a bit time trying above solutions for "iRiver T10 not being detected". None of the above worked. What finally worked for me was to find a computer that had not been upgraded to Windows Media Player Version 11. With Windows Media Player Version 10, the T10 is correctly detected, iRiver's firmware install tool works, I upgraded the firmware, and now, finally my friend's T10 works on all my computers (including Windows Media Player Version 11 computers).

Posted on Jul 23, 2008

Re: iriver T10

Mi iriver t 10 no me enciende

Posted on Feb 07, 2008

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 67 Answers
Re: iriver T10

On your player go to settings screen, then to advanced, then to format. select format, then yes. Player should reboot. Then try connecting again. iriver uses windows media player now. shouldn't need anything else.

Posted on Jul 29, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Ineed a usb cable for a t10 iriver mp3 player

Computer shops sell USB cables. Take your Iriver player with you to the computer shop because the USB cables come with different size connectors and you need one that fits your player.

Mar 03, 2013 | iRiver MP3 & Digital Media Players

1 Answer

USB not connecting.

Hi there,

Well you need to install the driver/software of your player into computer, install them from the cd comes with your player. If you don't have the cd then please follow the below link to download the driver/software -

(First connect your player to computer and then install the driver/software after downloading. If your computer ask to restart then restart them)

Good Luck!!

Mar 31, 2010 | Samsung YP-T10 Digital Media Player

1 Answer

I bought a used iriver T10 mp3 player and cannot find the right software to install it on my computer. Where can I find this? I have XP


The iRiver T10 player is being sold with either MTP or MSC firmware,
depending on the country it originally comes from.
For MTP firmware, you'll need software Windows Media Player 10 or 11:
this software is installed when running XP SP2 or higher.
When not connecting with WMP you'll probably have the MSC version:
iRiver Plus3 software is needed for connecting this player (see below***).

Have a look in the player's System Info for knowing what firmware version is in the device: see the manual on page 55, page 29 in the pdf file. When not having the manual, go for a download to the Tech Support site:
In the bar [select a product], choose T10 from the list and click GO on the right, to get a view of all support for the T10.

Next select in the bar [select a category] Software&Driver and click GO
on the right. Updater for MTP devices and T series MSC drivers will show up: select the matching software and driver according to the previous check of firmware version.

When needing iRiver Plus3, click Plus3 in the page top of the support page or select next link:

Feb 21, 2010 | iRiver T10 MP3 Player

1 Answer

Computer cant find my iriver 120

if u have data cable with your device plug it into
the usb port of your pc and put the installer cd of
your device into the cd drive and install the driver
and plug your device on the cable.

Dec 28, 2009 | iRiver iHP-120 MP3 Player

1 Answer

My computer does not recognize my iriver mp3 player when i plug it in.

If the MP3 Player came with a Disc you should install anything that hints to the words 'Driver'

Drivers are what the computer uses to talk between different pieces of hardware ei. Computer to MP3.

Also doin a windows update could help.

If neither of these are suffice you should google you irivers model and driver.
For instance my circumstance would be "iriver e10 driver windows xp"

Dec 17, 2009 | iRiver T10 MP3 Player

1 Answer

I river t10

Install windows media player 10 or 11........ No drivers needed, just the USB cable. Enjoy

Dec 28, 2008 | iRiver T10 MP3 Player

3 Answers

My iriver plus3 software does not detect my iriver h10 player


Oct 15, 2008 | iRiver H10 MP3 Player

1 Answer

No longer seen by any computer

For me, having upgraded Windows Media Player to version 11 caused the problem you are experiencing. Find a computer with Windows Media Player Version 10, then use iRiver's firmware update tool to install new firmware (version 1.77), then your T10 will work fine even with Media Player Version 11.

May 12, 2008 | iRiver T10 MP3 Player

1 Answer

Tansferring Songs

Your problem sounds different from the one I had, but you might try the solution that worked for my problem: Go to a computer that has Windows Media Player Version 10 (not version 11), use iRiver's firmware update tool to install firmware version 1.77. Then, for me at least, my T10 worked on Windows Media Player Version 11 computers.

Jan 18, 2008 | iRiver T10 MP3 Player

7 Answers

My iriver T10 is not being detected

That happend to me and i found a solution. First go to my computer and on your left click on VIEW SYSTEM INFORMATION then go to HARDWARE now click in DEVICE MANAGER it should say T10 around there look for T10 or IRIVER T10 and click on it press in UPDATE THIS TIME ONLY or an option you like and click next then click on the RECOMENDED OPTION to install the iriver t10 after you do that a magnifying glass should appear and wait and it would install saying MTP.
If still need help send me a message at NOHEMYGIRALDO@SBCGLOBAL.NET

Nov 26, 2006 | iRiver T10 MP3 Player

Not finding what you are looking for?
iRiver T10 MP3 Player Logo

1,148 people viewed this question

Ask a Question

Usually answered in minutes!

Top iRiver MP3 & Digital Media Players Experts


Level 3 Expert

93738 Answers

Steven Wander
Steven Wander

Level 3 Expert

574 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an iRiver MP3 and Digital Media Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides