Programming charter motorola remote to eliminate 00 before channe

Charter 1060BC2 and 1062BC3 - Setup

www.urcsupport.com/html.php?page_id=762

SETUP. The Charter 1060BC2 and 1060BC03 Remote Controls are preprogrammed to operate the cable box (converter) provided by your cable system, an RCA TV, a Toshiba DVD player, and a Pioneer audio receiver. To control devices other than the default brands, perform the following steps; otherwise skip this section.

Program the Digital Cable Remote Control

mscharter.custhelp.com/app/.../program-the-digital-cable-remote-control

Dec 10, 2013 - Highlight or write down the codes and device you wish to programbefore moving on to Step 2. On the remote control, press a device key once (i.e., AUX, DVD , AUD, TV or CBL); it will blink once. Then, press and hold SETUP until the selected mode key blinks twice, then release SETUP.

Charter.net Charter Remote Controls - 1060BC2/1060BC3

www.charter.net/.../charter-remote-controls-106...

Charter CommunicationsProgramming Codes: Select the manufacturer of your device from the list. The codes will appear beside the list boxes. Not all manufacturer brands listed may be ...

Charter.net Charter Remote Controls - OCAP-4

Hi Cathy.

If you go to this site
Charter net Charter Remote Controls 1060BC2 1060BC3 and put in Sharp as the TV type, it both gives you instructions on programming the Charter remote, and gives you the codes for Sharp TVs (10818, 10093, 10688, 10851, 11602, 12360 in this case)
Hope that gets you up and running!
D

If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box.
http://electronicshelponline.blogspot.com/
http://remotesearch.blogspot.com/
http://electro-medical.blogspot.com/
http://electrohelponline.blogspot.com/

No. There is no setup code for Charter Cable, with this Motorola remote control

Do you know what model MOXI box you have? The new remotes weren't programmed to the MOXI 3012 box. If you have the Moxi MP12, BMC9012, BMC 9012F, BMC 9022 you will need to program the remote to the box.

1. Turn on the Moxi STB.
2. Press and hold the MOXI and OK buttons on the remote until the red LED at the top of the remote blinks twice.
3. After the red LED has blinked twice, release both buttons.
4. Using the numeric buttons on the remote, slowly enter 0, 0, 4. The correct entry of this code will cause the red LED to blink twice.
5. The remote is now programmed to operate the Moxi STB listed above. Go to “Programming the TV”.

I have the same problem. Any solutions out there?

I fixed the problem! I found a posting on a message board by someone who had the same DVR and a similar problem. This person found a way to access a secret menu in the DVR to override the format which is automatically assigned. I followed the same steps to access the menu on my DVR and then tried changing a few settings until I found the ones that worked--changing the automatic setting from OVERRIDE to STRETCH and changing the output setting from 1080i to 480p. (It's pretty pathetic that no one at Charter could fix this problem!) Here is the link to the posting that I used: http://www.avsforum.com/avs-vb/showthread.php?t=1132766

try goldstar codes

The user's guide and codes for the UR4-EXPG CHD2 is at:

http://www.charter.com/Visitors/GETBINARY.xbin?ID=1623.

Try this: On the Tivo remote press and hold the TV Power button and the Directv/TIVO button at the same time. Hold both buttons down for about 4 seconds or until remote light stays red. Then press the channel up button until the tv turns off. You may press the button over 100 times. You need to go slow. When the TV turns off press the enter button (or select button).