How do I see if my computer has a network card?

Remove the disk-drive from the computer, and connect it as a "slave" disk-drive on some other UBUNTU computer. Then, you can copy all mom's files to your computer. Then, put the disk-drive back into mom's computer, and reinstall UBUNTU, and copy all her files (over your private network) back to her computer.

What is your E: drive ?
Hard drive / USB drive / DVD drive / card reader ?
It depends on how many hard drives or partitions you have, E: drive can anything

Hi, purchase some canned air from an office supply store (at least 2 cans). Unplug the monitor and computer. use the canned air to blow out all the vent holes of the monitor. Then open the computer case and use the other can to blow out the computer - pay special attention to fans and power supply. If you have an add on video card.remove the screw and remove the card, reinsert in into the slot firmly and replace the screw. Close the case. Leave both unplugged for at least one day. Then plug both back in and use the buttons on the front of the monitor to enter the monitor menu. then use the menu to reset the monitor. Turn on the computer and check function.
Take care

Hi Rubee,
Please get into BIOS mode and check whether there is a flashing lines. If Yes, change your video card or contact your Hp technician.

This is by far the best video card you can get with tat machine affordable to


http://www.newegg.com/Product/Product.aspx?Item=N82E16814500154

Not sure what you are looking for. You can get a simple network card
BELKIN F5D5000 10/ 100Mbps PCI Desktop Network Card 1 x RJ45 - Retail

http://www.newegg.com/Product/Product.aspx?Item=N82E16833314101&cm_re=network_card-_-33-314-101-_-Product

From what I can tell, your computer uses PCI slots so .... you want to make sure you get a PCI network card and that it comes with drivers for your operating system.

Use device manager to remove the lan card, and then reboot. Vista will locate the lan card, and install it.

Try to start your EVO desktop in safe mode (press F8) before Windows loads.

Other things to try are a different graphics card or monitor.

Mike

The network card can be purchased online for apx. $10.00, yes she can replace the card easly, have her open the computer case with the computer turned off and the power cord unplugged. Locate the old pci network card, remove the screw holding the card, pull out the old card and insert the new card, put the screw back in, plug in the power cord and connect the cat5 cable, restart the computer. The found new hardware wizard will find the new network card, insert the CD that came with the new card and following the instructions on the monitor. BPCS

Hi alioops, unless you're using a laptop with the FS7600, normally you can't use or install the netgear wireless pc card (WG511;PCMCIA Card) to a regular desktop computer. If however, you're using a laptop, then you have to find a narrow rectangular slot normally at the side of the laptop with flip or hinge cover. Merely pushing in the Netgear Wirteless PC Card into the said slot would physically install it. Of course, it has to fit snugly and perfectly in order to work. Further you may have to install the drivers that are in a CD that comes with the card. Hopes this works for you. Pls post again how things turn up. Kind regards.