Question about Hampton Bay 73554 Antigua Ceiling Fan

1 Answer

Trying to find light kit for Model 56-ANTm Flemish Brass

I am trying to locate and purchase a light fixture for the Hampton Bay Antigua fan, model 56-ANT, UPC 0823924600006. Can you help.

Regards,
Ann r.

Posted by on

  • Anonymous Dec 23, 2008

    I have an antigua 56" ceiling fan with flemish brass finish that I would like to find a light kit to match also. I'm not sure if it's the same model number. the number on the box have is 278 753.

    Actually Home Depot has a light kit you can buy separately for $50, but it has alabaster glass and I want clear.




×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

Check the kit at home depot, get name and phone number of manufacturer and call them to see if they can supply the glass that you want.

Posted on Jan 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Locating heating element kenmore 80 series and a safety switch


If you are looking to purchase replacement parts, you can purchase on line at any of the following websites:

searspartsdirect.com
pcappliancerepair.com
appliancepartspros.com
repairclinic.com

Use your model number for your search criteria. Prices vary between these sites, so shop and compare. The first three sites listed also have helpful exploded view diagrams to assist in parts location/identification.

If you are trying to determine WHERE these parts are located on your dryer, please post back with a complete model number (located on a nameplate around the door opening) so I can determine how your dryer is configured.

If you have questions, please let me know. I hope this helps you.

Jan 14, 2010 | Kenmore 63942 Dryer

1 Answer

Location of Thermal Fuse


The thermal fuse is located near the heating element. The part number for the replacement kit is LA-1053. You can view an illustrated parts break down of your dryer at searspartsdirect.com. Just type in your model number and locate item 5 under the "Heater" section. Pay close attention to the instructions in the thermal fuse replacment kit. One thermostat is for a GAS dryer, one is for an ELECTRIC dryer. Read the instructions and make sure you use the correct one. If you have any questions, please let me know. I hope this helps you.

Jan 06, 2010 | Maytag PYE2300AY Electric Dryer

1 Answer

I have Natural gas and am moving where it will be hooked up to lP instead. What do I need to convert to LP from Natural Gas


you will need an L.P. conversion kit. the kit contains a small spring, a new brass orifice and a new brass cap that fits on the gas valve. some kits are minus the spring. you will most likely have to remove the burner to put the new orifice in. any appliance repair store will be able to order you the kit. have model and serial number handy. good luck with your move into the country.

Oct 20, 2009 | Kenmore Elite HE4 Electric Dryer

1 Answer

To convert from natural gas to LP


Check out the link that I am providing for information regarding the part you are looking for. http://www.repairclinic.com/Appliance-Parts?s=t-LDG712-%3d%3dc237

Here are the basics of the conversion process:

Make sure the gas is turned off and the dryer is unplugged from the power source.The first thing that you will need to do is purchase a gas dryer conversion kit. Extreme care needs to be taken when installing the kit and making the conversion, since there is a very obvious safety issue if the kit is not installed properly. The kit will consist of a brass fitting with a nylon pin sticking out of it. This is called the blocking pin. At the gas valve and regulator you will remove the plug on the gas valve (called a leak limiter) and replace it with the fitting containing the blocking pin that comes in the conversion kit. That will change the gas regulator pressure setting from gas to propane.
Next, you will have to change the orifice metering plug in2.gif the burner. This does just what the name implies... it meters the amount of gas that enters the combustion area. The fittings that come with the conversion kit (blocking pin and orifice metering plug) are made of brass, which is a soft metal, and since they are being connected to a much harder steel, make sure that the fittings are not overtightened. I generally use some pipe dope on the threads. Once the conversion is completed, you want to check for leaks. I generally mix up some soapy water and spray it around the fittings to check for leaks. Look for bubbling which is a sign that there is a leak. The last thing to do is to reassemble the dryer. Start it up and make sure that it is operating correctly and that there are no obvious smells that would indicate a leak. If so, shut down immediately.
These are the basic steps for a gas/LP conversion. If there is any doubt that you feel comfortable making the conversion, then I recommend that you contact an appliance technician for assistance. Hope this helped and best wishes.



Sep 29, 2009 | Dryers

1 Answer

My Hoover dryer model 4030D heavy duty needs a new


HI. you can order your timer by calling this number. this is a parts store that will ship your timer to your door step or mailing address..

1-866-925-PART (7278)

Just tell the Representative your model number and brand name of the affected unit and, they will search for it on there data base. when found, they will ship it to you after you purchase it.

Jun 18, 2009 | Hoover Dryers

1 Answer

WHISTLING NOISE-DAY AND NIGHT REFRIGERATOR MODEL # GSS201BPDWW


Pull the cover off to the fan and compressor housing and clean it. Clean coiling as well. Most coils are located under the unit. They make an appliance brush to reach between the coils that can be purchased at an appliance store.

Apr 18, 2009 | GE DBSR453EBWW Electric Dryer

2 Answers

Lg dryer - gas


If you do not have the original orifice you will have to order a natural gas orifice and replace the LP one with it. It is just a small brass threaded part with the correct size hole in it, located right at the end of the burner. For a LG dryer it is probably part number 4948EL4001B but you should get your model number from the sticker just inside the door and order the correct part from your nearest servicing dealer. You can find LG servicer's in the US on line at http://us.lgservice.com/index_b2c.jsp

Nov 02, 2008 | Dryers

1 Answer

WILL NOT START. LIGHT ON BUT WILL NOT START


Check the thermal fuse, located on the right side of the heater housing. If bad order LA1053 kit.
Fair warning it's a real patience tester to install correctly
6902309.jpg

Oct 16, 2008 | Maytag Dryers

1 Answer

Crosley dryer-model # cde6500w


I believe that you probably purchased a kit of fuses which provides fuses for several different types of dryers. That way the parts store can sell you the kit without knowing exactly what type of dryer you have. If I am right about this, there is no yellow fuse in your dryer, you will need to buy a new one to replace the red dot fuse. Also, you will want to find out what is causing it to blow again so quickly, probably your exhaust duct is a little plugged, causing the inside chamber to get too hot.

Dec 27, 2007 | Dryers

Not finding what you are looking for?
Hampton Bay 73554 Antigua Ceiling Fan Logo

Related Topics:

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hampton Bay Dryers Experts

Steve

Level 3 Expert

3287 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Fan Fair Of Boca
Fan Fair Of Boca

Level 3 Expert

1617 Answers

Are you a Hampton Bay Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...