Question about Canon PIXMA iP3500 Printer

2 Answers

Waste ink absorber full

I have a canon pixma ip3500 printer which shows waste ink absorber full contact your service administrator. can i solve this problem myself

Posted by on

  • mariomipaa
    mariomipaa Apr 20, 2013

    pixma ip 2770 gumamit ako ng service tools pag pree k sa main mag hung ang service tools application bakit po pls help me

  • Anonymous Mar 15, 2014

    the ink absorber is full and I am not sure what to do

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

It's Very Simple

Just Enter in Service Mode of your printer and clean absorbers count.
To enter in SERVICE MODE
1) Power off Printer
2) Push and hold "Resume" button and then push and hold "Power" button
3) Hold the Power button, then release and 2 times press Resume button
4) Led indicators must change
5) Release all buttons
6) Then printer in Service Mode
(If something wrong, repeat 1-6)

To clean absorber counter,
7) Press "Resume" Button 4 Times and after press Power button. It's all! Your absorber count is EMPTY!

In SERVISE MODE you can do several useful things:
To print Service Nozzles test, press "Resume" 1 time and press Power
To print EEPROM data, press Resume 2 times and press Power.

DO NOT press Resume 3 times and POWER. It will reset some EEPROM data settings

Any Question mail me: ossipenko(prettydoggy)gmail.com

Posted on Feb 05, 2009

  • Poinddexter Sep 27, 2010

    Worked like a charm!! Thanks!!!

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My printer is very broken in this so absorber full,it make reset manual,can helm me

Posted on Feb 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Canon ip3500 series the ink absorber is full contact the service center


This mayclear the ink absorber problem. There is ink absorbers located at both ends of the printerwhere the ink head move.
To dry the ink absorber, power up the printer and open the cover so the inkcartridges and print head will move to the middle of the printer.
Then take several sheets of absorbent tissue, fold it into a pad and place itinside the printer over the ink absorber on the far left hand side of theprinter to soak up the excess ink. You may need to change the absorbent tissuea few times. Then repeat the same procedure on the right hand ink absorber.
Close the lid and the printer should now function normally.

Aug 07, 2011 | Canon PIXMA iP3500 Printer

2 Answers

Canon ip3500 printer ink absorber almost full


You are looking at an aprox. 75% strip of your printer, the absorber sits at the bottom right had corner of the machine and it is a long drawn out procedure.
There are instructions for replacing and cleaning ink absorbers on You Tube and also instructions for resetting the printer. It is too involved and lengthy to try repeat here. Try looking at:-

http://www.youtube.com/watch?v=VVpjqBr7KjU

May 13, 2011 | Canon PIXMA iP3500 Printer

1 Answer

Canon MP460 Printer - the ink absorber is almost full. What do I do?


Before the waste ink absorber becomes completely full, contact a Canon service representative. (You will need to replace a particular part of the printer.) Canon recommends that you call for service as soon as this error occurs. Once the waste ink absorber becomes completely full, printing cannot be performed until the Waste ink tank is replaced.

Feb 20, 2010 | Canon PIXMA MP460 All-In-One InkJet...

1 Answer

MY Pixma IP90v has an error message waste tank full. Can I fix that myself or do I have to take to a repair station?


It's time to replace 3's WASTE INK ABSORBER KIT & reset waste ink counter.
The WASTE INK ABSORBER KIT is approx. USD10/pcs
You should send it to service centre

Oct 31, 2009 | Canon PIXMA iP90v InkJet Printer

2 Answers

The waste ink absorber is full.


You have to contact the Canon agent to get the waste absorber replaced. or you can continue it with pressing resume everytime.

Apr 23, 2009 | Canon PIXMA MP130 All-In-One InkJet...

3 Answers

Canon MP145 Ink Absorber Full Problem.


I got on error message when started to print.
It’s kept happened and message dialog box “The ink absorber is full” occurred.
Mine is Canon MP145.
Can somebody please help me , on how to fix this problem !
tq

Jan 13, 2009 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Printer says ''waste Ink absorber is full'' see service center


This is what the manual says: Ink used for cleaning is absorbed in a waste ink absorber placed in the machine. Press [OK] to cancel the error so that you can continue printing. Once the waste ink absorber becomes completely full, printing cannot be done until the waste ink absorber is replaced.
Canon recommends to contact a Canon service representative as soon as possible.

Nov 12, 2008 | Canon PIXMA MP150 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA iP3500 Printer Logo

3,767 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96576 Answers

old marine
old marine

Level 3 Expert

1472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...