Toshiba Error 05-0172-0017

Resolve Toshiba Error Code f3 f200 0002 normally happens temporarily and a system reset then disappears afterwards. You want to go through a number of possible reasons to find the exact reason for this.
Effective Methods to Overcome Toshiba Error Code f3 f200 0002: Whenever this error appears, you need to go through a number of possible reasons to determine the actual cause. This blog will help you to fix this Toshiba Error Code f3 f200 0002 with the help of step by step solutions. You can also connect with Toshiba Customer Care Service to get to the roots of the error.
Perform a system recovery on the computer to repair this Toshiba Laptop error as easily possible.
Recover your Hard Drive using the following steps:

• Shut your computer down by clicking on the Start and thus "Shut Down" button.
• Depress your system's power switch while holding the 0 key pressed.
• The Toshiba HDD Recovery Utility screen will appear as soon as the computer turns on.
• When you restore a hard drive to its factory default state, all partition on the hard drive and the data stored within it gets deleted. Make sure to back the important files before performing the restore process.
• Next, you need to press 1 to restore your hard disk to its original factory default state.
• An alert message will appear saying "all data will be overwritten and lost during the restore process". Back up the files before proceeding.
• After that click on Yes option to start the restoration process.
• You will be notified with a message saying the HDD has been restored.
• Press any key to restart your Toshiba Laptop.
• If the 0 key does not start the recovery process, it means that your system does not have an inbuilt recovery option. On such case, use the Toshiba recovery disk that comes with your Toshiba laptop.

Source URL: https://www.toshibasupport365.com/blog/how-to-resolve-toshiba-error-code-f3-f200-0002/

This error code with Toshiba usually indicates a bad hard drive, bad memory, or bad recovery discs. Download this drive fitness test HERE. It is an ISO image that you can dowload on another computer, burn the image to disc, and run it on your laptop to test your hard drive (bootable disk). You can download memtest 86 HERE in ISO form to test your system memory (bootable disk). I think you will find your answer with one of these tools.

I am glad to HELP YOU!


When you start to create the RECOVERY MEDIA your machine is creating a virtual file [a temporary one...] that includes all parameters and drivers and system files of your operating system; once the temporary file is done the recovery files are written on the indicated media [a hard drive or a DVD/CD].
Because of the huge size of the file [the temporary one] you need enough room for the virtual file to be created.
So you got your error message just because you DON'T HAVE ENOUGH ROOM on your hard drive.
My suggestion is: find an external drive [a USB attached hard drive] and make the RECOVERY MEDIA there. Meanwhile try to clean up a little bit your hard drive by using that application in Windows called DISK CLEANER [START > ALL PROGRAMS > ACCESSORIES > DISK TOOLS > DISK CLEANER].

My best regards!
... and don't forget to RATE, please...

do not believe you need replace the hard drive
i think you may have a registry error
you may have a application conflict or surface error

try booting in either step mode or safe mode

step mode will let you know where in the boot process the error occures

in safe mode you can run a registry utility like iolo system / registry mechanic
& run error checking

if you need neer to remove & backup your drive you can get a hard drive usb adapter cable set $10-$20 - less work

I download this from the Toshiba support site:
While running a full system recovery from the Recovery Media, the installation may fail -- and display one of the error messages listed below. Possible causes of these error conditions are listed at right. Use this list as a troubleshooting guide -- not as an absolute list of causes, as there may be others.
"An error has occurred. ERROR :10-FC10-1710" -- may be caused by a faulty hard drive.
"An error has occurred. ERROR :10-FC12-0241" -- may be caused by a faulty hard drive or defective memory.
"An error has occurred. ERROR :10-FC12-045D / 10-FC11-045D" -- may be caused by a faulty hard drive. *****
"An error has occurred. ERROR :10-FC06-0002" -- may be caused by damaged recovery media or faulty hard drive.
"An error has occurred. ERROR :10-FC12-0970" -- may be caused by defective memory.
*for this error 10-FC12-045D u nid to call 1-800-457-7777 toshiba advance technical support they will send it to depot or they will recommend ASP (Authorized Service Partner)

I suppose your recovery disks could be bad. You can get another set from Toshiba. I'm also concerned about the health of the hard drive. Did you need to run recovery because the system crashed, because it may not have been an operating sysem crash but rather a hard drive crash. Have the harddrive or whole laptop checked by a reoutable repair person or check my website: www.micromendllc.com

I had error 305: 69 when I tried to repair my sony vgn-ns160d using the recovery disc1. I called sony support and they told me that me hard drive was defective and needed to be replaced. they did not want to send me new recovery discs beause I was out of warranty. I copied the recovery disc at slow speed on another computer and tried rebooting the sony laptop with my fresh copy of the recovery disc. and it WORKED! it was not my HD that was defective it was their recovery disc! sonys support is non existent! trying to sell me a new hard drive!

It seems like your hard drive has some bad sectors.

You need to run some disk manager software to check/fix tour disk.

The best choice would be to download the "ultimate cd" from here

Boot from the cd, go to "hard disk tools" and select a disk manager (better to select the one from the same manufacturer of the disk).

Run a scan, and fix the drive (if it is possible). Then rerun your system restore cd again.


If the hard drive can't be fixed, you'll have to replace it before running the system retore.


Good luck!

Is you new hard drive lager than you old on and was the disk drive a factory replacement cause with those disks if you even change just that they will not work

This is one of two things, 1- an operating system error or glitch, a system repair with your recovery or operating system disc will fix it, or 2- a hard drive failure. If the system repair doesn't work, then reformat the hard drive and install a new operating system. If the drive will not format, or you have any issues during or after the install, then the hard drive is bad and will need replaced.