Question about Kitchen Ranges

1 Answer

Range flashing code f2eo

Stove flahing code f2eo

Posted by on

  • Anonymous Dec 22, 2008

    f2eo how 2 fix problem

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 36 Answers

F2 - E0 Shorted keypad (also called touch pad) 1. Check keypad connector for firm connection (keypad connects to control board).
2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock). F2 - E1 Keypad cable unplugged F2 - E5 Cancel key drive line open F2 - E6 Cancel key drive line open

Posted on Dec 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Error code F2EO


Hello Marie,

The F2EO error code means that button on the keypad has shorted out and the keypad(touchpad) needs to be replaced.

GENE

Nov 06, 2011 | KitchenAid KGSA906PSS Gas Kitchen Range

1 Answer

I am getting an error code f2eo and it is saying stuck key. No button will work.


Error code f2e0 means the touchpad is bad. Give me the part number, or go to ApplianceTimers.com, we may be able to repair it.

Mar 20, 2011 | Kitchen Ranges

1 Answer

Whirlpool Accubake F2EO


F2E0 is shorted key pad. You will need to replace keypad if the power shut down and reset does not work.

Mar 09, 2010 | Kenmore 95002 / 95004 Electric Kitchen...

1 Answer

F2 Error on Whirlpool Dual Fuel Range


I was baking and the stove suddenly changed to Maxi Broil and then to ERR F2EO Stuck Key. I cannot seem to change it by start or off or even turning the unit off and then back on. Any suggestions? Thanks.

May 11, 2009 | Whirlpool RF315 Dual Fuel (Electric and...

1 Answer

STOVE CODE FLASHING


f9 depicts a door lock error
3 specifies the latch lock lower sensor

Mar 01, 2009 | Maytag MGR5875QD CleanDesign Gas Kitchen...

1 Answer

Stove beeping


You have a fault in the range electrical system

FRIGIDAIRE

Range/Stove/Oven Fault Codes Version 3 Failure
Code
Condition Check/Repair F0 & F1 EOC (Electronic Oven Control) failure Replace EOC (Electronic Oven Control)





Jun 04, 2008 | Frigidaire FEF376 Electric Kitchen Range

2 Answers

Error


f2eo stuck key sign

Mar 26, 2008 | KitchenAid Kitchen Ranges

1 Answer

Kitchen Aid Gas Range, Model KGR 1801


F2 - E0 Shorted keypad Replace Electronic Range Control/Clock(ERC) theres the bad news its reading a stuck key pad. replace the control..
there may be a good side and that is depending on age of machine they usually come with a 5 yr part warr on their electrical components, in which case youd only pay service and labor to install it

Mar 20, 2008 | Kitchen Ranges

6 Answers

Oven beeping f1 and f3


Here are the error codes for your range:

F1 Circuit board defective Replace control board F2 1. The oven temp has risen above 665F and the door is not locked or
2. The temp has risen above 965F with the door locked 1. Check oven temp in mode that failure occurred. Replace EOC (Electronic Oven Control) if above limits
2. Check 8-pin connector. Check and replace oven temperature sensor if necessary F3 Oven temperature sensor is open (above 3000 ohms) Check resistance of oven temperature sensor, check for open wiring between oven temperature sensor and control F4 Oven temperature sensor is shorted (below 500 ohms) Check resistance of oven temperature sensor, check for shorted wiring between oven temperature sensor and control F5 Internal watchdog circuit has detected a failure Defective EOC (Electronic Oven Control) F6 Shorted buttons Check push buttons and dome switches on control F8 Logic interrupted (lock motor switch sequence) Check door lock switches and wiring

Most likely problem is the oven temp. sensor. Should check around 1100 ohms at room temp. I would replace that first because it is the easiest and cheaper than an oven control.

Nov 22, 2007 | Kitchen Ranges

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

905 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...