Question about AviStart 5303 2-Way Security / Remote Start System

# Can anyone help me get my stereo unlock code for a 98 tahoe?

I put a new battery and my stereo locked. i got the six digit number by holding the 2 and 3 buttons and the am/fm button.
that number is (902-910), can anyone help me get the 3 or 4 digit unlock code from this.

Posted by on

• Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

• Contributor

Hmm that is realy a problem because this is security lock for stealing car radios.. you must have a 4 digit number on smal paper and a serial number on it alsso,but the solution is also to call the factory of the radio and thel them your serial on radio and thay will give you your 4 digit number PIN when you confirm you bought your radio leagaly

Regards,bis3946

Posted on Jul 14, 2009

• Level 1:

An expert who has achieved level 1.

• Contributor

What kind of car have u got?

Posted on Dec 17, 2008

• Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

• Contributor

For my 99 tahoe its 916 hr button 09 min button 16 hit am/fm button and on comes the radio. Hope this helps

Posted on Nov 03, 2009

• Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

• Master

I will have to code for you tomoorw. I am assuming it is GM delco radio.

Posted on Aug 31, 2009

• Philip Armitage Sep 01, 2009

turn key on, use your hr for 06

then use your min for 15

then press am/fm

sec will display

press power button radio will turn on.

• Philip Armitage Sep 01, 2009

turn key on, use your hr for 06

then use your min for 15

then press am/fm

sec will display

press power button radio will turn on.

×

• Level 1:

An expert who has achieved level 1.

Problem Solver:

An expert who has answered 5 questions.

• Contributor

Since you already found the 6 digit code all you need is \$6.99 and go to this site: http://www.DelcoLockCodes.com. they will email it to you and this is an official site so it should be pretty safe unless your radio is stolen!

Posted on Aug 19, 2009

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
Goodluck!

Posted on Jan 02, 2017

×

my-video-file.mp4

×

## Related Questions:

### The radio is locked on a 1995 oldsmobile 88

How to Unlock a Chevy Radio Step 1: Start the vehicle and turn on the radio.
Step 2: Press and hold preset numbers 2 and 3 until a three digit code appears on the radio display. Write this code down.
Step 3: Press the AM/FM button. Your radio will display a second three digit code. Write the second code down. You will now have a six digit code.
Step 4: Call the Chevy Radio Code phone line at 1-800-537-5140.
Step 4: Enter 106010 followed by the # key to direct you to the radio code retrieval system.
Step 5: Enter the six digit code you retrieved in steps 2 and 3 followed by the * key. They must be in order. You will be given a four digit radio code. Write down the radio code.
Step 6: Start your vehicle and turn on the radio. Using the Minute and Hour buttons, enter in the four digit radio code to your stereo system. Press the AM/FM button to unlock your stereo.
How to Unlock a GM Radio Step 1: Start the vehicle and turn on the radio. The radio will display "LOC" indicating the Theftlock system is activated.
Step 2: Press and hold preset buttons 1 and 4 for ten seconds. (If you don't have a fourth preset button, press and hold presets 2 and 3.) The radio will display a three digit number. Write this number down.
Step 3: Press the AM/FM button. Your radio will display a second three digit code. Write the second code down. You will now have a six digit code.
Step 4: Contact your local GM Dealer and give them the six digit code. They will give you a four digit radio code.
Many dealers will give you your radio code for free, while others may charge a small fee. If your dealer is charging a larger fee, consider calling another dealer or doing a Google search for sites offering GMC Radio codes. They usually charge a small (around \$10) fee.
Step 5: Start your vehicle and turn on the radio. Press the Hour button on the radio until the first two number of the code appear. Next, press the Minute button until the last two numbers of the code are displayed. Once all four digits appear, press the AM/FM button to unlock your stereo. The display will read "SEC" indicating you have successfully unlocked your radio and it is fully operational.

Jan 30, 2014 | Cars & Trucks

### Cd Code need code for am fm / CD /cassett player purchased at junk yard out of a 2000 Suburban and putting it into my 2010 Chevy Colorado which has only basic am / fm radio? How do I get past "locked"...

That is a security "feature" on GM radios to deter theft. The following instructions has had sucess with other GM vehicles. If not, only a dealer has the equipment to get past lock screen.

This works on vettes with theftlock. Try it on the tahoe and let us know....

The following procedure will give you a new code that you can use instead of your personal code. Using this new code, you can "unlock" your radio and then "re-lock" it with a new code if you wish. Prerequisites: The radio must be in LOC mode NOT in INOP mode. Let me explain. If you have activated the Theft-Deterrent feature of your radio and loose power, the radio goes
into LOC (theftlock) mode. With the ignition on, you must use the MN and HR buttons to enter you personal code in order to unlock it (The instructions are on page 3-27 in your Y2K Owner's manual). If you fail to enter the correct code eight (8) times, the radio goes into INOP
mode. You have to wait an hour with the ignition on before the radio returns to LOC mode (go for a long drive somewhere).

Procedure: 01. Turn the ignition ON (The radio displays LOC)

02. Hold down the Radio Presets 2 and 3 buttons for six seconds

03. The radio display changes from LOC to a three-digit number. Write this number down. Don't take forever, fifteen seconds max before the next step.

04. Press the AM/FM button

05. The radio display changes to another three-digit number. Write this number to the right of the first one.

06. You now have a six-digit number, the first three digits are from STEP 03 and the last three digits are form STEP 05

07. Call 1 800 537 5140

08. Press 1 then # (pound). You'll hear "Invalid Code, try again"

09. Press 139010 then # (pound). You will be asked to enter your four or six digit code followed by * (start)

10. Enter the number from STEP 6 then * (star)

11. Listen to the four-digit number and write it down. It will be repeated twice

12. Turn the ignition ON (The radio displays LOC)

13. Use the MN and HR buttons to enter the code from STEP 11

14. Press the AM/FM button. The radio display changes to SEC Your radio is now "un-locked" and usable. The Theft-Deterrent feature is STILL active! If you want to disable it, use the instruction on page 3-27 in your Y2K Owner's manual. Use the code from STEP 11 instead of your personal code. Note: This tip originated from LOTZAHP, Austin TX (credit must be given where credit is due). I verified it on an Y2K C5 with a locked radio - mine.

Aug 19, 2013 | Chevrolet Cars & Trucks

### My 2008 chevy uplander , had to change radio (cd player not working) now radio is locked, how can I unlock it?

Try this: How to Unlock a Chevy Radio Step 1: Start the vehicle and turn on the radio.
Step 2: Press and hold preset numbers 2 and 3 until a three digit code appears on the radio display. Write this code down.
Step 3: Press the AM/FM button. Your radio will display a second three digit code. Write the second code down. You will now have a six digit code.
Step 4: Call the Chevy Radio Code phone line at 1-800-537-5140.
Step 4: Enter 106010 followed by the # key to direct you to the radio code retrieval system.
Step 5: Enter the six digit code you retrieved in steps 2 and 3 followed by the * key. They must be in order. You will be given a four digit radio code. Write down the radio code.
Step 6: Start your vehicle and turn on the radio. Using the Minute and Hour buttons, enter in the four digit radio code to your stereo system. Press the AM/FM button to unlock your stereo.
How to Unlock a GM Radio Step 1: Start the vehicle and turn on the radio. The radio will display "LOC" indicating the Theftlock system is activated.
Step 2: Press and hold preset buttons 1 and 4 for ten seconds. (If you don't have a fourth preset button, press and hold presets 2 and 3.) The radio will display a three digit number. Write this number down.
Step 3: Press the AM/FM button. Your radio will display a second three digit code. Write the second code down. You will now have a six digit code.
Step 4: Contact your local GM Dealer and give them the six digit code. They will give you a four digit radio code.
Many dealers will give you your radio code for free, while others may charge a small fee. If your dealer is charging a larger fee, consider calling another dealer or doing a Google search for sites offering GMC Radio codes. They usually charge a small (around \$10) fee.
Step 5: Start your vehicle and turn on the radio. Press the Hour button on the radio until the first two number of the code appear. Next, press the Minute button until the last two numbers of the code are displayed. Once all four digits appear, press the AM/FM button to unlock your stereo. The display will read "SEC" indicating you have successfully unlocked your radio and it is fully operational.

Dec 10, 2012 | 2008 Chevrolet Uplander

### My stereo says locked on my chevy cobalt 2010

see this procedure and fix it. God bless you
• 1 Start the car and turn on the radio.
• 2 Press down on preset numbers two and three until a three-digit number displays on the radio. Write this number down.

• 3 Push the AM/FM button and a new three-digit number will display. Write this number down to the right of the original number, to create a new six-digit number.
• 4 Call 1-800-537-5140. This is the radio code phone line.
• 5 Enter 106010, and then press #. This is the Chevy radio dealer code.
• 6 Type in the six-digit number you had at the end of Step 3, and then press *. The phone line will then give you a four-digit number. Write this down.
• 7 Use the Minute and Hour buttons on the radio to type in this code, and then press the AM/FM button to unlock the radio.

Oct 13, 2012 | Cars & Trucks

### I need the radio unlock code for a 98 grand prix

The following instructions will allow you to reset any GM (General Motors), Cadillac, Oldsmobile, Buick, Pontiac theft lock radio.

Requirements: the theft lock radio must be in "LOC" mode.

Procedure:
1. Turn the ignition ON (The radio should display "LOC")
2. Hold down the Radio Presets 2 and 3 buttons for six seconds
3. The radio display changes from LOC to a three-digit number. Write this number down. You now have fifteen seconds to complete the next step.
4. Press the AM/FM button
5. The radio display changes to another three-digit number. Write this number to the right of the first one.
6. You now have a six-digit number, the first three digits are from STEP 03 and the last three digits are form STEP 05
7. Call 1-800-537-5140
8. Press 1 then # (pound). You'll hear "Invalid Code, try again"
9. Press 139010 or 106010 or 206010 or 202107 then # (pound). You will be asked to enter your four or six digit code followed by *
10. Enter the number from STEP 6 then *
11. Listen to the four-digit number and write it down. It will be repeated twice
12. Turn the ignition ON (The radio displays LOC)
13. Use the MN and HR buttons to enter the code from STEP 11
14. Press the AM/FM button. The radio display changes to "SEC". Your radio is now "un-locked" and usable.

If you fail to enter the correct code eight times, the radio goes into INOP mode. You have to wait an hour with the ignition on before the radio returns to LOC mode.

Hope this helps; keep in touch.

Dec 17, 2010 | 1998 Pontiac Grand Prix

### I dont remember the phone lock code of motorola v3i

Your phone’s four-digit lock/unlock code is originally set to 1234.
The six-digit security code is originally set to 000000.

If you forget your unlock code: At the Enter Unlock Code prompt, try entering 1234 or the
last four digits of your phone number. If that doesn’t work, press and enter your
.

Jun 24, 2009 | Motorola Mobility RAZR V3i Cellular Phone

1. Turn the ignition ON (The radio displays "LOC").
2. Press and hold presets buttons 2 & 3 or 1 & 4 for approximately 10 seconds.
The radio display changes from "LOC" to a three-digit number. Write this number down. If you have a Saturn or GEO, see note below and skip to step 5.
Don’t take long, fifteen seconds max before the next step
3. Press the AM/FM button. The radio display changes to another three-digit number. Write this number to the right of the first one.
4. You now have a six-digit number, the first three digits are from STEP 2 and the last three digits are from STEP 3, so you will have a number like this ( 212 - 212 )

DO THIS AND GIVE ME THE CODE YOU GET AND I WILL GET U UNLOCK CODE

Oct 01, 2008 | 1998 Chevrolet Tahoe

### Original stereo in audi 1991 90

i have the original book it says anytime the battery is disconnected it will do the lock up and read SAF on the display when this happens you cant use it again untill you unlock it... to unlock it turn the radio on the word safe will be displayed first press the am/fm button and then press the scan button and hold them down simultaneously until "1000" appears in the frequuency display release the buttons DO NOT UNDER ANY CIRCUMSTANCE CONTINUE HOLDINT THE BUTTONS DOWN OR PRESS THEM ONCE AGAIN THIS WILL CAUSE THE RADIO TO TAKE THE NUMBER "1000" AS THE CODE NUMBER. using the first four radio station buttons enter the code number found on your radio card (the codes you have) use button 1 to set the first digit of the code button 2 to set the second digit etc. the first digit of a four digit code must be "1" if your code number has three digits the first digit on the display must be set blank. Once the code is shown on the display press and hold the am/fm button and scan button simultaneously until the work safe appears in the frequency display release the buttons a radio station frequency will automatically be displayed ... MAKE SURE YOU PUT IN THE RIGHT NUMBER OR YOU WILL LOCK UP THE RADIO AGAIN AFTER 2 TRYS AND WILL HAVE TO WAIT AN HOUR BEFORE YOU CAN RETRY IT. IF YOU LOOSE THE CARD WITH THE NUMBER SEE YOUR AUDI DEALER

Aug 24, 2008 | 1991 Audi 90

### I have a 1999 chevy lumina LTZ and i change the battery after that my cd player locked asking me a code so can u please help me how to unlock the code. Thank you

Search the net for "Delco unlock codes" OR "Delco security codes" you should easily find a set of instructions telling you to get a code from your radio and then call an 800 number. Follow these instructions. This will give you the factory unlock code for your stereo. Worked for me and for heaven sakes don't pay anybody for this information - it's free.

Aug 04, 2008 | 1997 Chevrolet Lumina

Below worked for me just two days ago... you DO NOT NEED to take it to the dealer and you do NOT need to disconnect the battery, this can all be done with a couple clicks on your radio and call into a phone number.
This was posted previously on another post...
Procedure:
01. Turn the ignition ON (The radio displays LOC)
02. Hold down the Radio Presets 2 and 3 buttons for six seconds
03. The radio display changes from LOC to a three-digit number. Write this number down. Don’t take forever, fifteen seconds max before the next step.
04. Press the AM/FM button
05. The radio display changes to another three-digit number. Write this number to the right of the first one.
06. You now have a six-digit number, the first three digits are from STEP 03 and the last three digits are from STEP 05
07. Call 1 800 537 5140
08. Press 1 then #. You’ll hear Invalid Code, try again
09. Press 139010 then #. You will be asked to enter your four or six digit code followed by *
10. Enter the number from STEP 6 then *
11. Listen to the four-digit number and write it down. It will be repeated twice
12. Turn the ignition ON (The radio displays LOC)
13. Use the MN and HR buttons to enter the code from STEP 11
14. Press the AM/FM button. The radio display changes to SEC

Mar 12, 2008 | Car Audio & Video

## Open Questions:

#### Related Topics:

504 people viewed this question

Level 3 Expert

Level 2 Expert