Tv acts like its going to turn on, but then shuts back off
I press the power button it sounds like its going to come on but then it makes a loud pooping sound and shuts back off. the standby/timer LED comes on and blinks 15/16 times waits three sec and then blinks two time. it does not stop until i pull the plug. plz help
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Make sure your TV is set to Cable (Manually), Then with you TV on, hold the cable button down, and keep pressing the power button, till the TV shuts off...this should set your remote to cable mode! When you turn back on, press cable button then power!
You may have to repeat the steps, for the TV to come back on, to re-program your remote!
Press the TV button on the remote, make sure the TV is plugged in, check the electrical outlet to make sure it is live if the TV does not turn on. If these actions do not solve the problem, press the Power button on the front of the TV. If the TV turns on, replace the batteries in the remote control and reset it by pressing the number 1 button for 60 seconds. If necessary, reprogram the remote.
Unplug the TV for two minutes, then plug it back in if the buttons on the remote don't work. Make sure the remote is in TV mode.
Change the settings on the sleep timer if the TV turns off unexpectedly. Unplug the TV and wait five minutes before plugging it back in if necessary.
Check your antenna connections and cables if the sound is okay but the picture is poor. If all the connections are good, adjust the sharpness function.
the relay is the safety protective device..sometimes a defective component or something. maybe an overloaded power supply might caused this problem..so before any thing could gets worst..the relay will shut the unit..
How to do an auto search for a Livewire Rm-300f+ Universal Tv Remote. These cheap (£1.00) remotes are available from poundland, etc.
1) Turn on your TV, ensure it it tuned to a channel and the sound is on. 2) Press the [set] button for about 5 seconds, until the LED stays on. 3) Press the MUTE button, the LED should flash twice. 4) Point towards the TV and press the power button. Don't worry if nothing happens. 5) Press and release the power button every second or so, eventually (for me about 120 times) the sound will go off. NOW press the [set] button to confirm your setting. 6) Pressing the power button again should switch the TV off. If not you're going to need to go through it all again.