Question about Samsung TX-R2765 TV

1 Answer

During dark images on my TV, several green lines are visible across the TV.

I bought new Samsung TX-R2765 from a local store at a huge discount ($180 for a $450 TV). The reason was that the TV had a few cosmetic damages obtained during a storm. The TV had no manual or anything with it, even 2 A/V inputs are covered with a diagram where they should be. Besides the green lines covering the TV, the pictures changes from clear to fuzzy. The words become unreadable, but they might come into focus a few minutes later. Any Ideas??? Thanks for the help and have a great day!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has answered 200 questions.

  • Expert
  • 236 Answers
Re: During dark images on my TV, several green lines are...

You may have an arc in the screen and focus circuits. Water may have gotten into these circuits causing a delayed reaction. (Circuits Corroded). These circuits at least part of them are a part of the high voltage transformer (flyback). Your picture tube socket has spark gaps inside of it too which may be arcing. You need to have it checked by a tech to find out just what is arcing. Stargazer

Posted on Mar 11, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

RCA TV older big back 36" went out during power outage storm, back on with good volume but pictur only a thin line in middle of screen across

People are giving away their older TV's as they upgrade to new wide flat-screens nowadays. That makes your TV not worth fixing. Keep checking Craigslist and your local thrift stores for one that's cheap or being given away.

Jan 03, 2015 | Standard (CRT) Televisions

1 Answer

The color on my Samsung Slim Fit TV suddenly blipped to pink and blue. When I turn it off and back on, it comes on with a green line across the middle of the screen. What's up?

This line shows that there is failure of vertical output stage,may be due to high supply from internal power supply of TV set,check the voltage of the vertical output stage,and after rectification of supply problem replace vertical output IC to get this problem solved.

Feb 08, 2011 | Samsung SlimFit TX-T2782 HDTV

1 Answer

Samsung TX-R2765 not turning on.

I have the exact same problem!! Did you ever get a solution for your problem dkwb71?

Jul 18, 2010 | Samsung Standard (CRT) Televisions

2 Answers

Samsung DLP TV; Green Lines

If you get green vertical bars or green dots in the picture but not in the menu screen (Digital board symptom)

Feb 28, 2010 | Samsung DLP HL-P5663W 56" TV

1 Answer

Our Samsung Model HLP5063WX/XAA - dark images

I suspect that you may need to replace the ballast for the lamp and the power supply board.

Oct 30, 2009 | Samsung DLP HL-P5663W 56" TV

2 Answers

Samsung tx-r2765

I was working on this model with the same problem. It is shutting down because the +14 was missing from the vertical IC. I traced it back to a resistor that had burnt. I have no way of knowing it's value because I have no schematic. If you find what it is, please post.

Feb 28, 2008 | Samsung TX-R2765 TV

1 Answer

Sudden color/picture distortion

you have a shorted green CRT that is affecting the other crts the short is internat to the crt that leaves what is called retrace lines. if the set is more than three years old then replace all three guns.

Feb 25, 2008 | Samsung TX-R3080WH 30" TV

1 Answer

Black line running horizontally across TV screen

A line on an LCD, either horizontal or vertical usually means the video driver board is defective or the screen is defective, does it show up as black even on a dark screen? That means a line of LCD "shutter"s is not working and there is a problem that cant be fixed by a reboot or channel change. Bummer.

Feb 17, 2008 | Standard (CRT) Televisions

1 Answer

Strange image on Samsung DLP TV.

Light engine replacement.....go thru SS authorized service so
you can lay the pressure on them........T.

Dec 02, 2007 | Samsung DLP HL-P5663W 56" TV

1 Answer

Picture Inconsistency (Blurring)

Keep in contact with Samsung or the repair depot, as they may hook you along till the warranty is up and then want to charge you big bucks. Ok if your not happy with this set, go back to the store where you bought it, and compair it with one they have on the floor. If there are not any, tell them your not happy with the set and see what they will do about it. If you get no where with them, contact Samsung directly and they are easaly found online. If you need a URL I will be more then happy to supply it. Good Luck

Oct 07, 2006 | Samsung SlimFit TX-S2783 TV

Not finding what you are looking for?

Open Questions:

0 Answers

Samsung CS-29M20SPQ raster are shifted to right-upper corner. In my Samsung CS-29M20SPQ S61B chassis ( Schematic Diagrams - 200504/20050407144315562_s61a_sdiag.pdf ) raster are shifted to right-upper corner so the left and bottom arise blank space approximately 1cm width through all video input ( SCART-RGB/YCbCr/YPbPr, S-Video, Composite ) except for signal from inner tuner. It mostly well-marked when DVD playback UEMT ( Universal Electronic Measuring Table - Russion analog Indian Head or Lion Head ) generated by MATHLAB and stored on CD as .jpg pictures with resolution from 640X480 to 1024x768. I supposed that it glitch DVD's FW module responsible for pictures output. Then i record .mpg clip composed from UEMT.bmp - selfsame outcome. Then i attach Saphire Radeon 9600 Pro S-Video output to TV's S-Video input and examine UEMT.bmp immediately from my computer - selfsame outcome. Using ATI Catalyst Control Center ( 2007.6320.2246.38712 ) i shift picture down as much as possible and enlarge picture size to the maximum - bottom blank space is all the same ( . But if use OVERSCAN mode in Catalyst Control Center - bottom blank space is disappear, but picture's borders are exceed visible area and picture are truncated ( ). I compare input circuit from CS-29M20SPQ ( ) with Micronas VSP 9402A Data Sheet reference circuit ( ). Samsung very complicate input circuit. May be that is radix malarum ( the root of all evil ). Whether rational that complication. I make apology for my bad English :-( . TIA

Apr 14, 2007 | Samsung TX-R2765 TV

Samsung TX-R2765 TV Logo

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66552 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides