Question about Crosley CEDC392JQ Electric Portable Dryer

1 Answer

Dyer my model is cde7000w it stop working while drying a load of clothes it is not the breakerthe dryer does not turn on any ideas thank you jesse

Posted by on

  • jesse peters Mar 14, 2007

    the light was burn out so i bought a new one and it doesn't work thanks jesse



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 878 Answers

Jesse, does the door light come on? If not check the thermal fuse. You will have to open the top by pushing in on the two clips on each side. In back, on the right side of the heater you will see a thermostat and about 4 inches below the thermal fuse. Look at number 5 in the attachment. Makes sure to kill the power before going back there. You can either jump it out or ohm it out to make sure that is the problem. Part number for the fuse is LA1053.. back

Posted on Mar 12, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Gas dyer not staying on, all the light are flashing

Does your model have sensor strips inside? Wash them with windex to remove any moisture barrier on them. They sense wetness and if they don't feel any wetness they make the control think them clothes is dry and it shuts down the dryer thinkin them clothes is dry.

Jul 09, 2012 | Frigidaire Dryers

1 Answer

GE DSXH43EAWW dryer stopped working mid cycle

unplug it,take it apart and check it out,you could have snapped the belt,there's a belt switch so if the belt breaks the dryer won't start,or if you haven't taken the dryer apart and cleaned it out and also the vent line you could have popped one of the t-stats,only way to tell is by checking them with a meter.the dyer should be cleaned out once a year ,if not the air can't move freely and one of the t-stats will pop as a safety,the dryer will run to hot and take out the thermal fuse or the high limit t-stat,if it's been taking longer to dry the clothes or if you see lint stuck to the bottom of the dryer door these are signs of bad air movement and the dryer and vent line needs to be cleaned out.

Dec 30, 2017 | GE DSXH43EAWW Electric Dryer

1 Answer

Kenmore 11066912690 dryer stops working

if you are using the sensor drying cyle this could cause the unit to stop. it will detect the most dry clothing first usually light clothes that dry faster.if not and you are useing timed dry the most likely cause is a faluty timer,or a thermostat sesnor is going bad and turnoing off the dryer before the clothes are dry

Sep 16, 2009 | Kenmore 62602 Electric Dryer

1 Answer

My dyer will not dry the clothes

First unplug your dryer from the electrical outlet. Next pull your dryer out from the wall. DIsconnect your flex outlet hose from the dryer and make sure it is not stopped up with lint etc. Next check the wall adapter to make sure it is clear of lint etc going to the outside of the house. If both of these are clear look inside the dryer outlet by looking in the tube where the flex hose was connected. You will need a flashligt to do this. If there is anything stopping it up remove it. If your dryer is getting hot but not drying there is probably something keeping the air from going out of the dryer to the outdoors.

Apr 01, 2009 | Whirlpool LER5636P Electric Dryer

1 Answer

Whirlpool Electric Dyer Problem

most of the time the dryer vent hose,wall vent and dryer vent hole must be clear to allow the dryer to vent,also you can pull dryer hot put you hand on the dryer vent hole turn on and see if it is venting this will let you know if the blower wheel is turning, let me know what you find-mike

Sep 25, 2008 | Whirlpool Dryers

1 Answer

Crosley dryer

Let the machine sit for about an hour and try again. Let me know what happens. Would like to know the reason the motor was replaced.

Jan 26, 2008 | Crosley CDE6000 Electric Dryer

Not finding what you are looking for?
Crosley CEDC392JQ Electric Portable Dryer Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Crosley Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

Are you a Crosley Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides