couldnt find a 3600 listing so posted into this instead.
I have a omni 3600 hand-held device when i plug it in to charge the battery which are below critical level the leds on the screen flash for about 30 seconds and then go off, the battery is not taking any charge - any ideas what i should try first? I do not have a base unit with the device.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Is the hotel line going through a switchboard? If so you might need to add a 9 or whatever number is required to dial an outside line, to the number it tries to dial. Or maybe it's the opposite. Maybe at the office it's dialing out and it's set up that way and at the hotel it might be a direct line and you will need to remove the 9 or whatever number is required to dial an outside line. Or the line quality is too low. Or maybe you need a microfilter if the line has adsl broadband on it.
What you need is the developers kit from Verifone. That includes all coding and compilers including calibration docs that you are looking for. Call Ken Elderts (951) 775-9099 Ken_Elderts@verifone.com tell him you need the programmers kit and he will either get it for you or help you get a hold of the right person at Verifone let him know you talked to Harris from US Merchant Systems. Try this as well. http://www.verifone.com/PDF/guides/23431.pdf
What type of application is this for POS, retail, rest, medical, automotive? Give me a call when you can. Thanks
The link above is to a quick guide for merchants. Cut and paste same as first link.
I hope this helps you and is what you are looking for. If it is please rate my help as Fixya. If you need more info contact me by posting more detailed information on what you need and I will get it for you. Thanks for taking the time to rate my help. George
HI, What you need to do is put in a static IP address. To do this, connect a computer to the router and get you IP address then add it to the terminal comm. Port settings. IF you need further assistance email me @ firstname.lastname@example.org