Question about Toro Blowers Rake and Vac - Electric Blower/Vac - 51573
1990 Toro model 38080 in the slowest speed it begins to throw snow just fine. After about five feet of travel, the discharge begins to reduce until there is no snow coming out of the chute. The motor runs but the auger has stopped. If the thrower sits still, in neutral for a moment, the snow bubbles out of the base of the chute until enough snow clears then in a few moments the snow comes from the chute graduallly with more force until the chute is clear and the auger gradually returns to normal running speed. I just replaced both the drive belt and the auger belt. My concern is that I will over tighten the auger belt. I had the same problem before I replaced the auger belt.
The problem could be the snow is to heavy for the motor to keep up, if thats the case you may need to upgrade to a more powerful model or try not to overload it. take it a little slower so the motor can keep up. but try tightening the belt. with your pointer finger push down on the belt it should have about a half inch give, if it moves more than that its too loose and probably slipping under load
Posted on Dec 13, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 03, 2016 | Garden
Mar 14, 2017 | Garden
Dec 08, 2010 | Mowtownusa Snow Thrower Starter Switch for...
Jan 09, 2010 | Mowtownusa Snow Thrower Starter Switch for...
Jan 08, 2010 | Mowtownusa Snow Thrower Starter Switch for...
Dec 26, 2009 | Toro Lawn Mower With Toro Power Tools
Dec 23, 2009 | Mowtownusa Snow Thrower Starter Switch for...
1,944 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: