Question about GE Profile Spectra JGBP90 Gas Kitchen Range

1 Answer

GE XL44 range

I am running propane (8 years). My oven lights properly, but has a "jet engine" type of noise and stinks like burnt propane. I can probabaly fix or replace something - but where do I start?

Posted by on

  • Carl Schulzetenberg
    Carl Schulzetenberg May 11, 2010

    Are the top burners working fine?

    Has this been since new?

    Also, please list model number.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 162 Answers

That means that the flame is lighting at the orifice. that's where the burner sits on, pull out the broiler drawer, and stand back, turnd on the oven and take a look at that part of the orifice. you can pull down the pilot a bit lower, it can not be touching the holes of the burner, not that close, and it needs to be lower then the burner, that will stop the problem.

Posted on Dec 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Xl44 GE GAS RANGE OVEN WONT WORK, RED LIGHT IN


Hi,

The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter


heatman101



czvb



May 09, 2010 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

I have a ge profile xl44 oven and do have the


I just converted aXL 44 from natural gas to propane and I don't have a manual for it do I need to do anything for the oven part?
Also how do I light the pilot light or do I need to?
Greg

Jun 28, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Oven burner makes a popping or whistling sound during baking cycl


STOP>>>>STOP{>>>STOP>>>
You have a gas leak in the oven.
Get this fixed immediately.

Feb 09, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

GE XL44 propane to natural gas conversion.


your going back to natural from LP??? of so tyhere is no new orifice , but hte "hood" on the end of the bake, needs to be adjusted out"loosened", LP the "hood" is secured snugged down,

Jan 11, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

XL44 Gas Range will not light


Kinda sounds like the hot surface igniter is out. It is located under the oven section under the bottom panel. They are relatively easy to replace except you need that oven today I'm sure. Let me know how it turned out.

To replace the hot surface you need to take the bottom panel off and access the assy you need a 1/4 nut runner and remove couple small screws unplug the igniter take it to a parts house and 12 to 20 dollars later you're good as gold. When I say parts house appliance parts.

Nov 27, 2008 | GE Ovens

1 Answer

GE XL44 Working fine but awful burnt propane smell


Remove the burners and clean them with EASY OFF oven cleaner. The passages are likely plugged and this causes incomplete burning of the gas. If you do smell raw gas shut the gas to the stove off RIGHT AWAY and call the local gas supplier.

May 12, 2017 | Kitchen Ranges

1 Answer

Converting GE XL 44 Gas range from propane to natuiral gas


I needed parts for my GE XL44 propane converted stove. This site was very helpful. I found the part and there is online live help or toll free help. Go to: AppliancePartsPros.com

Thanks,
nnb704

May 23, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

XL44 Self Cleaning Gas Range


your set up foir the wrong type of gas
you probaly have a natural gas oven
'and your using propane

Dec 16, 2007 | GE JGBP24 Gas Kitchen Range

4 Answers

GE XL44 Gas Stove


Hi I have a GE X44 gas stove. The 4 top burners work just fine, but the oven no longer turns on. I don't see the blue flame inside the oven. Is it safe to relight the pilot light?????

Nov 08, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

GE XL44 and soot from burners


propane burns very dirty.you need to remove the burners and orfices and clean them good with oven cleaner.make sure their rinsed and dried well before installing,this should solve your problem.

Nov 08, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

Not finding what you are looking for?
GE Profile Spectra JGBP90 Gas Kitchen Range Logo

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Ismael Rodriguez...

Level 2 Expert

162 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...