Question about Logitech Quickcam Chat Webcam

1 Answer

Hello, my webcam while chating is not showing a video, iam abel to see other person ,but my picture is showing complete black, the same other person is not abel to see my pictuer except black

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:

  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

C. Windows Live Messenger:

  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Feb 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The camera shows me but i cannot see the peson


Your camera is designed to broadcast your image and audio - if it has a built in mic.
In order to see another person on Skype they have to have a webcam installed as well.
Before you can use your webcam in any chat program you have to configure it to that program

Test your webcam here to make sure it broadcasts ok - Hit 'Allow' in the top window and check your cam in the left hand panel.

http://www.testmycam.com/

working OK ?

CONFIGURE TO SKYPE
Connect webcam
Its good practice to disconnect and re-connect your webcam before you start (To reboot the webcam software) - if you have been using it elsewhere the SKYPE software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Start Skype.
On the 'Tools' menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Run down the list setting your defaults
Select your webcam as the default microphone.
Make a free test call
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
This will launch your webcam
Adjust quality of picture in 'Settings'
Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

Mar 23, 2010 | Logitech Quickcam Chat Webcam

1 Answer

How to use web caM


be sure you plug-in in your webcam to the usb port of your computer and install the software and driver properly. when chating. if you are using a yahoo, camfrog, msn messenger. you just fing the option that can activate your webcam when you are chating. in yahoo messenger you can find their in the option and then view my webcam and now you can see your viewing your cam. be sure you log in first to yahoo messenger. if you want to taking picture with you're web cam just go to the my computer and find you camera D-link DSB-300 and just double click to open it your cam.

Mar 18, 2010 | D-Link DSB-C300 Webcam

1 Answer

How to set the web cam on chating via skype


Normally you can do video call.
While chatting and enable the video is possible with the latest version of skype 4.1.0.179

Another options also is to use is use a other software for video like msn or yahoo messenger.

First I would recommend you to download the latest version of skype
Follow the link :(www.skype.com/download/)
While configuring be sure to use the following setting:
1.Start skype.
2.In the navigation pane of the Skype Options window, click Video Settings.
3.Adjust quality of picture in 'Settings
4.Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
If you need further help you can log onto:
(http://support.skype.com)
ok

Jan 02, 2010 | Logitech Quickcam Chat Webcam

2 Answers

My Logitech C200 webcam video freezes 20 seconds into a call


Go to Start->Control Panel->System->Hardware->Device Manager. Here locate your webcam, select it and delete it. Now disconnect the webcam from the laptop. Reboot. Insert the Logitech CD and install the drivers afresh. Reboot. Connect the webcam and allow Windows to detect it and load its drivers. Windows will take a long time to do this. Now configure the Instant manager to use this webcam as default camera. And start using. But before you do that start the webcam program to use this camera to check if it takes the video continuously. I do not see any problems now. Trick with Logitech is to load drivers with the device disconnected.

Nov 20, 2009 | Logitech Webcam

1 Answer

LifeCam Webcam video picture problem


HI

TRY WITH REINSLLATION OF THE WEBCAM DRIVER AND CHECK WITH OTHER INSTANT MESSENGER

WITH REGARDS

Apr 18, 2009 | Microsoft LifeCam VX-3000 Web Camera

1 Answer

PROBLEM WITH VIDEO CONNECTION


Normal 0 See section C. Windows Live Messenger in the info below to setup the Audio & Video.
Also send this to your family and friends so they have their computer setup properly.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:
  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://ca.messenger.yahoo.com/download/ ) set it up as follows:
  1. Click on Messenger at the top left and then go down to Preferences and then the Preference Window will come up.
  2. Next click on Calling and Devices. In the Calling & Devices on the right and set the Microphone and Speakers to the computer Audio Card or sound device installed in the computer.
  3. Just below that, go to the Test Audio section and (in blue writing) click on Open the call setup assistant” and follow the instructions on the left window.
  4. Then after completing the Audio Setup, go to down and click on Webcam it should BRODCSAST and you will see your picture.
  5. To Chat, click on MESSENGER and then
  6. After make necessary settings, click on APPLY, then OK.
  7. Then click on MESSENGER and go to my WEBCAM ready to use.
  1. Windows Live Messenger:
http://www.microsoft.com/downloads/details.aspx?familyid=d78f2ff1-79ea-4066-8ba0-ddbed94864fc&displaylang=en
  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Mar 21, 2009 | Microsoft LifeCam NX-3000 Personal Web...

1 Answer

Complete dark screen on quick cam


Try unplugging the USB cable and replugging it while the computer is on. I had the same problem you describe and also did a soft reboot of the computer which did not fix it. Cycling the power of the camera by unplugging it and plugging it back in fixed the picture.

Aug 03, 2008 | Logitech QuickCam Chat Personal Web Camera

1 Answer

My webcam is not working


hi.dear.u let me know wich one operting system u r using and normal u r web cam working r not

Jul 25, 2008 | Computers & Internet

2 Answers

Sound problems


You must go into the Tools Option where you sign in on MSN Messenger and change the microphone/speaker settings there. It is at the top of the window where you can see your status and all your contacts listed...the window that comes up upon "Sign In".

These override any settings you may have changed in the control panel.

Yes...it works with Windows Vista.

Nov 22, 2007 | Logitech QuickCam Communicate STX Personal...

Not finding what you are looking for?
Logitech Quickcam Chat Webcam Logo

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2635 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18331 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...