Question about Pioneer CDJ-1000 CD Player

1 Answer

Tracks start stopping.Cue button playing up.Code E8302 showing

Both my cdj1000mk3 are playing up at the same time.There only 5 months old and have not used them a great deal.Cue button wont find cue points properly and tracks seem to stop and start without me touching a thing.When I have no music playing out of the speakers and just listen to them they make a very quiet click click noise.Both are doing the same thing,and a code on both comes up E8302.Is this something to do with the downloads or is there a problem with the laser not reading the disc properly.Very frustrating they are pretty much brand new.

Posted by on

  • tray363 Jan 03, 2009

    I'm having the exact same problem as Valmadre. Mine will play my older burned cds & most orginal disc usually no problem. I can play all my cds on my other one. I went out & got Serato to fix the problem but it wont even read the Serato disc.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 68 Answers

Hi,

It good be a number of things that can cause this, it could be the quality of your cdr's that your using, it could be your disc copier going faulty, it could be your recording software your using, it could be your disc's are slightly damaged, it could be the speed your your copying your cdr's or it could be your laser pick-up going faulty. If you havent had your player repaired you can send it to us to have a look at it for you.

Regards.
Paul.

http://www.audiovisualservices.info/

Posted on Jan 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Kenwood music system (quite old ) cd player DP-322 after you load the disc it sometimes just plays 1 track or doesn't play at all if you open the draw and then close it and select random play it...


you need to have the lazer lense cleaned by a pro or buy a lens cleaning cd and load it about 5 times i think youl find it will fix your problem

cheers

sonic boom electronics australia.

Apr 21, 2010 | CD Players

1 Answer

When i press my cue button it skips tracks ometimes??


Hi Mate

I had the same problem and just replaced the cue button on the psb and it works fine, you get them off ebay for £5

Dec 16, 2009 | Pioneer CDJ-1000 CD Player

1 Answer

New CDJ1000 MK3 freezing and then turning itself off


CDJ 1000 mk 3 freezing while playing tracks and sometimes freezes when a cd is inserted. The orange cue light comes on but the green play doesnt. Any ideas?

Thanks

Sep 25, 2009 | Pioneer CDJ-1000 CD Player

1 Answer

Cdj 1000-mk-2


Could be either the Track skip switch has collapsed and is thus over sensative or the button bank is broken and the track skip switch is being pressed when the cue button is used.
Could also have liquid spillage on the circuit board which cause all sorts of random problems

Oct 21, 2008 | Pioneer CDJ-1000 CD Player

3 Answers

ON MY PIONEER CDJ-1000MK2 MY CUE BUTTON IS VERY SENSITIVE... I DON'T KNOW HOW TO FIX THIS, I KNOW EBAY SELLS THE PART HOWEVER IM NOT SURE HOW TO REPAIR IT MYSELF AND OPEN UP THE CDJ.


Replace the cue tac switch or worst scenario replace the cue play board.... takes 5 mins to open solder and fit back together or 2 minutes to replace board

Hope this answers your query
MBI
01273 607384

Jul 14, 2008 | Pioneer CDJ-1000MKII CD Player

1 Answer

PROBLEM WITH MY GEMINI CDJ 02


Hi there,

just read about your issue with the gemini's 02, have had the same ones since december 06, and have had the same problems as you, mainly my 'play' buttons that broke down into the machine.

The first time I had it repaird by the shop I bought them at, after that had several times where the paly button broke into the machine. What I do now is to open the player by unscrewing the screws and it 'tape' the button where it should be.

The tricky thing is that when opening the player, there's like a sound card on top of the buttons, so you need to get that tape in between the card and the button, I learned to do this with a tweaser;

Having said that, I will also tell you that I've had it with this gemini hassle and that I will move to pioneer soon;

Good luck!
O.

Mar 05, 2008 | Gemini CD Players

2 Answers

Axis 9


i have exactly the same problem, its annoying

1 thing which works is holding the button down then spinning the deck round, let go, turn off the scratch button, press play and turn on the scratch button again

Jan 15, 2008 | Nu Mark AXIS 9

1 Answer

Cdj-500ll cue button repair


the faulty button will not stop it from playing well... replacing them is not hard so long as you have some experience with a soldering iron.
Clean the laser lens with a cotton bud wet with windex... then use a dry one to be sure no residue is left. If it still mistracks... new optics required!. You willl need a pioneer service agent to do this for you. A little complex for the first timer :)

Jan 08, 2008 | Pioneer CDJ-500II CD Player

1 Answer

NAD 5000 CD player


I FIX MY NAD 5000 CLEANING THE LASER LENS USING COMPRESS AIR

Nov 06, 2007 | CD Players

Not finding what you are looking for?
Pioneer CDJ-1000 CD Player Logo

651 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer CD Players Experts

T-Comtech Repairs
T-Comtech Repairs

Level 2 Expert

411 Answers

Ben Armstrong

Level 2 Expert

332 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Pioneer CD Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...