Question about Epson Stylus NX400 InkJet Printer

1 Answer

I am trying to put new ink cartridges ito the epson stylus ns400 series epson ink jet printer. how do I do that?

Posted by on

  • rasszz Feb 08, 2009

    i am trying to install ink cartridges into a new NX400 but the cartride holder doesn't move to the left enableing me to load the ink?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 78 Answers

Hold the ink button down for 3 seconds, the carriage unit will move out to allow you to change the cartridge

Gremlin11

Posted on Dec 13, 2008

  • gremlin11
    gremlin11 Dec 13, 2008

    Sorry, wrong product, thaught it was a stylus 400.



    The NX400 is not available in Australia, But I will look it up and let you know shortly



    Gremlin11

  • gremlin11
    gremlin11 Dec 13, 2008

    Ok, the equal in Australia is the TX400, You should be able to scroll through the menu to the ink. Alternatively, you should be able to tell the unit that you want to change your ink through the preferences. Your status monitor in the start menu on your screen will lead you into changing your cartridges. Have a dig around that and see how you go.



    Gremlin11

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Epson Stylus Photo R220 Ink Jet Printer won't print with new ink cartridges


Silly question: Did you remove the plastic tape from the bottom of the cartridges when you installed them?

Apr 30, 2012 | Epson Stylus Photo R220 InkJet Printer

1 Answer

Put new ink cartridge in Epson NX 110


I have a epson stylus NX110 Printer the ink cartridges will not stop so that i can put in new ones.I press the stop button but the ink cartridges will not stop onthe arrow so that i can put in all new ones.

Apr 21, 2010 | Epson Stylus NX115 All-In-One InkJet...

1 Answer

I have a new Epson Stylus NX300 Series. When I


Diane,
We try to steer people away from new Epson printers unless they plan on purchasing a professional model. The new Epson cartirdges have little ink and finicky. I would try power cycling the machine with the cartridges removed (unplug it for 30sec.) then reinstall the cartridges. If the problem persist call Epson and let them know what you think. If they don't help you, buy an HP. But but an HP that takes integrated print head cartridges or you'll be in the same situation.

Pat.

Feb 02, 2010 | Epson Stylus NX300 All-In-One InkJet...

2 Answers

How do you change the black cartridge in the printer epson stylus nx115


Here is the Link showing instructions below. If you find this helpful, pls rate me.

http://files.support.epson.com/htmldocs/nx110_/nx110_ug/wwhelp/wwhimpl/js/html/wwhelp.htm

Replace Ink Cartridges
Your Epson Stylus NX110 Series and its software will let you know when an ink cartridge is low or expended.
If ink is low, the ink light flashes. You can continue printing until a cartridge needs replacement.
If a cartridge is expended, the ink light stays on. You must replace the cartridge to be able to print.

Warning:
Keep ink cartridges out of the reach of children and do not drink the ink.
Note:
If you need to change a cartridge before it or any other cartridges are low or expended, run the Ink Cartridge Replacement utility.

You cannot print or copy when an ink cartridge is expended even if the other cartridges are not expended. Replace any expended cartridges before printing or copying.

Leave your old cartridges in the Epson Stylus NX110 Series until you are ready to
replace them to prevent the print head nozzles from drying out.
When an installed ink cartridge is more than six months old, you may need to replace it if your printouts do not look their best, even after cleaning and aligning the print head.
Follow the instructions in these sections to check and replace your ink cartridges:
Check Cartridge Status
Purchase Epson Cartridges
Replace Cartridges Using a Printer Software Utility
Remove and Install Cartridges

pls rate me. Thanks and Good Luck...

Jan 23, 2010 | Epson Stylus NX115 All-In-One InkJet...

1 Answer

It won't print after installation of new ink jet


Here's a link to the Epson printer troubleshooting guide...if this helps; please indicate so.

http://er.epson.com:8001/start

Nov 10, 2009 | Epson Stylus Photo RX620 All-In-One InkJet...

1 Answer

Epson Stylus Photo R800 driver ran out of ink weeks ago. Today new ink cartridges arrived. Replaced all cartridges (even the ones that were ok) because the printer's low ink light would not go out until I...


His could be because epson print jets plug up. and usualy cost more to repair than to purchase new printer. i had epson and now buy HP because hp when you replace the ink cartridge the spray jets are incorporated into the cartridge the only thing you have to be carefull of is that somel manufactures now put a chip on the cartridges to expire the units so they can sell you another even if you dont use the ink HP included so look for exp. date on new units. look into food warehouses like sams. costco, Bjs etc. they usualy have good prices on printers. sunday paper is also a good place to look.

Sep 22, 2009 | Epson Stylus Photo R800 InkJet Printer

1 Answer

Epson DX8450 Stylus not recognising Jet Tec inks


Buy a Universal Resetter for Epson Intelligent Ink Carts and follow the instructions. They work like a dream! Freely available from most third party cartridge dealers and eBay.

Apr 16, 2009 | Epson Stylus C86 InkJet Printer

2 Answers

I've got the Epson Stylus DX 8400 printer. when I put the cartridge,this message come up: "ink cartridges cannot be recognized." txs


I had the same problem too.  I went to the Epson website and they gave instructions to shake the cartridge 4-5 times prior to installing.   It worked!!!  I tried alot of things before I saw that I needed to shake the cartridge.  Definitely give this a try if you haven't already.

Dec 27, 2008 | Epson Stylus CX4800 All-In-One InkJet...

1 Answer

Epson Stylus Printer CX4600


Hi,

I don't know if this will work on an Epson, but it does on Cannon. The pads on the cartridges or the ink jets in the printer head may be cloged with dry ink. Get some Q-tips and rubbing alcohol (water is a poor substitute). Take out the ink cartridges and touch the pad on the bottom with a Q-tip (one for each color). If there is color the cartridge pad is OK. Take a fresh Q-tip dip it in rubbing alcohol and GENTLY rub the little holes on the bottom of the plastic box the cartridges go in. Thse are the print head jets. You should see color. You may need to clean it a couple of times if the ink has dried down into the jets. It is OK to have the Q-tip pretty wet, but not dripping.

Hope this helps

Dec 03, 2007 | Epson Stylus CX4600 All-In-One InkJet...

1 Answer

Changing black & colour ink cartridge


My guess is that it will be the non gen carts they cause heaps of trouble, beleive me. Hard to tell you for sure but the first thing I would do if you brought it in for repair would be to put in manufactures cartridges.

Dec 01, 2007 | Epson Stylus CX3200 All-In-One InkJet...

Not finding what you are looking for?
Epson Stylus NX400 InkJet Printer Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...