Question about Gateway (4000274) Motherboard
The minute i start typing the ist letter of my password the cursor freezes restarting the comp repairs it but freezes again assoon as a key is touched
Try reinstalling your operating system, but first try your mouse or keyboard both of them to other computer, if those 2 are ok then try reinstalling you operating system, that should the trick.. thank you and we hope to serve you again please let us know if this works out thank you and God bless..
Posted on Dec 13, 2008
Tips for a great answer:
To run the check disk utility you will need a repair disc or
a operating system disc. Put the disc in the cd drive and boot from
it. You want to get to the Dos Command Prompt (Black screen with white
letters) and type the following command: chkdsk /r
Check disk will run well over an hour or two and you will notice the percentages going from high to low, this is normal. Let it run to completion. Then reboot machine.
If check disk fails to solve your problem you might have to reinstall windows. Try doing a Repair Install that way you don't loose your data, documents, music, pictures, videos or programs.
In windows xp you get to the dos command prompt by selecting R for repair when the options appear.
In Vista and Windows 7 you want to get to the recovery console and look down at the bottom of the window for the Dos Command.
May 12, 2012 | Foxconn A74ML-K Motherboard AMD Socket...
do you have the set up installation disk
Restart your computer with the Operating system Setup disk in the CDROM drive.
If you are prompted to press a key to start the computer from CDROM, do so quickly. Otherwise it may try to boot from the hard drive.
After a few minutes, you'll see a prompt to press the R key to start the Recovery Console. When Recovery Console starts, it will prompt you to enter a number corresponding to the Windows XP installation that you need to repair. In most cases, you'll enter "1" (which will be the only choice). If you press ENTER without typing a number, Recovery Console will quit and restart your computer.
Enter your Administrator password. If you don't enter the correct password, you cannot continue. At the Recovery Console command prompt, type fixmbr and then verify that you want to proceed. Your damaged MBR will be replaced with a shiny new one, and you should then be able to boot your system normally. In some cases, you may need to repair the boot sector in addition to the MBR. If your system still doesn't boot properly, repeat the steps above, but issue the fixboot command instead.
Hope this helps
Oct 02, 2011 | Intel Desktop Board D845GLVA...
Mar 15, 2011 | Motherboards
Feb 09, 2010 | HP Pavilion dv9500 dv9600 and dv9700 FF...
Mar 07, 2009 | Dell Motherboard Dimension 4100 Intel 815...
Jan 26, 2009 | ASUS Motherboard P5n-mx
Jan 22, 2009 | Gateway (4000782) Motherboard
Sep 29, 2008 | Gateway (4000274) Motherboard
104 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: