Question about Hitachi 43UWX10B 43" Rear Projection Television

1 Answer

Hitachi tv How do you get the bulbs to line up. The red is about four to five inches off to the right of the vertical cross hair. We moved it as far left as it will go but will not move no more to the left. How do we get it to line up. We found how to to adjust it horizonally but can not get it to fully ajust vertical could you please email me back at and tell me what you think we can do. cause service man wants to much just to come look at it. mary

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 398 Answers
Re: Hitachi tv

One of your convergence IC's has burned out and needs to be replaced. A good rule here is to go ahead and replace both STK392-110 IC's with the new improved STK392-150's. If you have never replaced convergence IC's and realigned convergence circuits, allow a qualified tech to handle it for you. When I do a housecall for a set like that I charge $150 but shops in your area will vary so ask around.

Posted on Aug 14, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Blueish hue throughout picture, like a blue ghost a couple of inches to the right of objects on the screen

Your TV's Convergence may be out of line. To adjust this do the following.

1) Press the Menu button on your TV/Remote
2) Scroll through and select the "Advanced Features" Menu.
3) Select Blue Convergence
4) Use the V keys on your remote till the cross hairs are all lined up in the middle of the screen and the center one is white.
4a) You can use the "Video" button to switch between the red & blue cross hairs.

Dec 28, 2010 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

Red/Orange horizontal lines

it could be that the tv convergence circuit is going bad. One shure way of finding out is to go to the tv feature menu(picture,audio etc.) and select the customer convergence setting, you should get a cross hair pattern(cross in middle of screen). that cross should be white and by aligning the red or blue colors they should move left, right, up or down

Jul 27, 2009 | Akai PT5492S 54" Rear Projection...

1 Answer

Phillips 55 inch rear projection tv red convergence screwed up

Install the DPTV305_DPTV345 Chassis convergence repair kit. You can get the kit at the following link and it contains the parts plus instructions on CD.

Jul 25, 2009 | Philips 60PP9202 60" Rear Projection...

1 Answer

Convergence line will not move to match cross hairs

the green line will not move. it is stationery and red and blue have to adjusted to it

Jul 20, 2009 | Panasonic PT-51HX42 51" Rear Projection...

1 Answer

Unable to align red crosshairs in horizontal range

No there are no quick fix options for this fault. The convergence amplifiers operate similar to a high power audio amplifier, so if there is an impairment anywhere in the system, it will result in distorted audio, or in the case of television convergence amplifiers, one or more colors won't align. The convergence power pacs need to be replaced and the out of tolerance precision resistors located near the power pacs need to be carefully checked and replaced as necessary. And the power supply fuse links to the power pacs checked and replaced as needed.

It is also possible that there are root faults that cause the amplifiers to go bad which include bad connections or a bad digital control module. This repair is possible for anyone having basic electronics knowledge and soldering skills. After the above repairs are performed it may be necessary to perform the static convergence realignment procedure using the outer cross hairs as you mentioned, and realigning them.

Apr 23, 2009 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

Hitachi 50UX19K

in the tv menu or on the front of the tv there is an adjustment to align the color guns ( there are three, red blue and green). it will come up as a black screen with a color cross in the center. while this may clear up your problem the cross doesn't always clear it up completely. if the set is really old you might consider a new one.

Apr 22, 2008 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

Red bow on top and bottom of 61dx01b

Convergence amp ic bad
Or send to

good luck
please mark the post with a fixya

Feb 20, 2008 | Hitachi 61SDX01B 61" Rear Projection...

1 Answer


you have bad convergence ics

Apr 13, 2007 | Toshiba TP61H60 61" Rear Projection...

2 Answers

Hitachi tv color will not line up

Convergence repairs run 300-400. Electronic parts called IC's

will need replacement.Skill level moderate to high needed.

Part # Stk 392-110  X 2

Mar 10, 2007 | Hitachi 43UWX10B 43" Rear Projection...

Not finding what you are looking for?
Hitachi 43UWX10B 43" Rear Projection Television Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hitachi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides