I have just bought a Belkin N1 Router but I am unable to connect to the internet. I have wireless internet through cirrus communications however I am still unable to contact to the internet even when I select static IP.
Can anyone help before I take this stupid thing back???
Many thanks
Donna
SOURCE: Belkin N1 Router connection drops when phone rings
You may have a phone line connected from the modem to a wall outlet. Count the number of cables coming out of your modem - you should have only three: the power cable (connects to the wall), Cat 5 (also connects to the wall), and ethernet (running from the modem to the router).
SOURCE: Nortel IPSEC VPN unable to connect via a Belkin N1 Wireless Router
Belkin says IPSec pass thru works now. I'll know tomorrow.
http://www.belkin.com/contact/milan/default1.aspx?id=580959590B0A5E0C0B5A59575B595F0A305F5D
F5D8231-4 WW v4.00.18
http://www.belkin.com/contact/milan/filedownload.aspx?id=580959590B0A5E0C0B5A59575B595F0A305F5D&file=0
SOURCE: Belkin N1 Vision
DHCP Host name is what your looking for.
you need to name each item ie. psp as psp and ps3 as ps3 when you setup each item for connection. so when you setup or edit the settings for your ps3 on your ps3 you need to look for DHCP Host name and name it ps3. etc
do the same for all.
SOURCE: Can I use my belkin N1 Vision as a bridge?
It can't be used as a bridge but you can use it as an Access Point. All you need to do is disable the DHCP server of the router and don't use the Internet/WAN port
SOURCE: F5D8233-4v3 - Belkin Wireless Router
You must configure the wireless settings of the laptop manually. It should match the wireless settings of your router. If you have wireless encryption enabled, make sure to type the network key on the wireless settings of your laptop.
107 views
Usually answered in minutes!
My problem is similar. I also have wireless through my carrier, but the installation CD will not install
×