- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Did you remove the USB cable? As long as there is an USB cable in the camera, you can't power it up.
Then you still have to check if the battery is still in good order. Batteries do have a limited time of life. And you only can be sure it is charged, when it works in another (same model) camera.
Try to disconnect the camera from the computer, then connect it to a different USB port if your computer is a desktop connect the camera to the back USB port then restart the computer and check it again.
Please discard that the USB port or the USB cable are defective. You can do it if you try to hook your camera in other personal computer using the same USB cable. If it works, then follow the next instructions.
Connect your camera to the PC thru the USB cable and turn it on.
If you are using Windows, go to the Control panel - System - Hardware - Devices - and check if there is any device that was not recognized by Windows. Such devices are marked with a yellow question mark.
If so, get into the device item and with right mouse click, select to update the device driver.
If there was not unrecognized device, then you can unistall your USB port driver and then run a change hardware status to recognize the USB port again, then run the update driver routine.
The rebel comes with a mini-USB adapter cable. Just plug it into your PC and the camera, and the PC should see it as a USB drive. Then copy or move the images as you would any other files. If you do not have the cable, they are available at Best Buy.