Question about Bosch Axxis WFL 2060 Front Load Washer

2 Answers

Flashing Active Light and not taking fabric conditioner

Hello, We have had our Bosch for 6 years. Problem 1: After our last house move the machine developed a fault where halfway through a wash cycle, the wash cycle stops and the 'active' light flashes. You have to press 'start' to get the machine to continue its cycle. Problem 2: Recently, the machine stopped taking the fabric conditioner from the detergent drawer. I have cleaned the jet nozzels in the top of the drawer housing, but the conditioner is still in the drawer at the end of the wash. Any help with either of these problems would be greatly appreciated. Cheers, Mr and Mrs M

Posted by on

  • shop258 Jan 07, 2009

    My Bosch is also 6 years old. About halfway through the cycle it stops and the light flashes. It has to be restarted a number of times. Recently the detergent drawer has started to overflow and flood.

  • Anonymous Mar 26, 2014

    Miele w 3740 conditioner not stopping in drawer

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 116 Answers

1: The flashing wash light usually indicates a problem with the door latch while a flashing rinse/spin light usually indicates a problem with your inlet valve. 2: The cold water inlet has 2 independant outlets. The issue that you are describing indicates that one part of the cold water inlet is not opening to allow water to flow to the proper dispenser port.

Posted on Mar 11, 2007

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Bosch Master
  • 744 Answers

Axxis WFL 2060 Front Load Washer This video will show you how to keep your soap draw clear and how to service the parts
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

Posted on Jul 30, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Excell 7 VarioPerfect: fabric conditioner compartment will not drain


perhaps you need to contact Bosch website for tech support

Sep 21, 2016 | Bosch Washing Machines

2 Answers

Why is the fabric conditioner not draining from the draw?


Bosch Washing Machines fabric conditioner not draining from the draw, This video will show you how to keep your
soap draw clear and how to service the parts

Please remember to subscribe to our YouTube channel for all appliance tutorials

a 4 THUMBS rating is appreciated for answering your FREE question..

Jun 21, 2011 | Bosch Washing Machines

1 Answer

I have had my amana air conditioner for16 years as of last year it started to take a long long time to cool the room, i live in a older house and i noticed it has a lot of dust where the vents are. How can...


Hello,
To clean the vents around your room, just use a vacuum with a brush/hose attachment. If you do not have that available then use a light cleansing agent (mild soap and water) with a rag and scrub the surrounding areas you want to clean. Hope this helps! James

Apr 05, 2011 | Amana Heating & Cooling

1 Answer

My bosch excel 1200 washing machine is not taking the fabric conditioner away from the drawer and it not being used in the wash despite cleaning the draw out. why?


bosch excel 1200 washing machine is not taking the fabric conditioner away from the drawer This video will show you how to keep your soap draw clear and how to service the parts
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook

Feb 20, 2011 | Bosch Washing Machines

1 Answer

Flashing container light. what is this? Dryer


Try taking out the lint screen and scrubbing it well in the sink with hot water and a brush. If you havent cleaned out below the lint screen, get a vacuum and a crevice tool and remove any standing lint as well as cleaning the vent. Bosch lint screens clog easily especially if you are a big fabric softener user.

Nov 20, 2010 | Bosch Classixx WVF 2402 Front Load...

2 Answers

Conditioner is staying in draw when water should be feeding into draw at end of cycle it is going into both other draws but not the conditiner one any ideas


Hi, welcome to Fixya. Immediately what comes to mind, actually two things. Fabric softner can often be too thick to dispense properly in front load dispenser's unless deluted half & half with water before adding. The other thing is this, it could be the water inlet hoses connected backwards, i.e. Hot going to cold and cold to hot at the washer, hence in the rinse cycle when cold water should enter the fabric softner chamber it doean't. Let me know what you find as I will look for your reply. Thanks for visitng "fixya". Please take a moment and rate this info accordingly but also let me know if you need further assistance. Good luck. Macmarkus :)

Jun 22, 2010 | Bosch Classixx WFL 2066 Front Load Washer

2 Answers

Machine won't draw out fabric conditioner from dispenser


Hello,
I dont know what model you have but you are correct in your assumption that the conditioner is siphoned out on the last rinse unless it is different for your model.Most machines I am familiar with operate in the first instance.Check that you have good water pressure to all compartments also get a toothbrush and clean the holes above the drawer even a bent piece of wire to unblock the small holes.

Good luck

Apr 12, 2010 | Washing Machines

2 Answers

BOSCH 1200 FRONT LOADING WASHING MACHINE


BOSCH 1200 FRONT LOADING WASHING MACHINE.This video will show you how to keep your soap draw clear and how to service the parts
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

Jan 20, 2010 | Bosch Washing Machines

1 Answer

Which comaprtment for the washing liquid ?


Hi,

Compartment 1 is for Pre Wash
Compartment 2 is for Main Wash
Compartment marked with what looks like a star is for conditioner.

Bosch manuals can be downloaded from www.bosch-home.co.uk

May 19, 2009 | Bosch Dryers

3 Answers

Bosch max wfl2000 washing machine


Just been through this with our Bosch Maxx, problem was the pump discharge pipe was blocked with soap deposits. I also removed the large black rubber pipe from the drum/pump and cleaned this out as well.
All working fine now.
SteveN

Sep 08, 2007 | Washing Machines

Not finding what you are looking for?
Bosch Axxis WFL 2060 Front Load Washer Logo

664 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3074 Answers

Marvin
Marvin

Level 3 Expert

81285 Answers

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...