Question about Evenflo Jenny Lind Crib

2 Answers

Need instruction manual for Evenflo crib model # 9021

I was given the crib evenflo model # 9021, but I am unable to get the front rail to stay up on the crib. Please let me know if you can help me, I am not sure that I have all of the parts but if I could see the instruction manual I would be able to tell. Thank you to anyone that can help. Dusti

Posted by on

  • Anonymous Mar 18, 2009

    We were given a crib by a family friend who purchased it 3 years back. My husband put the entire crib together, but the front panel that is supposed to slid up and down does not have the pieces to connect the bottom slider. We have no instruction manual to even guess what these pieces look like and site such as Babies R Us and EvenFlo's site are unhelpful. We do not even know the model number, etc, and are guessing the label says Evenflo. Our baby is due in 10 weeks. Any help would be greatly appreciated: SheilaMGolden@hotmail.com

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have the paperwork/instructions that came with our crib...model 9021. If you still need it email me at beaglebabe05@gmail.com and I'll scan it for you.

Posted on Mar 01, 2009

  • beaglebabe05
    beaglebabe05 Mar 21, 2009

    Because I was getting so many emails asking for the instructions I have uploaded them to tinypic and link them here. These assembly instructions are for Evenflo crib model 9021 manufactured in 1999. When you click on the link, click on the image, select "view raw image" and you will be able to use magnifier to zoom in.



    (front and back) http://tinypic.com/view.php?pic=2ufeg7o&...

    (pg 1&2) http://tinypic.com/view.php?pic=315cyeq&...

    (pg 3&4) http://tinypic.com/view.php?pic=33578ma&...

    (pg 5&6) http://tinypic.com/view.php?pic=2cy3709&...



    If your model is different do not use my instructions, improperly assembling a crib can put your baby's safety at risk. I recommend contacting Evenflo/Delta/Jenny Lind (whichever your brand is) via the "Support" section or "Contact Us" section of their website, make sure there have been no recalls for your brand and model, and asking for assembly instructions for your particular model.

×

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 5 Answers

HERE IS THE LINK AFTER SEARCHING ALL NIGHT AND WE OWE IT TO THE MAN WHO GAVE US THESE DIRECTIONS: http://www.fixya.com/support/t1370990-need_instruction_manual_evenflo_crib

Posted on Sep 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We need a screw and insert nut(?) for a crib, Gerry model 9021


Hello,

Every piece of equipment has a model number you can check this link https://plweb.evenflo.com/replacement_parts.aspx You should be able to get replacements. You can also call them they would be happy to find a replacement for you. These things get lost from time to time or just get worn and torn. Here is a number for you to call.


US: 1-800-233-5921
Canada: 1-937-773-3971

Hours of Operation
Monday - Friday
8:00 a.m. – 5:00 p.m.
Eastern Standard Time

May 02, 2010 | Evenflo Jenny Lind Crib

1 Answer

I am of need of the dropside rails that go into the drop down side rail in order to put my crib back together. It's a evenflo 014614 manufactured on 01/29/04. Do you know where I can find these?


Start with www.evenflo.com
If they don't have it,you could try places such as www.productsamerica.com
New/used shops sometimes have cribs that have seen better days,but some of the parts are still good.
Hope this helps.

Sep 23, 2009 | Evenflo Jenny Lind Crib

3 Answers

I need some parts for Gerry Crib model no. 9021. Where can I get those?


HERE IS A INSTRUCTIONS AND PARTS HOPE IT HELPS

These assembly instructions are for Evenflo crib model 9021 manufactured in 1999. When you click on the link, click on the image, select "view raw image" and you will be able to use magnifier to zoom in.

(front and back) http://tinypic.com/view.php?pic=2ufeg7o&s=5
(pg 1&2) http://tinypic.com/view.php?pic=315cyeq&s=5
(pg 3&4) http://tinypic.com/view.php?pic=33578ma&s=5
(pg 5&6) http://tinypic.com/view.php?pic=2cy3709&s=5

May 18, 2009 | Evenflo Jenny Lind Crib

3 Answers

I need screws for the Gerry 9021


SEE IF THIS HELPS GOOD LUCK: These assembly instructions are for Evenflo crib model 9021 manufactured in 1999. When you click on the link, click on the image, select "view raw image" and you will be able to use magnifier to zoom in.

(front and back) http://tinypic.com/view.php?pic=2ufeg7o&s=5
(pg 1&2) http://tinypic.com/view.php?pic=315cyeq&s=5
(pg 3&4) http://tinypic.com/view.php?pic=33578ma&s=5
(pg 5&6) http://tinypic.com/view.php?pic=2cy3709&s=5

Feb 13, 2009 | Evenflo Jenny Lind Crib

3 Answers

Need assembly instructions for baby bed model #012614


I need instructions to asseble jenny lind crib #012614

Sep 05, 2008 | Evenflo Jenny Lind Crib

1 Answer

Side rail


honest answer: take super heavy duty zip ties and tie the drop side in place in like 8 places to be sure it will stay put.

i did it with my crib to be safe when simplicity recalled theirs for rail issues, i would start with trying to get a hold of a person st simplicity for children your crib may be one of the ones recalled for rail failure issues then they would send you parts free

they should also be able to help you find out if the crib is theirs or not too

you should under the crib for a sticker with numbers, usually the model number / serial number and date of manufacture if you come up with a model number type it into a search engine online if manufacture name not on that label to find out who makes it, then contact them for pieces

hope that helped

Aug 05, 2008 | Evenflo Jenny Lind Crib

2 Answers

We need assembley instructions, or schematics


HOPE THIS HELP YOU OUT GOOD LUCK These assembly instructions are for Evenflo crib model 9021 manufactured in 1999. When you click on the link, click on the image, select "view raw image" and you will be able to use magnifier to zoom in.

(front and back) http://tinypic.com/view.php?pic=2ufeg7o&s=5
(pg 1&2) http://tinypic.com/view.php?pic=315cyeq&s=5
(pg 3&4) http://tinypic.com/view.php?pic=33578ma&s=5
(pg 5&6) http://tinypic.com/view.php?pic=2cy3709&s=5

Jan 01, 2008 | Bassett Mission Crib

Not finding what you are looking for?
Evenflo Jenny Lind Crib Logo

3,146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Evenflo Cribs, Cradles & Bassinets Experts

Stitch85

Level 1 Expert

22 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Tom Chichester

Level 3 Expert

24604 Answers

Are you an Evenflo Crib, Cradle and Bassinet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...