Question about Logitech PC Cordless Rumblepad 2 Controller (6992752)

Open Question

Gears of War - Rumblepad 2 mapping

Hi thrive,

I have followed your instructions and downloaded the Joytokey software. I have mapped all the buttons so the keyboard emulates my cordless rumblepad 2. However, I don't understand how to stop the joypad mapping to the xbox 360 configuration.

When I delete or change the file name WarInput.cfg, it recreates it everytime I start the game. So now my joypad buttons have two commands each - the xbox 360 and my mapping commands.

Please help me if you can :(


Jem

Posted by on

6 Suggested Answers

Mortaza
  • 30 Answers

SOURCE: Logitech wingman cordless rumblepad

Just install the drivers and software which followed with the product. You can download the software from aswell: http://www.logitech.com/pub/techsupport/joystick/lgs460enu.exe Further instructions should be on the CD.

Posted on Jul 01, 2007

  • 14 Answers

SOURCE: getting the logitech rumblepad to work with Valve Games (Portals)

Hey just Download LGS501.exe .(Search for it in Google) and install it.This is Mainly For Win Vista(Even though it will Work 100% on XP) .

If You have any Questions . Or If you Want any Drivers , Softwares,Games,Help,Firmware,Patches,Serial Numbers JUST Email to my account ------ arjunmanoj23@hotmail.com

With Your Problem Or The Thing You Need.I Will Send it As Fast as Possible as a Reply to your email account which you sent to me .

Posted on Dec 15, 2007

  • 1 Answer

SOURCE: Gears of war problem

Finally, I got it.

I couldn't figure out why my Logitech Profiler wouldn't work with this game. But Finally I figured it out. I was pointing it to the wrong executable.

The shortcut points to a exe called Startup.exe. So you would think to point to that. Leave it to MS to obfuscate a simple exe.

The executable to configure in your Logitech Profiler is: WarGame-G4WLive.exe
(but don't try starting the game through profiler. It won't work. You have to start it through the shortcut and setup.exe.)

Full path below...

C:\Program Files\Microsoft Games\Gears of War\Binaries\WarGame-G4WLive.exe

Now that I did that, I can configure the pad any way I want and it works!

Posted on Dec 15, 2007

  • 1 Answer

SOURCE: Gears of War for Vista and Logitech Rumblepad 2 directional issues (fwd/rev)....

There is a way to fix it: go into your control panel under Game controllers, select your logitech cordless rumblepad 2 and hit

properties -> settings -> Enable Swap Mode -> close -> ok

Now start Gears of War and go into the options menu under controls for the controller.

Invert Axis = yes
Joystick Mode = Left-handed

This fixes the problem with the joysticks, but there is still a button fix that needs to happen. operations for buttons 2&3 are swapped, same thing with buttons 1&4, 5&7 and 6&8. I don't how to fix this problem yet.

Posted on Jan 05, 2008

SOURCE: Gears of War for Vista and Logitech Rumblepad 2 directional issues (fwd/rev)....

you must edit the C:\Program Files\Microsoft Games\Gears of War\Engine\Config\BaseInput.ini and change the values from:

Bindings=(Name="XboxTypeS_A",Command="Use")
Bindings=(Name="XboxTypeS_B",Command="Jump")
Bindings=(Name="XboxTypeS_X",Command="ChangePosture")
Bindings=(Name="XboxTypeS_Y",Command="NextWeapon")
.
.
.
Bindings=(Name="XboxTypeS_LeftShoulder",Command="obj list")
Bindings=(Name="XboxTypeS_RightShoulder",Command="mem")
.
.
.
Bindings=(Name="XboxTypeS_RightTrigger",Command="Fire")
Bindings=(Name="XboxTypeS_LeftTrigger",Command="ToggleTargetingMode")

to

Bindings=(Name="XboxTypeS_B",Command="Use")
Bindings=(Name="XboxTypeS_A",Command="Jump")
Bindings=(Name="XboxTypeS_Y",Command="ChangePosture")
Bindings=(Name="XboxTypeS_X",Command="NextWeapon")
.
.
.
Bindings=(Name="XboxTypeS_RightShoulder",Command="obj list")
Bindings=(Name="XboxTypeS_LeftShoulder",Command="mem")
.
.
.
Bindings=(Name="XboxTypeS_LeftTrigger",Command="Fire")
Bindings=(Name="XboxTypeS_RightTrigger",Command="ToggleTargetingMode")

Posted on Jan 12, 2008

SOURCE: Logitech Cordless Rumblepad 2 connection problems

The front of the receiver is a button you have to press it down and then in the controller press button 5 and 7 down WHILE re-inserting battery. This like a master reset.

Posted on May 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Deiver logitech cordless rumblepad 2


Go to logitech.com -> Support + download section -> Gaming -> Check Gamepads on the right -> Select your gamepad -> Select your operating system -> Download and follow installation instructions

Nov 17, 2012 | Logitech Cordless Rumblepad 2 Vibration...

2 Answers

How can i use my rumblepad 2 on pc games like mafia II and call of duty modern warfare2?


There's a button you push, if it's on and you get no rumble, it's likely that it's not supported by the game itself.
There are two versions, cord and cordless. You should check out Logitech's support page for your controller here if you have more questions and want to make sure you have the latest software etc.
Hope this info helps!

Oct 16, 2010 | Logitech Rumblepad 2 Game Pad

1 Answer

I have a generic game pad bought from the shop "Game" its a chain in the UK. It works fine but is not recognised in Fallout 3 for windows. Any ideas. Looking a Fallout 3 booklet it would apear that only a...


Its half fixed using an Xbox360 emulator found here

http://www.jayceooi.com/2009/01/19/download-xbox-360-controller-emulator-for-pc-games/

The game now recognises the controller and allows you to map the button to moves/actions but once game play starts its not working
A lot of people have had 100% success but with so many software /hardware configurations it hard to a match. There are a load of forums regarding the emulator so I will be searching them in the coming days.

Regards
James

Oct 17, 2009 | Logitech Rumblepad 2 Game Pad

1 Answer

Gamepad use


The program that comes with the rumblepad allows you to map actual keyboard functions to each button.

Mar 07, 2008 | Logitech Cordless Rumblepad 2 Vibration...

2 Answers

Logitech controller not working


I have same problem, spoke to manufacturer who stated it will only work with games that are played from a disc and can not be used to play online flash games as they are not programmed to accept gamepads. does anyone know how to change settings or something on flashplayer to accept gamepad ??

Mar 01, 2008 | Logitech Rumblepad 2 Vibration Feedback...

2 Answers

Gears of War for Vista and Logitech Rumblepad 2 directional issues (fwd/rev)....


There is a way to fix it: go into your control panel under Game controllers, select your logitech cordless rumblepad 2 and hit

properties -> settings -> Enable Swap Mode -> close -> ok

Now start Gears of War and go into the options menu under controls for the controller.

Invert Axis = yes
Joystick Mode = Left-handed

This fixes the problem with the joysticks, but there is still a button fix that needs to happen. operations for buttons 2&3 are swapped, same thing with buttons 1&4, 5&7 and 6&8. I don't how to fix this problem yet.

Dec 30, 2007 | Logitech Rumblepad 2 Vibration Feedback...

16 Answers

Gears of war problem


Simple fix for forward-back movement axis inversion:

In "My Documents\My Games\Gears of *** for Windows\***Game\Config", edit the file "***Input.ini". At the very top, under the section "[Engine.PlayerInput]", change your MoveForwardSpeed to a negative number, like this:

MoveForwardSpeed=-1200

Note that I only play offline, and this setting in this file works great for me with Logitech Rumblepad 2 (although all of the other buttons are still a little off, but that I can live with). I tried every other reference to forward-backward movement and the left Y axis in this file, as well as "<installdir>\Engine\Config\BaseInput.ini" and "<installdir>\***Game\Config\DefaultInput.ini", so don't bother with those...

Dec 08, 2007 | Logitech Rumblepad 2 Game Pad

1 Answer

Not compatible with windows vista


Hey Guyz Just Go 2 Google And Search for lgs501.exe or LGS501.exe to Download, and then download and install the application on your Vista PC .Plug in the Gamepad(Rumblepad2 or 1) In ur USB Wen ur Installing it.
THEN UR RUMBLEPAD 2 OR 1 SHOULD WORK 100% PERFECLTY + BIT MORE EFFECTS AS YOU HAVE DX10.

If youll have any problems\Errors in installing or playing or if you need any original softwares,Games,Cracks,Patches,Drivers,Help,Gamepad Drivers or Help JUsT EMAIL TO --- arjunmanoj23@hotmail.com

Nov 01, 2007 | Logitech Rumblepad 2 Vibration Feedback...

1 Answer

Logitech wingman cordless rumblepad


Just install the drivers and software which followed with the product. You can download the software from aswell: http://www.logitech.com/pub/techsupport/joystick/lgs460enu.exe Further instructions should be on the CD.

Jun 22, 2007 | Logitech WingMan Cordless Rumblepad Game...

Not finding what you are looking for?
PC Game Controllers Logo

Related Topics:

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech PC Game Controllers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

508 Answers

Are you a Logitech PC Game Controller Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...