Question about Kenmore 82822 Electric Dryer

1 Answer

Kenmore Elite HE3 dryer stays cold

My kenmore elite HE3 electrical dryer is always cold when i put the wet clothes in and it does not dry can you help me

Posted by on

  • 2 more comments 
  • Anonymous Mar 16, 2014

    I have lost earrings. Is there a trap in the dryer beyond the lint trap?

  • Anonymous Mar 16, 2014

    Does the Kenmore Elite he3 steam dryer have a trap to catch jewelry, etc beyond the lint trap?

  • Anonymous Mar 23, 2014

    not always drying cloths completely

  • Anonymous Mar 24, 2014

    will not produce heat on any setting

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

You probably need a new heater element.

Posted on Dec 13, 2008

1 Suggested Answer

milten1
  • 1304 Answers

SOURCE: Kenmore Elite He3 dryer..fine on timed but leaves cloths wet auto

find the metal sensors in the drum
scratchem up with sand paper

especially if you wash rugs, sneakers , or anything with acyrlic

Posted on Oct 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't it start?


Free Kenmore Clothes Dryer User Manuals ' ManualsOnline ...

laundry.manualsonline.com > ... > Laundry Appliance Kenmore
Products 1 - 50 of 65 - Kenmore ELITE HE3 Gas Dryer User's Guide 110.9787 9789. Pages: 0 ... Kenmore 27-Inch Wide Electric Dryer Owners Manual. Pages: 0 ...
Whirlpool & Kenmore Dryer Repair #02 - Won't Start or Run ...? 7:29https://www.youtube.com/watch?v=SPRqKVE8JfYOct 21, 2011 - Uploaded by canyonman1963... and repair a Whirlpool or Kenmore electric dryer that will not start or run. ..... I have a Kenmore Elite Oasis ST Dryer, model number 110.78082701. During ... Dryer Troubleshooting - NotDrying or Taking a Long Time to Dry ...How to take apart Kenmore Elite Dryer - YouTube? 6:28https://www.youtube.com/watch?v=QNa6zfzrm5kOct 16, 2012 - Uploaded by RenewApplianceI have a kenmore elite 79661423410 electric dryer stoppedworking manual says has no thermal fuse and I can't take it apart help thank you.

Dec 12, 2015 | Kenmore HE5 Electric Dryer

1 Answer

I have a Kenmore Elite HE3 model 11094834200 it heats up for about 5 minutes and than stops heating. I replaced the thermistor thinking that was the problem but it wasn't. If I try re starting t


Number 34 is the sensor strips located on the rear bulkhead inside the dryer. Clean them thoroughly with Windex or 409. Dryer sheets build a wax buffer on them sensors that moisture cannot penetrate. If no wetness is detected the control shuts her down thinking them clothes is did. Either that or you forgot to reconnect the sensor wire when puttin her back together Kimosabe.

Jul 10, 2012 | Kenmore Elite HE4 Electric Dryer

1 Answer

The dryer door always pops open stopping the dryer... how do I make it stay shut so the clothes will get dry without having to close the door every other minute?


Try putting less of a load in dryer. The weight of the clothes riding against the door, may be the reason why it pops open.

Apr 05, 2010 | Kenmore Elite HE3 Steam 8674 Dryer

1 Answer

Kenmore Elite He3 dryer..fine on timed but leaves cloths wet auto


find the metal sensors in the drum
scratchem up with sand paper

especially if you wash rugs, sneakers , or anything with acyrlic

Oct 05, 2009 | Kenmore Elite HE4 Electric Dryer

1 Answer

My Kenmore Elite he3 is no longer drying clothes.


Hi
Please, the heater seems not working "
27593276.jpg My Kenmore Elite he3 is no longer drying clothes", what I need to check or do? thank you.

Mar 30, 2009 | Kenmore Elite HE4 Electric Dryer

2 Answers

Kenmore Elite dryer heats but does not dry


Make sure that your vent tube is not kinked or crushed behind the dryer and it all this is ok then you need to change your cycling thermostat. is it gas or electric

Mar 12, 2009 | Kenmore Dryers

1 Answer

Kenmore Elite HE3 Dryer clothes not dry after cycle


it sounds like a clog in vent.if yours vents up thru roof you may need to have a chimney sweep come out and sweep vent.check and make sure the vent hose is net kinked or full of lint.

Mar 06, 2009 | Kenmore Elite HE3 Steam 8674 Dryer

1 Answer

Kenmore elite he4 dryer wont run


Hi! crystal2hd
My he3 dryer does not have a door lock. The door switch turns off the light and allows the dryer to start. Make sure this switch is not damaged. Unplug the dryer before removing the front cover.
InMrFixIt

Aug 27, 2008 | Kenmore Elite HE4 Electric Dryer

1 Answer

HE4 Kenmore Elite Dryer error code 4e


If you have ever removed the lint filter area completely via the screws that hold the plastics in so you could clean it then remove it again and insure that you plugged in the two wires that go to the strip sensor.. (moisture sensor)

May 16, 2008 | Kenmore Elite HE4 Electric Dryer

Not finding what you are looking for?
Kenmore 82822 Electric Dryer Logo

Related Topics:

643 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...