Question about Kenmore 14416 Humidifier

1 Answer

Kenmore 14416 Humidifier keep Showing CF on display.

I have lost my manual, but I think that the CF flashing on the display means change filter. If I remember this is a way to turn this message off. But with out the manual don't know what the sequences is. Can someone help me?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 944 Answers
Re: Kenmore 14416 Humidifier keep Showing CF on display.

Contact these guys and they should be able to let you know where to get a user guide. unfortunately they dont seem to have them online - please complain to them in the hope they might make this available instantly Hope This Helps :)

Posted on Mar 10, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Have a MA0800, have changed the filter but can't clear the flashing CF display.

You have to unplug the unit from the electrical outlet. Just shutting it off won't clear the CF code.

Jan 12, 2013 | Essick Air MA0800 Humidifier

1 Answer

Humidifier what does CF stand for

It may mean "Change Filter." After you replace the filter, unplug the humidifier for 30 seconds, and then you plug it back in, the CF code should be gone.

Dec 04, 2011 | Kenmore 14410 Humidifier

1 Answer

CF is displayed on my humidifier...what is that?

Check Filter Indicator

The ability of any humidifier to efficiently supply humidity output relies heavily on the

condition of the filter. As the filter loads with impurities it gradually loses its wicking

capability. When this happens, moisture output is reduced and the humidifier has to work

longer to satisfy the selected setting. This humidifier has a check filter reminder timed to

appear after 720 hours of operation. When the Check Filter (CF) message is displayed,

disconnect the power cord and check the condition of the filter. If a build-up of deposits or

severe discoloration is evident replace the filter to restore maximum efficiency. The CF
message is reset when the humidifier is plugged back in.

Mar 05, 2011 | Bemis 826 800 Humidifier

1 Answer

I have the MA0800 and I have a CF flashing on the display. How do I get rid of this code? If it requires a clean filter, then how do I reset this code once I have a clean filter?

Change the filter then unplug the unit from the electrical outlet and the code will be cleared. Just shutting the humidifier off won't clear the code, it has to be unplugged from the power to clear the flashing CF.

Jan 21, 2011 | Essick Air MA0800 Humidifier

1 Answer

Motor on one of the fans burnt out-is it repairable?

Brief research on Kenmore products looks promising--
Sears claims to have all parts, no matter where you bought it--

Here is the link to Humidifiers:

Let us know if this helps

Mack B

Jan 15, 2011 | Kenmore 14416 Humidifier

1 Answer

I have lost my manual. readout on the digital display is CF. humidifier operates fine. what does the display CF mean?

It means Change Filter.

However, assuming that you have done that in the recent past, you probably want to know more. I'm not sure how this actually works (that is why it shows CF). I saw it for the first time after 2 or 3 years of using my humidifier. (And I had just changed the filter a week or so previously).

You may have to turn the unit off/on or even unplug it to clear the message, then it should operate normally.

Nov 05, 2010 | Emerson HDC12 Humidifier

1 Answer

Kenmore homidifier will not start

You must place the top on correctly. The water level shaft must be inserted into the hole as you place the top of unit on the humidifier!!!

Jan 24, 2010 | Kenmore 14416 Humidifier

3 Answers

Replacing filters in a kenmore 14416 model humidifer

There are 2 filters on each side. They are simply stood up right in the tank and the Black Circular fan shields rest on top of them to keep them in place.

Feb 17, 2008 | Kenmore 14416 Humidifier

3 Answers

Kenmore 15408 Humidifier How to Reset CF

Per the owner's manual, you simply unplug your device for 30 seconds. Upon plugging it back in, the CF notification should be cleared.

This assumes you have also changed the filter, of course.

Feb 08, 2008 | Kenmore 14410 Humidifier

Not finding what you are looking for?
Kenmore 14416 Humidifier Logo

Related Topics:

758 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Humidifiers Experts


Level 3 Expert

93799 Answers

Sr. Pelo
Sr. Pelo

Level 2 Expert

72 Answers


Level 3 Expert

6993 Answers

Are you a Kenmore Humidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides