Question about Now Evolution Breitling Chronomat Evolution 756 B1335611/G570 -eBook

1 Answer

Breitling Airwolf analog/digital time sync

Hey, I have the same problem as you where my digital time and analog time are different. How did you fix the problem?
Thanks!

(The product i selected when asking this question is not the actual one, Breitling Airwolf was just not available...)

Posted by on

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

On the Breitling there is a "mode" button. Pressing this cycles between the various modes - Time in Zone one, Time in zone two, alarm 1, alarm 2 and so on. The mode you are in is displayed in the mode window and while that is displayed moving the analog hands also moves the digital figures.
At one point though pressing the mode button results in a blank in the mode window. This is in fact NUL mode. In that mode changing the hands does NOT change the digital display so in this mode you can synchronise hands with digital.
Nul mode is easy to miss because the mode panel is just blank so its easy to think that the watch is just not responding to pressing the mode button!
.

Posted on Dec 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, I want to set up my router to my DCM425 modem (from Time Warner). So far I cannot access the internet on my laptop. I get internet fine when the modem is directly plugged into my laptop, and I can also...


1) Make sure the cable is plugged into the Internet port (or whatever the appropriate port is, since you didn't specify exactly which router).

2) At your router's configuration page, make sure DHCP (Automatic) is selected.

3) After connecting to the router, if it still does not work, open up the command window by going to the search box in the Start Menu or click Run... and type "cmd".

4) Type "ipconfig /release". Wait until this is finished.

5) Type "ipconfig /renew". Wait until this is finished.
This should have given you an IP Address.

6) Try to connect to a website.

Jun 04, 2011 | RCA DCM425 DIGITAL CABLE MODEM (RCADCM425)

1 Answer

Hiro USB modem, vista cannot detect. It is in


I THINK THE PROBLEM IS IT IS ANALOG AND WE LIVE IN A DIGITAL WORLD, MEANING IT PROBABLY ISN'T COMPATIBLE.

Jan 09, 2010 | Hiro (H50113) Analog Modem

1 Answer

Power light is red but wireless light is green


Hey bro... the problem ur facing is with the power cord... Try changing the power cord and test ... It should work.... If it doesnt you need to change the whole unit itself. ... But anything before that you can always contact ur ISP for further info. They might replace it for you free if there is a need to.. T&C apply. Check with your local ISP... Thanks. Any more issues or any problems furthermore pertaining to this modem - You can always post it and we can fix it :)

Oct 19, 2009 | 2wire (1000-000057-000) Modem

1 Answer

Wireless is connected,but no internet


hey dear,
thanks for your time.... now, as i understand you correctly.. even though you seem to be connected ot the internet wirelessly, you are not able to pull out webpages right?

Try to power cycle the modem.. turn off modem and the computer for about 5 minutes... then try to power it on.. wait for the lights on the modem to turn green and then try to connect... you should be connected. good luck

Got forget to rate me....... take care.

Oct 25, 2008 | Siemens SpeedStream Modem (4100) (SS4100)

1 Answer

Audiocodes MP118 8 FXO early media to Freeswitch SIP extension


Hi, man.
There are many things to consider in this type of application.
when calling from PSTN to IP using analog lines from time to time you will have this type of event, I suggest working with H323 protocol, this will tone down a bit your problem.
If you want optimum performance, you should use a DID with the channels you need and address to your PBX SIP FreeSwitch. The DIDs are cheaper and are digital which eliminates random connectivity problems in the incoming call.
Once you have directed the DID you tell your server to transfer the call to the IVR using your internal dialing plan.

Lucky

Oct 06, 2008 | AudioCodes MP118 Analog Modem

1 Answer

No modem driver


http://members.driverguide.com/

Jun 30, 2008 | Modems

1 Answer

LINKSYS PHONE ADAPTER with ROUTER MODEL NO: SPA2102-R


hi pravin
this is the link for your help and if you need you can ask any further help regarding to this
on this link you will fine all possible information regarding this device
http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1146582254856&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=5485645678B91

Mar 25, 2008 | Linksys SPA-2102 NA Analog VoIP Adapter...

Not finding what you are looking for?
Now Evolution Breitling Chronomat Evolution 756 B1335611/G570 -eBook  Logo

1,387 people viewed this question

Ask a Question

Usually answered in minutes!

Top Now Evolution Modems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

yadayada
yadayada

Level 3 Expert

61169 Answers

Are you a Now Evolution Modem Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...