My pioneer avh p6800dvd the 6 disk changer is not working
I was listening to my audio system and it just stopped playing and gave me an error message. Now it will not eject my cd's or play them. I hit the reset on te ssytem but now it reads that my cd's are not in the system. Then all of a sudden it recognizes the cd's as "unknown" but when I touch the cd to play it powers off the system. What the heck is going on????? Please help
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Error 1.Battery inside CD Changer needs to be replaced. Error 2.CD error message. Mechanism has as eject problem or takes a long time to select CD. Error 3.CD error message. The pick-up is out of focus during play mode due to scratches on the disc or contamination. Error 4.Connection problem. Reconnect the data cable. Error 5.CD error message. Could not read correct data due to CD ROM. Error 6.CD error message. Could not read data from disc because it is upside-down.
For error code 6: Try an original purchased cd with no scratches and see if the cd player reads it. If yes then lens is dirty or tired so try using a cleaning cd(has little brushes on it). If it doesn't read with the original cd try using the cleaning cd and if no go then look at purchasing a new cd player!
it might be hooked up so that you have to have the parking brake on while you play dvds or you might have to turn your dimmer all the way down for it to play while driving. does it play the audio and everything when you put a dvd in but wont displau if so then that is your problem.
I had the same exact problem with the 4100DVD I got on 5/01/09. I reset my Ipod via the Itunes software. This will wipe your Ipod clean and reinstall everything. I was a bit leary about this but gave it a shot and viola! It is working just as it was when I first purchased 5 days ago.
Make sure you back up your Ipod first. After the reset, it will ask if this is a new install or restore. Select restore and everything is back again, including downloaded games and app. (I have an Ipod Touch)
These changers have a problem with some switches that are on top of the cd mech. They must be cleaned with the proper chemical and not too much being used. You can easily spill it into the cd mech where the laser is at and cause a lot of damage to the laser. There are micro switches that detect the position of the disc tray going into and out of the magazine and when the cd mech actually loads the cd into position to play it.
When you turn your car off and back on again, it reset the micro enough to where it can start over again.
This is not a job for anybody who is not experienced with this type of work, you could try, but then it is very likely you could cause more damage to the changer than when you started.
I can offer you more help if you like, let me know.
If you found this information helpful a rating of "FixYa" would really be appreciated.