Question about DISH Network IR Remote Control

1 Answer

Menu button won't work

I have a Dish IR 103602 and programmed it to work on my Mitsubishi Big Screen TV model VS-5041 but the menu button won't work

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 374 Answers

The codes that are provided to operate the tv from a Dish remote will not offer full functionality with most TV's. The menu button on the Dish remote even when able to bring up the menu screen on TV's is unable to navigate the menu screen due to the complexity of the TV's set up. The newest receiver that Dish has on the market is the 222k which is a dual tuner/two room HD receiver without DVR that has LEARNING REMOTES that might be able to accomplish the goal you are trying to obtain. I hope this answers your question and remember to keep the original TV remote in a safe place so that you can use other functions on your TV as well. Thanks for using Fix Ya and let me know if I can be of further assistance.

Posted on Dec 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's the matter with my Mitsubishi Big Screen Tv Model VS-5041?


just re-read the trouble-shooting section of your owners manual and check the setup on your remote

May 26, 2013 | Mitsubishi VS-5043 50" Rear Projection...

1 Answer

On our mitsubuishi vs-5041 50 inch there is a black box aroung the picture of the tv. I dont have the remote, so how do i get the television picture back?


Hello.
You can use buttons that are located in front of the TV as well.
Press "menu" button and locate "picture" or "video submenu. You can use some buttons as directional ( they have arrows that indicate where you can move highlighter on menu). To choose option you can press "Select/enter" button.
More info in your TV owner's manual.
Regards.
Russ.

Dec 01, 2010 | Mitsubishi Televison & Video

1 Answer

How can i program ir remote 103602


Hi basha538my name is Mike Houston of DISH Network, there are a few easy steps to programyour remote to your receiver and TV if needed. To program your remote to yourreceiver you will want to get to the System Info screen and you can pull theSmart Card out to do that, then you will press and release the SAT button andpress the Record button. I will send a link that shows how to do both steps aswell. http://www.dishnetwork.com/SupportSection/remote-setup

Sep 17, 2010 | DISH Network IR Remote Control

1 Answer

What are the codes for the dish 103602 satellite?


The codes depend on which device your are trying to program your remote to. you can get this list at www.dishnetwork.com/tech. when you get your 3 digit code. For instance you have a sony Tv, the code is 500, Press an hold the clear tv button at the top of the remote till all mode buttons light up, then release, then enter 500 then the # key and your remote will now work your Sony tv. If you still cant find the codes repost with brand of equipment you want top program.

Nov 29, 2009 | DISH Network IR Remote Control

1 Answer

Need sharp tv codes


The codes for a Sharp are 526, 585, 591, 605, 606, 607, 608, 628, 629. Thanks for using Fix Ya.

Jun 02, 2009 | DISH Network IR Remote Control

1 Answer

Only VCR button lights when I hit power


OKAY IF YOU NEED ASSISTANCE PROGRAMMING THE NEW REMOTE TO THE TV OR RECEIVER LET ME KNOW. THANKS FOR USING FIX YA AND FOR ALL CAPS.

Apr 19, 2009 | DISH Network IR Remote Control

2 Answers

My one for all won't program...


dish network remotes are universal, you can program your receiver, vcr/dvd, telivision and stereo to most remotes. if you need info on this just post again, otherwise i would list your issue under the remote brand

Jun 24, 2008 | DISH Network IR Remote Control

1 Answer

50" MITSUBISHI BIG SCREEN (MODEL#VS-5076,


INITIALIZE THE SYSTEM CONTROL. WITH THE REMOTE CONTROL PRESS "MENU 2, 3, 5, 8, " USE THE ADJUST BUTTON TO SELECT "INITIAL" AND PRESS "ENTER"

Mar 17, 2008 | Televison & Video

2 Answers

Mitsubishi VS-5041


if you know someone with a dish network remote they have a cancel button.... i had the same problem and fixed it this way

Mar 17, 2008 | Mitsubishi VS-5043 50" Rear Projection...

Not finding what you are looking for?
DISH Network IR Remote Control Logo

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

brian soufane

Level 3 Expert

693 Answers

john milligan

Level 3 Expert

512 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...