Question about Panasonic Lumix DMC-LZ2 Digital Camera

1 Answer

Cannot download pictures from my camera.

I have done this dozens of times, but no luck today. The camera does not come up with the fact it is linked to the computer, which it was. Tried taking memory card out and downloading through other device, but no luck although the pictures are clearly on camera. My husband tried on his computer but got thhe same results. I am supposed to have sent some to the paper by lunchtime Mon for publication, so this is a real problem. Help please.

Posted by on

  • mairi_christ Dec 12, 2008

    No to all Mairi

  • mairi_christ Dec 13, 2008

    I said it was inappropriate because you had asked the questions which I had covered in my original question. You made no suggestions to try and remedy the problem You have made no further effort to help me - just sent a rather piqued request for me to upgrade you without suggesting anything further I could try. In your position you would get better grades if you tried to be pleasant to customers with problems rather than demand an upgrade for nothing. MSC

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

Hi,
Let me know does your PC recognize camera via USB port ?
Do you see any error when you connect camera with PC?
Is there any file corrupted message comes when you transfer files / pictures to PC?

Posted on Dec 12, 2008

  • Shahid Electronics
    Shahid Electronics Dec 12, 2008

    what was wrong if I asked few questions about your problem? I'm trying to help you and you rated me Inappropriate?
    Do you mind to change it as this rating hit my ranking badly.

  • Shahid Electronics
    Shahid Electronics Dec 13, 2008

    Excuse me, This is free forum and you posted question in free area so not a customer. I spend my time to help others for free and when they slapped by such rating...becomes difficult to follow up.
    I was collecting info to suggest some thing.
    I did not asked you to rate my solution because there is no solution yet.
    You may please check again my first 3 lines query, it is not solution and it was just info request for better understanding.
    Any way, you have done what you can do yet I would suggest to use another usb cable so PC will recognize camera.
    Most probably usb cable is internally broke. You can test / check existing usb cable on another camera, if possible.
    Have a nice time.



×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car trys to crank but security light comes on have to wait 15 min and it may or may not start


This is a VERY common problem on GM vehicles. Go to this link and read it all. There is a lot of info on the site, plus pictures and links for you you fix this yourself. You can fix this yourself and save your car. Ive done it dozens of times for friends and family. Any questions, comment back on this. Good luck

http://vatspasslockpasskeysecurityhelp.yolasite.com/

Jun 06, 2011 | 1997 Buick Skylark

4 Answers

I own a Canon Power Shot S410Digital Elph which was purchased about four years ago. At the time I installed the Digital Cameta Solution disk and the ArcSoft 1.3 in my HP Laptop which said it was for...


Many times the older version drivers will work as new released operating systems try to be backwards compatible with software. Try loading the XP software or search the Canon website for updated software for your model.
Dan

Mar 19, 2008 | Cameras

1 Answer

Installation software for VGA PC Camera 25-157 won't run/finish


Download the microsoft clean up utility and look for any programs relating to webcams - logitech etc.
You may have old software in your registry creating a conflict.
http://support.microsoft.com/kb/290301

Apr 25, 2010 | Radio Shack VGA PC Camera Webcam

1 Answer

No connection found


Try using a separate card reader to download your pictures to a folder you create on your desktop.

Aug 31, 2009 | Canon PowerShot S60 Digital Camera

1 Answer

Help


It's very hard to troubleshoot software problems online, and it likely is a software issue. But why put up with the headaches of bad software in the first place? Please see the following blog article, as it describes the use of a card reader as a much easier, faster, and less error prone way to download your photos. In fact there are several important reasons discussed in the article for using a card reader vice downloading from the camera. USB Card readers are also very inexpensive these day, with cost virtually not an issue:


http://camerarepair.blogspot.com/2009/01/how-do-i-download-photos-or-pictures.html

Feb 19, 2009 | Canon PowerShot SD1000 Digital Camera

1 Answer

Downloading (exit thread)


hi.. i would uninstall whatever disc you had to install when you setup your camera with your pc.. then reboot and try reinstalling the info again and that should help clear it up.. if you do not have the driver and manual info here is the link that will help:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=320&modelid=14904

good luck..d

Jan 21, 2008 | Canon PowerShot A560 Digital Camera

1 Answer

Changing to USB


I had the same error today. The solution is the manual. If you dont have the manual you can download it from panasonic. If I had my camera with me i would wlk you through the steps. Start by pressing the mune button. Just navigate through the setup area.

Jan 11, 2008 | Panasonic VDR-D100 DVD Camcorder

Not finding what you are looking for?
Panasonic Lumix DMC-LZ2 Digital Camera Logo

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Cameras Experts

kakima

Level 3 Expert

100304 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

71088 Answers

Are you a Panasonic Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...