Question about Whirlpool LTE6234D Top Load Stacked Washer/Dryer

1 Answer

Whirlpool stackable washer/dryer. Dryer squealing

I have a Whirlpool stackable washer/dryer model #LTE6234DQ0 and the dryer is squealing. The rollers have been replaced. Any ideas?

Posted by on

  • buxy100 Jan 19, 2009

    washer tub is tilted how do I fix this?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 113 Answers

Could be the idler pulley, or the dryer seals.

Posted on Dec 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a thin twin #LTE6234D that squeals when it starts. I need to know how to replace the belts that are slipping.


Hi,
Which unit squeals when you start it, washer or dryer? Washer is direct drive and this noise would be from the pump area. Dryer could be Idler pulley or rear roller issue. If the belt is the issue, the front of the dryer would need to be removed in order to replace the belt, control panel needs to be removed first the disconnect the door switch. Remove the 5 screws to the front panel and replace the belt. But I would think its a idler or roller issue first over just a belt.
Good Luck

Sep 10, 2011 | Whirlpool Washing Machines

1 Answer

I have a Maytag stackable washer dryer Model #MDE2400AYW A repairman has diagnosed a problem with a rim that goes around the front of the dryer barrel which rotates the dryer. The bearings have worn...


If you need the whole housing we have it available for about $45. But usually you just need the bushings $35 part # AP4045830 . If you enter your model # at www.appliancehelponline.com diagrams will come up on the left hand side you will see the housing and the bushings that support the front of the drum. There are also videos of repairing similar bearing types. All parts come with installation instructionsand are ready to ship. It is an easy inexpensive fix.

Jan 10, 2011 | Whirlpool LTE6234D Top Load Stacked...

1 Answer

I have a stackable washer/dryer whirlpool model #WET3300SQ1. Heating element in dryer is not heating. We have replaced the heating element and it is still not working.


Hi,

If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.


if you dryer is gas check out this gas no heat tip....


If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.


check out this electric no heat tip...


heatman101

Aug 18, 2010 | Whirlpool LTE6234D Top Load Stacked...

1 Answer

Loud rubber squeal sound with new clothes washer water seal.


its the wrong seal. do not lubricate it at all rubber sweals with any kind of petrolium product. many door boots look right for the model but will be thicker then needed. and will cause rubber to hit the basket. 

Feb 08, 2009 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Matag stackable My Drier Squeals loud on start up


could be motor put oil on back baring aka rollers

Jan 29, 2009 | Maytag LSE7806A Top Load Stacked...

1 Answer

Frigidaire stackable washer-dryer


I would check the manual.

Mar 22, 2008 | Washing Machines

2 Answers

Dryer makes a loud squeaking/squealing noise while drying.


If the dryer model number begins with 417, the drum is supported by a ball bearing in back, and a seal and glides up front. Often, the bearing will become very dry, either from years of use, or from excessive lint blowing up into the bearing. If the bearing isn't cracked or otherwise noticeably bad, you can usually solve the issue simply by lubing the bearing with a high temp grease. While the machine is apart...(a major pain in the butt), make sure to check the condition of the seal and glides on the front panel, and replace the belt if it looks at all cracked or frayed.
If this dryer is not a 417 and/or does not have a rear bearing, it's best to get a maintainance kit (belt, idler pulley and drum rollers) and install all the aforementioned parts, as they are the most likely source of screech. Also, check the motor by spinning the shaft manually with the belt off....if that is squeeking, it's motor
time.

Jan 15, 2008 | Kenmore 98702 Stacked Washer/Dryer

Not finding what you are looking for?
Whirlpool LTE6234D Top Load Stacked Washer/Dryer Logo

668 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...