Question about Sanyo AVM-1909S TV

1 Answer

No picture on tv

My sanyo tv has been working fine until one day when I walked into the room and it had fallen. I think it may not have been sitting flat when i left the room. When i re-entered the room, i found the tv had fallen about 3 feet onto the floor, with the screen on the floor. I set it back up, and the sound works fine on all the channels, but the screen just stays black. I tried to re-plug it in and it didnt work. can you please help me? If i cannot fix it myself, then how much would it cost to get it repaired? Thank you

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 168 Answers
Re: no picture on tv

Probably you need to replace the picture tube or maybe theres a loosed connection in the high voltage circuit or the video circuit due to the fall. if the picture tube is the problem, you better buy a new tv coz replacing it is not practical and economical. but if it is only loosed connection just bring it to a qualified technician for sure he will not charge you too much for this problem. good luck!

Posted on Mar 10, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Sanyo DP46840 purchased less than 1 week ago from Walmart. Worked fine for first couple of days, now HDMI connections don't work. monster cable works on other lcd tv and all video sources. rest TV...

Hi gregschirk,
I bought the same model and I am experiencing a similar problem. My HDMI components worked fine before. Now both my cable box and DVD player will not be recognized as HDMI systems. It thinks they are DVI to HDMI connections. Good picture but no sound. Would like to know if there is a fix for this.
Thanks Gilbo72

Nov 27, 2010 | Sanyo Standard (CRT) Televisions

1 Answer

My sanyo was working fine, then a child hit a button and now it says no input signal sources could be located how do I fix this

The TV has different inputs modes, the TV tuner being on of them, another mode(s) will accept an input from the input jack(s) on the back, front or side of your TV. Look for and source button or input button on the front of the TV, press it waiting a few seconds between each push until the picture returns.

Jun 19, 2010 | Sanyo DS27910 27" TV

1 Answer

I was watching my tv (sanyo) with cable hooked to it. The cable all of a sudden went out. I tried hooking up the dvd player and the tv is no longer recognizing the cable box or dvd player. I don't know...

sound like a tuner problem. there is a resistor that goes to the tuner that could of went bad 39,000 ohms i think which should have a orange white orang strips around it and a gold. anyway there is a problem with tuner. Sanyo was good about haveing a problem with tuners in there smaller sets. If you do not know anything about how to repair you probly shoud take to a shop but the total cost might be high and not worth it in the long run. think before you jump still water runs deep.

Mar 06, 2009 | Sanyo AVM-2506 TV

2 Answers

TV has a thin horizontal line across the screen

intermintence in vertical IC deflection its a job for experienced tech need to look for that circuit and do fine job resolding that IC

Apr 01, 2008 | Sanyo DS31590 31" TV

1 Answer

Blur picture

First check the antenna! After that, look for colour changes/ shadows alongside text on screen, of some particular colour. Has the set been dropped? If so, static convergence can be knocked out, you need a professional.
If it is just generally blurred, obviously something has changed, but it might respond to adjustment of the focus control (inside set). This is still a job for a serviceman if you don't know anything about TV circuitry.

Mar 25, 2008 | Sanyo DS27225 TV

1 Answer

Sanyo DS27880 27" TV, Dish signal lost after tv turned off, doesn't return

checks should on your tv tuner it could be bad.IF circuit should also be check and the video section call in the tech to make checks on your tv.and to do repairs on your tv.

Jan 19, 2007 | Sanyo DS27820 27" TV

1 Answer

Sanyo Flat Screen (DS27910) "Grey" Screen

dont know for sure but i think that the tube is going bad. Have one in my shop doing almost the same thing.Taped on the tube and it does strange things. My tube tester wont test this kind of tube that is in these sets.Not much help but it is a start.

Sep 17, 2006 | Sanyo DS27910 27" TV

2 Answers

Tv has no picture

sounds like a antenna block problem or a tuner?? Now Im wondering if this set has mutiple antenna inputs?? if it does then the antenna input switch is on the wrong mode.

Apr 06, 2006 | Sanyo DS31520 31" TV

Not finding what you are looking for?
Sanyo AVM-1909S TV Logo

Related Topics:

649 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66413 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sanyo Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides