Question about Projection Televisions

Open Question

I have a Denon AVR-1717 receiver and have had it for 6 months now. But last week the remote controler has stopped working. The red light just stays on. I have changed the batteries but the light is still on and it won't work. I have a Panasonic TV I am suppose to reprogram it? And if so how? Or what do I do? What is wrong? Thank you

Posted by on

6 Suggested Answers

SOURCE: Sony KP-57HW40 Error Codes 6 & 8

just fixed my arching green lines on my sony kp46wt500 used the info at somelifeblog.com great info and step by step instructions. if you can use a screw driver you can fix this problem in 20 minutes from start to finish

Posted on May 17, 2008

  • 1 Answer

SOURCE: Color Fading on Zenith E44W46LCD

I have this TV. Lamp indicator came on and freaked us out so we shut the TV off until we could find a reasonably priced bulb. I bought a lamp (bulb) from discount-merchant (best price!) and we changed it out...easy enough process, however the "change lamp indicator" orange light remains on and the TV now has a lovely yellow spot in the middle of it. After arguing with my husband that he didn't install the lamp correctly, I have read for the past two days MANY of the same issue with this specific TV. We've had it 5 years in August so I guess that is about the life of this TV and a big apology to the hubby. :)

Posted on Sep 02, 2008

SOURCE: My Logik L22LID628 tv has

We have had two of these tvs break within 2 days of purchase, in our case both times it seems to be a backlight failure. Did you wall mount your tv? If so when you take the base off it leaves a hole in the casing leaving circuitry visible. I think it's very easy to damage the ciruitry.

Posted on Nov 03, 2008

  • 11 Answers

SOURCE: dead tv :-(

replace all caps in the psu.

Posted on Mar 19, 2009

  • 304 Answers

SOURCE: Akai KC02-E1 Remote with new batteries stopped working.

First, You cannot resync the remote, Second the IR sensor may be bad on the tv and third, the Digital bd may be bad. The IR sensor connects directly to the Digital bd which is the brains of the tv. Also, there maybe a stuck button on the remote or the buttons on the tv.

Posted on Jul 16, 2009

  • 42 Answers

SOURCE: LG rear projection tv. sound but no picture.

Go to a repair centre, some parts must be fixed/replaced.

Posted on Jul 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red light stay on tv on no picture


try replacing the batteries in the remote control.
maybe the remote control has stopped working, you might want to get an aftermarket remote such as a one4all.

May 26, 2015 | Projection Televisions

1 Answer

The TV keeps shutting off, then shortly after turns back on, then shuts off again... Plugging the cord into a different wall outlet doesn't solve the problem. Please help! Thank you


I'm having the same problem. My TV will play for for awhile and then it just dims down for about 1 to 2 minutes then powers up again. The green light stays on doesn't blink at all, and there is no red light that comes on or blinks like when our lamp went out. We replaced the lamp about 6 months ago and it's been working great until this week.

Oct 25, 2010 | Sony Grand WEGA KDF-60XS955 60" Rear...

1 Answer

I have a Panasonic PT50LC13 Television. For about the last month when you tried to turn it on, it would come on then quickly turn back off and you could hear the fan running then the red light would blink....


For that model, there is a ballast kit that would need to be installed. A diode and 2 caps need to be replace on the ballast. Check the lamp as well.

Dec 16, 2009 | Projection Televisions

2 Answers

I want to find the Sky remote code for this Tv.


Just got an LG 42LH2000 and code 0206 works

May 16, 2009 | LG Projection Televisions

1 Answer

Have a denon avr 588 surround reciever that does not stay on the on/stand by button has a red light that is flashing it powers on for about 3 seconds then shuts off and then the red light starts flahing


this could be two wires touching on the back connections. one wire touching another ...just one will do this! look close and causing a short (its shutting off is a safety feature so the unit does not overheat)

Dec 08, 2008 | Projection Televisions

1 Answer

RCR312W problem


I believe the remote is losing its program. Have you tried to reprogram the remote?

Jul 09, 2008 | Projection Televisions

1 Answer

Hitachi 43UWX10B


you need the front panel PC board . You can get one most likely at the following link, just leave them an email and indicate your model number and what youre needing they will respond quickly.
http://servicemanuals.vstore.ca/

Jun 18, 2008 | Hitachi 43UWX10B 43" Rear Projection...

1 Answer

Convergence ICs


the green is half controlled by half of each of the convergence Ics meaning green horizontal is controled along with the red and green vertcal is controlled along with the blue Ics. So if you have replaced both Convergencs ICs the problem is most likely a resistor that is in the green circuit. You will need a schematic to locate which resistors are in the green vertical and horizontal convergence circuit

Jun 07, 2008 | Toshiba 55H70 55" Rear Projection...

3 Answers

Dead tv :-(


ai have the same fault on my tv will not swith on any help any1

Mar 22, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...