Question about Portable Televisions

1 Answer

Storing channels hello there! i have an old samsung cb 3312z portable tv,but no remote, how to find and,more important,how to store channels?thanks in advance!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

By the menue!

Posted on Dec 14, 2008


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bought this tv without remote, need to get to AUX/AV channel. How do I do it?


you cant , you will need remote
or the code stored in a device that can send it by infared

May 03, 2015 | Samsung CXJ0932 9-Inch ACDC TVVCR Combo

1 Answer

Attach tv converter box


Everything is digital now. You will need a digital converter box. You will connect an antenna to it, and then connect the box to your tv. The box will come with it's own remote. Your tv will be set to channel 3 or 4 (depending on the converter box you get), and you will control the stations with the remote that came with the converter. You can get them at any electronics store.

Jan 09, 2014 | Jensen J53-BWR 5 in. Portable Television

1 Answer

How to fix a sylvania 6413tg that is stuck on one channel


Hello
Your Sylvania 6413TG model is capable of storing 181 channels in its memory; by frequency synthesised tunig process. Just connect external antenna or cable to its antenna socket and make it autotune first. To autotune it, get into 'Menu' select 'Channel set' select 'Auto preset CH' and press 'Vol up' button once. The set will search and memorize all the channels transmitting at that time and will hault an the end and show the first channel received. You can then select your favourite channel by channel select button at the remote control.
If this process is not going on; that is; channel search is OK, but no channels are stored, and the set struck in one channel only. the memory IC inside the TV is faulty and should be replaced. Memory IC can be located very near to the main system control IC, having 8 soldering leads. It can be desoldered and replaced. It will have a number printed on it and should be noted well. This number is very important, and the replacement also must be the same. OK.

Jun 25, 2011 | Sylvania Portable Televisions

1 Answer

The problem with the tv is that it is no longer able to be turned on. i have tried many different outlets and that is clearly not the problem. also, the power system that came with the tv still has a green...


Hello
Connect the TV to external antenna or cable and do the following ot autoscan channels. If it autoscans, and doesn't store any stations in its memory, the memory IC has damaged and should be replaced with same type and number. Wait till autoscan completes and see whether the first channel receve will comes displayed or not. It will take some time to complete. the procedure is:

From Menu Press Vol [+/-] then Channel [UP/DOWN] buttons to find CHANNEL AUTOSCAN.
Press Volume [+/-] button, channels will be scaned automatically. OK

Jan 11, 2011 | Audiovox FPE1505 15" LCD TV Television

1 Answer

LACK OF CODE PORTABLE TV WITH DECK FOR UNIVERSAL REMOTE CONTROL


Hello
Three digit remote code for GE TVs are:-

000/ 003/ 004/ 009/ 022/ 031/ 044/ 052/ 054/ 055/ 087/ 092/ 103/ 107/ 125/ 164/ 181

Four digit universal remote code for GE TVs are:-

0031 0107 0164 0004 0009 0044 0054 0000 0342 0003 0125 0015 0022 0052 0087

Four digit universal remote code for GE TV/VCR Combo is
0342
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.
OK.

Dec 04, 2010 | GE SpaceMaker 05GP009 Television

1 Answer

I have this same model TV and I use it with as


You probably need an RF (radio frquency) modulator to be connected between the cable and the TV. Connect the cable to the ANT IN on the RF modulator and then use the TO TV outlet OR the three RCA outlets (yellow video, red left audio channel, white right video channel) to connect to the Haier portable TV

I bought two such modulators made by TriQuest at a local surplus-type store (i.e. Big Lots) for about ten bucks each.

Incidentally the TriQuest unit also has an S-video output.

Nov 16, 2009 | Haier HLT71 7 in. Portable TV

1 Answer

Sony KV14T1U tuning


Press and hold for a few Seconds the 2nd Button from the left on the front of the TV. The auto tune menu will appear on the bottom right of the screen. Wait until it disappears and then check the channels by using the buttons on the remote.

May 20, 2008 | Portable Televisions

1 Answer

Vason 10.4 inch portable tv tuning problem


I returned my original TV/DVD to the suppliers who then sent me a new one.
I experienced exactly the same tuning problem with the new TV.
The only way I could tune it, was by using the fine tune facility to find and store the missing stations. This took a lot of time and continuous button pushing, so patience is essential.
Once found and stored, the previously missing channels are perfect.
It would appear that the DVD player doesn't like DVD- recordings from my home recorder. If they are re-coded they work.
Anything recorded on DVD+ is fine.
In my opinion this is a good unit let down by a couple of niggling faults.

Feb 08, 2008 | Portable Televisions

1 Answer

Portable Samsung TV - Model No. CB-3312Z - About 17 yrs old.


You need to get a universal remote to switch video options .... some televisions use channel 00 others have video selections on the remote itself....

Jan 08, 2008 | Portable Televisions

2 Answers

Tuning grundig tv - tp623


Using ACP (Auto Channel Programming) Press and keep button P/C pressed for approx 3 sec. ACP and the channel number appear on the screen. Indications in red letters are activated. Press button< YES is activated.
Screen will display SEARCH - STORE YES< > NO
Once you have the channel you want, activate STORE then <YES
This instuction booklet covers P40,P45 and P50 with remote model tp623

Sep 22, 2007 | Portable Televisions

Not finding what you are looking for?
Portable Televisions Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Portable Televisions Experts

Blake

Level 2 Expert

136 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Portable Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...