Question about Alvarion (835108) Wireless Bridge

2 Answers

Manually resetting my Alvarion breeze access indoor units

The power and the WLNK on my Alvarion breezeaccess AU and SU units are going off and coming on all the time.I need to reset the unit and change the channel since one of the causes could be congestion.The thing is that I do not have the IP's of the unit and do not have the cable from the Mon pot to the com port of my PC.I need to manually reset the unit to factory settings so that I can configure it afresh.The question now is how can I manually reset this unit to factory settings as I do not have an insight into the configuration of the units.If I can get some part of the device that I can press to reset,then that would be great.Any suggestions? Thanks, Kahindo

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers
Re: Manually resetting my Alvarion breeze access indoor...

There is NO way of resetiing the device. You need to get hold of the factory reset device program from alvarion. This allows you to connect to the device and run a small program into which you enter the MAC address of the unit. The software then sets the unit back to factory defaults

Posted on Apr 07, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 309 Answers
Re: Manually resetting my Alvarion breeze access indoor...

Sorry mate trying to make heads or tails of what you have written, to get the IP address of the device you need to do this. connect to the device, then click start button, then click run, type CMD and press enter a black screen appears ie dos prompt. type IPCONFIG /ALL then press enter you will get the IP Adress of the device. dont matter if you connect wirelessly or through cable you will get the ipadress.. Hope this is what you mean All the best John

Posted on Mar 08, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have just had added windows xp on my comp but cant access the internet. i have been informed i need the drivers for local area connections can anyone help me where i can download these for free thank you

You can download the device drivers from the Compaq/HP WEBsupport/download page. Make sure
you select your model laptop and the Windowsdrivers you require and install them. Click on this link to download thedrivers: -

Jun 28, 2011 | HP Other Network Devices


How do I reset LinkSys Router Default Password?

When you forget your Linksys router password, you will need to reset it back to the factory defaults. You can restore the router configuration to back to the factory by following the steps outlined below:

1. Hold in the reset button of the router for 30 seconds. 2. Unplug your power cord for 30 seconds 3. Plug back your power cord4. Wait for a few seconds then release the reset button.
NOTE:¨ When holding in the reset button, make sure that you do not release it until you are sure that it has been compressed for at least 30 seconds or more.

¨ This procedure resets the router back to all its factory default settings thus apart from affecting your username and password, it will also affect your configuration and IP addressing.

Once this is complete, you can now login and reconfigure your password. To do this:

1. Connect a PC to one of the Linksys router Ethernet ports

2. Open your web browser and go to the URL This will take you to a web page with a popup box which asks you to enter a username and password to login required to login to your router

3. On older LinkSys routers, the username is set to blank and the password is set to "admin" (without the quotes). On newer Linksys routers, both the default username and the default password are set to "admin".

4. Click on login. You have logged in to the Administrator account and are now able to access and change a number of configuration options for your router.

5. Click on management tab then change your administrator password to any password that you like. Remember to choose a strong password that others cannot guess but that will be easy enough for you to remember.

6. You can also choose to reconfigure other aspects of you Linksys router at this point.

on Nov 25, 2010 | Other Network Devices

1 Answer

How do i reset password for Alvarion BreezeCOM BreezeACCESS 2.4 Indoor Subscriber Unit Bridge/Router

There is NO way of resetiing the device. You need to get hold of the factory reset device program from alvarion. This allows you to connect to the device and run a small program into which you enter the MAC address of the unit. The software then sets the unit back to factory defaults. You will need to run this program by connecting a cat 5 cable to each of the units you wish to reset and entering the MAC address listed on the device.

Cheers - Chris (Ex trainer of Alvarion Installation engineers)

Mar 15, 2011 | Alvarion BreezeCOM BreezeACCESS 2.4...

1 Answer

We are currently installing wireless cctv and using alvarion access.We are encountering connection lost and sometimes got still pictures.What causes this problem? Thanks,

is it a PTZ camera or Fix? how many cameras? You need to look at the type of capacity (MBPS) & (PPS) , minimum latency and Jitter your camera manufacturre is recommending. Not all wireless devices offer low latency, Low Jitter, High MBPS and PPS needed for higher end cameras.

Feb 22, 2011 | Alvarion Other Network Devices

1 Answer

Bought a new PAP2T phone adaptor. When I plug it the power light goes red and blinking. I can not access the admin

try to unplug it for atleast five minutes then plug it again.
if its still doesn't work.

try to do this steps to reset the unit:

Dec 01, 2010 | Linksys PAP2T

1 Answer

Hello, I have a PAP2 working fine until a day the power remain redlight. No more access via FTP none by plugging directly a phone. My PAP2 is dead ? I read a lot of forum without solution. Thanks EXPERT

unplug the unit for atleast 5 mins.then plug it again.
if its still doesn't work try to do this steps to reset in again in factory default.

Nov 17, 2010 | Linksys PAP2T

2 Answers

Access server manager 3.6

The DECserver 732 is a high-density, high-performance asynchronous device and remote access server that provides 32 MJ8 (RJ45) serial ports. The DECserver 732's serial ports support either of two sets of software-selectable four-signal modem control signals. The DECserver 732 has AUI and 10BaseT Ethernet connectors. The DECserver 700-16 supports up to eight sessions per port and speeds up to 115.2 Kb/s per port. The DECserver 732 has an external FLASH socket for the customer-installable flashcard. When installed, the flashcard allows self-booting operation. The DECserver 732 runs DECserver Network Access Software (DNAS), which delivers multi-protocol support for TCP/IP, IPX, and AppleTalk networks. DECserver 700 units are designed for tabletop or rackmount configuration

the u need to check these site for more info:

Jan 05, 2010 | Digital Products Digital DECserver 732...

1 Answer

External Antenna

First, try changing the channel your access point (AP) is using. Maybe there is some interference with another AP or with an electronic appliance such as a wireless phone. Try all available channel. While changing your channel number, make sure that the wi-fi power of your access point is set to the maximum available (100%).

Second, make sure that there is as less metal as possible around the AP, for example if the AP is sitting in a metal book case or on a metal shelf.

Third, some appartment buildings, expecially old ones, have very thick walls made of concrete or brick. This is a nightmare for wi-fi. Try bringing the AP to a more central point in your appartment, if possible (I know this may be complicated).

May 26, 2008 | Other Network Devices

2 Answers

My ip address need reset

to reset your ip address simply unplug your modem and router, turn off the computer, turn on the computer with out pluging the router and modem back in, turn the computer off , plug the router and modem in wait for the lights to come on and then turn your computer on.

May 14, 2008 | Black Box IP Address Translator With...

1 Answer

Sony SNT-V704

If your unit keeps crashing this could be a sign of over heating. There is a way to test if it is an overheating issue and that is as the unit is playing use a hot air gun to raise the temperature and trigger the problem once the bad component is found replace it.

Sep 12, 2007 | Sony SNT-V704 (SNTV704) Video Server

Not finding what you are looking for?
Alvarion (835108) Wireless Bridge Logo

Related Topics:

2,122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alvarion Other Network Devices Experts


Level 3 Expert

18258 Answers


Level 3 Expert

1038 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers

Are you an Alvarion Other Network Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides