Question about Samsung HLN5065W 50" Rear Projection HDTV-Ready Television

1 Answer

Colours split and vertical bowed green line at to and bottom of s

Colours split and vertical bowed green line at top and bottom of screen...
please help

Posted by on

  • jason May 11, 2010

    can you do the repair ? or are you going to need a repair shop?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

This is a convergence problem that can be either poor solder connections at the convergence ICs or defective ICs. If you can solder and feel comfortable working inside the set where there are potentially dangerous high voltages, update this and further details and instructions will be provided.

Thanks,
Dan

Posted on Dec 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 52" RCA P52937SG screen bows on the top and on


What you are describing can be due to a number of different settings.

Focus on the red and green guns
Sharpness on the red and green guns
Horizontal position and size
Vertical position and size.

Please consult a professional for adjustment on these items as they are all near or connect to parts that have Hazardous Voltage.

Mar 22, 2011 | RCA P52937 52" Rear Projection Television

1 Answer

RCA Projection TV Model #p46921, Has bowing effect of pictures


Go to Menu then setup look for convergence if you do not see convergence on menu then you have a open FUSE FL231 it is on right side of FBT flyback transfomer there is 3 of them small brown rectrangler looking caps it will be the one in the Middle.

Jan 31, 2009 | RCA R52WH73 Projection Television

1 Answer

Pt-47wx49e convergence problem


I just replaced the 2 convergance chips, but it did not seem to fix the problem. I then tested all the resistors that feed the convergence chips anf there was a 2.2 ohm fusable blown. IT was R7050 on mine. That seemed to fix it so that I could adjust all the colors through the convergence 2 screen. There seems to be a slight bow near the bottom when you look at the c2 screen, but not noticable when you are watching a picture. Since I got this broken, I am not sure how perfect it should be.

If anyone can send me the service manual, I would appretiate it. Thanks.

Oct 10, 2008 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Philips 50P8341 green light


I believe its the vertical output IC. Diodes would tend to blow fuses . I would replace the vertical output and see if that takes care of the problem.

Aug 20, 2008 | Philips 50P8341 50" Rear Projection...

1 Answer

Tv is messed up


I got a question.

Do you have any stereo speakers anywhere near your television?

This sounds like something a magnetic field could cause from speakers being too close to the tv.

If so try to relocate them and see if the problem goes away.

Jun 15, 2008 | Hitachi 57SWX20B 57" Rear Projection...

1 Answer

Mitsubishi Vs-6047 Convergence Problem...Please Help!


usally convergence green is split between 2 ics. so if your blue and red are still good. it might be the green output resistors. The

Jan 08, 2008 | Mitsubishi VS-6047 60" Rear Projection...

1 Answer

Sony kp-46s4u


look in hte convergence circuit for opened reistors.

Oct 11, 2007 | Sony KP-41T65 41" Rear Projection...

2 Answers

Toshiba 42h81


Hello, one of possible solutions is to replace capacitors (10uF/50V) on HYPER (PD0246) module. Please ask the tech to check/replace them. If you need more info please advice.

Apr 27, 2007 | Toshiba 42H81 42" Rear Projection...

1 Answer

Weird problem not convergence


Mine is doing the exact same thing! have you found a fix yet?

Apr 23, 2007 | JVC AV-48WP74 48" Rear Projection...

Not finding what you are looking for?
Samsung HLN5065W 50" Rear Projection HDTV-Ready Television Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69795 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

cce772000

Level 1 Expert

7 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...