Question about Nikada LA1371 Television

1 Answer

LCD provides a light glow only

I have a Nikada LA1371 that when you power on only has a slight glow of the LCD with no visible image not even the menu screen. I tried the flashlight test to see if it is simply a backlight issue but that didn't work. Anyone have any thoughts or suggestions ? Thanks

Posted by on

  • Rob Cerroni Mar 21, 2007

    So would I still get a glow from the LCD if the power board is bad? (I'm not getting sound by the way)


  • Rob Cerroni Mar 22, 2007

    No menu or any other image at all - just a very dim.



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 67 Answers

Sounds like an digital board problem or image board or main board all the same board just different names if u get sound that is, if no sound too then its probably the signal board aka power board

Posted on Mar 21, 2007

  • Jay Wick Mar 22, 2007

    yea if your getting nothing at all like the set doesnt even power on then the power board if it does though then it might be the signal board sounds more like a signal board if u have a glow to the tv can u bring up the menu on the tv remote?



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Digital photo frame has gone blank, no light of any sort. is this fixable?....frank


Sure it cab be fixed. but first of all do you see your image even without the light as the tube is not glowing? if yes then try to change it with all White LEDs as the white LEDs are available in form of strips now a days. You can uses this to make the LCD glow once applied power to the LEDs they workout cheap and also very less power consumption.


Jun 30, 2011 | Computers & Internet

1 Answer

Hello my n71s has been lit white screen and no menu buttons work, I can turn off. I tested on other computers and with various resolutions even in safe mode, help

The screen has white glow and no images means that the LCD controller board (part of the LCD panel) is not getting the 5vdc power feeding it from the logic board through the ribbon cable, it is either the cable came lose or dirty contacts, or failed 5V switching transistor for the LCD controller is bad, or blown fuse on the LCD controller board. See pictures here:

Look at the LCD panel album.

Mar 30, 2010 | Hyundai Electronics ImageQuest N71S 17"...

1 Answer

Will not turn on

Unplug Set, wait 10 seconds, plug it back in and try again, works for me.

May 10, 2009 | Nikada LA1371 Television

1 Answer

Sony Bravia 46S2010 no picture only glows but, only sound on

sound like you had problem with the lcd display panel. The Tcon had problem that attack to the panel.

Mar 07, 2009 | Sony BRAVIA KDL-40S2000 40 in. LCD HDTV

1 Answer

Sony Bravia KDL-S40A12U Blank screen


on your set there is inverter board that is what lights up th backlight on your TV making everything visible that board has went bad.


Jul 27, 2008 | Sony BRAVIA KDL-40S2000 40 in. LCD HDTV

1 Answer

Blank screen, cannot get menu to display, but sound works

Does the lcd screen have a glow to it ? Or is it really dim if u get real close to screen u can see images moving ?
it it has a glow to it you panel lighting is fine but you control board is bad. If you have a dark screen and see faint images you panel back lighting is out u can check the power with a meter at the connection to inverter board on panel.

May 03, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikada Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75032 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5306 Answers

Are you a Nikada Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides