Question about SanDisk Sansa m240 MP3 Player

1 Answer

The recorder???? how to use the recorder??? turn it on and stop it thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 944 Answers
Re: the recorder????

Find the user guide at: page 19 onwards especially. Hope this helps :)

Posted on Mar 07, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to do voice recording

Turn on your iRiver device.
hold the center button in until you see the screen is at the FM, Recording, Browse or Settings. These are accessable by left and right directions.
Once you are at the Recording option, quick tap the center button. And then press the record button on the top of the device. The Stop/Play, A-B buttons are also on top next to the record button.
You may need to be sure the headphones are disconnected.
hope this info is useful.

Feb 07, 2013 | iRiver T10 MP3 Player

1 Answer

I have a Zoom sb-246 beat kit and i had it for a while...but havent used it in months so i turn it on and when it does its stuck on the coming on screen and stops at the screen sayin sb-246 and thats...

Greetings, I too have experienced the exact same problem & for over two years, hadn't found and answer or solution until this month August 2024.
Be of good cheer, to answer your question is quite simple.
While your ZOOM SB 246 is off: press the record button.
While holding the record button down, turn on the power .
In your display, you will see the word: ALLINIT flashing.
Press your record button a second time & the word COMPLETE will be in your display .
Thus indicating that you ZOOM SB 246 has been restored to its factory settings.
My SB 246 did the same thing but I refused to get rid or pay a repairman to take a look at my drum machine.
It paid off.
Give thanks & praise.
Pass it on.

Aug 11, 2011 | MP3 & Digital Media Players

1 Answer

Okaay , so my mp3 just stop working it dosent turn all at all I was recording a song on the radio which you can do with my rca m4304-A mp3 can do and i have to press the power button so it can stop...


When the M4304 keeps shutting off all the time, you did well by trying to charge the player: 3 hours of charging the battery, with the player connected to a running computer, should be long enough to charge to full capacity.
1. Check the HOLD switch ( ) on the rear: move the switch away from the padlock sign.
2. RESET the player: hold the Menu button ( ) for more than 10 seconds.

672907e.jpg 3. If the player doesn't work normally after the RESET: perform a firmware UPDATE. For details, see next link:

Jul 20, 2010 | RCA M4304 Digital Media Player

1 Answer

How to turn it off???

Make sure the device has stopped recording or playing by pressing the stop button. Then slide the hold switch to "hold" and the device will turn off in about 6 seconds.

Mar 11, 2010 | Sony ICDUX70S MP3 Player

1 Answer

Mp3 wont turn on...

Press the Reset button then try charging it and if it doesn't begin to charge then take it to Radio shack.

Jul 28, 2009 | SanDisk Sansa m250 MP3 Player

1 Answer

I an trying to use the voice recorder on my iHP-120

Press and hold button on left side with red dot (record)... You will see "stand by"...  Press the lowest button on right side (A-B) over and over until "source" is "int Mic"... when you are ready to record, press the left button w/ the red dot short and quick... recording will begin.  When youre ready to stop recording, press middle button (pic of square on it) on right side... that will stop it.
To find your recording, look in the "record" folder under "Audio" 

Mar 10, 2009 | iRiver iHP-120 MP3 Player

2 Answers

Won't stop recording

Turn on your mp3 player and take out the battery while it's turned on. It worked when I did that and I hope it helps you as well.

Sep 12, 2008 | SanDisk Sansa c250 (2 GB) MP3 Player...

6 Answers

Refresh database SansaDisk e270

Sorry, no habla espanol. Run the recovery tool from the SanDisk website. Make sure you select "format" when prompted. You need to put the device into "recovery mode" before you run the tool. - Turn the device off (hold power for 20 seconds) - Slide the hold switch into "hold" position. - Press and hold the "record" button while connecting it to your computer. Keep holding the "record" button until you see the "new hardware found" on your computer. Then run the recovery tool. Select format when prompted. Best of Luck.

Sep 10, 2007 | SanDisk Sansa e200 MP3 Player

1 Answer

Record from FM

If you press the play button while in FM mode it will start to record then press stop to stop.

Jun 13, 2007 | iLO (2 GB) MP3 Player

Not finding what you are looking for?
SanDisk Sansa m240 MP3 Player Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk MP3 & Digital Media Players Experts


Level 3 Expert

93861 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a SanDisk MP3 and Digital Media Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides