Question about Computer Expressions RoboDog WebCam 65055

1 Answer

Web cam i bought a new computer with web cam. i do not know how to connect to the outside world using the web cam.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Download and install Skype. Its free and works great. Here is info on setting up Audio & Video settings after installation.

Normal 0 Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jan 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gateway webcam


Dear Tori,
Greetings from New Zealand! You have not supplied much info - so we'll start from the beginning...SAFELY Remove web-cam connection - (I presume it is a USB connection?) - by R-clicking on the little icon - usally green - in the systray by the clock, & following instructions. Have you installed the web-cam "driver" software from the cd that came with the web-cam? If not then do so. Plug in web-cam USB & wait until pop-ups notify you that web-cam device is detected & ready to use. L-Click on "START" > All Programs > Web-cam program.
If this option does not work/is not available, then OPEN "My Computer" & click on web-cam icon. This should start web-cam software & you SHOULD see your smiling face on screen!
If Nothing works - then you will have to make a note of the model & contact Gateway for support.
I hope that this helps! GBU! - Bruce.

Apr 28, 2013 | Gateway Computers & Internet

1 Answer

I have a web cam but i can not make it work on my computer... i need to instal somthing to my combuter but how? i been looking for websits but nothing, and i have heard that there is a free instal to...


Well the same thing happend to me. they told me that the Web cam was Faulty so i bought a new one and It Workd
So you'r web cam is probaly faulty

Feb 13, 2010 | Creative Labs WebCam Live!

1 Answer

I dont know how to set up my web cam


To set up web cam you need driver cd. Place it in dvd/cd drive. Now connect web cam to working usb port. Then computer will notice you that it found new device and searches driver of it .install it from cd drive now you can run web cam in your computer.

Nov 03, 2009 | Microsoft Windows Vista Ultimate Edition

1 Answer

Web cam is not active


CHECK THE FOLLOWING AREA TO HELP RESOLVE A PROBLEM.

INSTALLING AS A NEW DEVICE
DEVICE MANAGER
NETWORKING AND SHARING
PROBLEM REPORTS
SECURITY CENTER
SYNC CENTER IF YOU HAVE ONE
WINDOWS DEFENDER
WINDOWS FIREWALL

WINDOWS DEFENDER AND WINDOWS FIREWALL ARE GOING TO BE THE PROBLEM AREAS TO ACCESS THE OUTSIDE WORLD WITH THE WEB CAM. TRY JUST DISABILING FOR A FEW MINUTES AND TRY GETTING IT TO WORK SLOWLY TURN ONE ITEM AT A TIME ON UNTIL YOU FIND THE ONE CAUSING YOU ALL THE PROBLEMS LEAVE IT OFF UNTIL YOU HAVE TIME TO RESOLVE THE CONFLICT ISSUES

ROD
IF YOU NEED MORE HELP YOU MAY CONTACT ME THREW THE WEB SITE AT
RODGANDYSR@GMAIL

May 12, 2009 | Dell Inspiron 1521 Laptop

1 Answer

Samsung l100 silver can be used as web cam?


this particulat model cannot be used as a web cam, when you connect it to your computer it is detected as a removable device not an imaging device

hope this helps

Dec 25, 2008 | Samsung L100 Digital Camera

3 Answers

Gigaware pc camera with mic


i have a gigaware webcam and no matter how i try to install it with the CD it is not connecting

Aug 30, 2008 | Computers & Internet

2 Answers

C-813 Kodak EasyShare Camera


need help find disc 4 my cam 240x dvd cam

Jul 11, 2008 | Cameras

1 Answer

How do you get the 1.3 megapixel web cam to work


If you bought a new 1.3 mega web cam with that a driver cd is available. If you have the driver cd install it first. here is install steps.
  1. unplug the web cam if you connected to the system
  2. Put the web cam driver cd into the cd drive and install the driver software.
  3. In the installation it will ask you to connect the web cam to the system and connect it (Only it ask to connect)
  4. After that you can see the image on the web cam software.
  5. Adjust the lens which is comfortable to see.
These are intial steps to work the web cam just try it and inform me if you get any other thing

Apr 28, 2008 | Computers & Internet

1 Answer

Can't set up my web cam i need some help


Do you know the model number of your web cam? Is the computer detect a new hardware as you attach the webcam? disconnect first your webcam from PC. If you have CD utilities enclosed when you bought your webcam, then insert the disc in CD/DVD rom and install the driver.( If CD utilities not enclosed, That's the time that you force to go online. go to the website where your webcam make. search driver by inputting your cam model number. download the driver and install. ) after installing the driver, connect your cam and then let the PC Identify it. system will setup it for you.

Dec 14, 2007 | Microsoft Office Outlook 2003 for PC

Not finding what you are looking for?
Computer Expressions RoboDog WebCam 65055 Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computer Expressions Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer Expressions Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...