Question about Xerox Phaser 6350DP Laser Printer

1 Answer

I have a XEROX 6350 and it will not print any black. Ken

Posted by on

  • mburbee Jan 29, 2009

    Prints every color fine, except black. It comes out grey.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

LSU Defect.

Posted on Dec 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Xerox 6350 pages all come out pink


Had a Dell do something similar. Never did find out what the problem was, just would come and go. I'd try pulling out all removable parts (toners, drums, fuser (after it cools), etc, then reseat it all. Or sned back for warranty if possible.

Dec 04, 2013 | Xerox Phaser 6350/YDP Laser Printer

1 Answer

Xerox 6350 prints to much magenta


is it also when you print blank pages after the 25-50 pages? if so it could be the fuser, if not it could be the imaging unit. Check your magenta imaging unit and fuser roller anyway. If any of them is dirty, replace them.

Dec 02, 2013 | Xerox Phaser 6350/YDT Laser Printer

1 Answer

Just after putting all new toner cartridges, fuser and transfer roller, my Xerox Phaser 6350 now won't print, and the LCD is completely blank.


Could be the Main Formatter board....Are you still getting power?....if you are the main formatter board is most likely the problem....If everything starts up and sounds normal to ready..and you just don't see anything on the screen your control panel is bad....You can call the guys at www.getthatpart.com who have these parts. These guys know their stuff and sell everything for the 6350 from used working units....so you get the parts for half the cost of new. They also have phone number so you can talk to a real person who can help!

Oct 19, 2010 | Xerox Phaser 6350/YDT Laser Printer

1 Answer

Trying to install a new mpt (shootout) assembly for the xerox phaser 6350. Is there a manual/diagram somewhere that I can refer to? Thanks!


Here is a link to the complete service manual for the xerox phaser 6350 it has full diagrams and step by step detailed instructions for every part of the printer
http://www.scribd.com/doc/42787465/XEROX-Phaser-6300-6350-6360-Parts-List-Service-Manual

Hope this helps

Mar 23, 2010 | Xerox Phaser 6350DP Laser Printer

1 Answer

Xerox phaser 6350 has stopped printing on two sides. Have document which did print correctly two weeks ago, now does not.


you need to change the settings again on the printer driver itself:) when printing choose the printer and the settings under printer properties

Nov 20, 2009 | Xerox Phaser 6350/YDT Laser Printer

1 Answer

Xerox 6350 prints ghost page every page printed. It is printing a ghost imge of the previous document printed on every page.


If the ghost is black then you might have a bad Black Developer 116-2011-00

If the ghost is in all colors then it may be your fuser, or possibly just your paper settings. (If you are using glossy paper or card stock this needs to be fed from the MPT tray and defined correctly in the control panel)

Good luck!

Whit
Item, Inc.

Oct 13, 2009 | Xerox Phaser 6350/YDT Laser Printer

1 Answer

Xerox phaser 6350dp magenta flooding


Your Magenta developers are probably failing. Order 116-2009-00 and see if that fixes it.
Whit
Item, Inc.

Jun 15, 2009 | Xerox Phaser 6350/YDP Laser Printer

1 Answer

Black printing is very dull but colors are bright in Phaser 6130


I have the same problem with a 6350 Phaser. Did you get it fixed?

Jun 11, 2009 | Xerox Phaser 6130 Laser Printer

1 Answer

Xerox Phaser 6350 printer freezes up and restarts by itself.


Hi dpluu:
Try this procedure:
Engine Test Print
Isolate printer hardware problems to either the Engine Control or Image Processor
Board by running the Engine Test print. If the print is successfully printed, focus on
the Image Processor Board or its components (RAM, Hard Drive, Configuration
Card, etc.). If the print fails, refer to Section 4 for print engine troubleshooting help.
1. Press the Test Print button located on the Rear Panel.
2. The printer prints the 600 x 600 test print unless an error status from the Engine Control Board is present. The test button is in the back of the printer and say's Test Print.

Hope this helps

May 22, 2009 | Xerox Phaser 6350/YDT Laser Printer

Not finding what you are looking for?
Xerox Phaser 6350DP Laser Printer Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Printers & Copiers Experts

Whit
Whit

Level 1 Expert

185 Answers

iteminconline

Level 2 Expert

110 Answers

Philip Hughes

Level 2 Expert

63 Answers

Are you a Xerox Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...