Question about Sanyo DRW1000 DVD Video Recorder

1 Answer

Retune video recorder

MY sanyo video recorder only records from some of the available stations.
How do I retune it to receive all the available stations?
Many thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,653 Answers

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit
http://tvretune.co.uk/productmanuals

Posted on Oct 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Logik recorder - error message - cannot schedule recording, there is already a timer at the same time on this channel. turned the box off at the wall & retuned. Any suggestions? Thank you. x


check programmed recordings you will have a clash possibly in time and date on another channel. If the dvd records two channels at once normally check if it has two channels already set up at the same time to record i the scheduled recordings.
you may have two different channel positions that are the same tv station and have set up two different channels to record the same show. and then you may be trying to record another different channel at the same time. check and delete extra channel schedule.

Another way to have this is as an example say programmed record at channel nine f0r show 1 at 7:30 to 8.35 day xyz and then you set up show 2 to record at channel nine say from 8:30 to 9.35.day xyz this will use two time frames during the overlap from 8:30 to 8:35 on day xyz and if you decide to record a third show you can't between the overlap time frame

Jun 25, 2016 | DVD & Blu-Ray Players

1 Answer

The recorder is 10 years old. All appears to work OK. But on retuning the stations it finds none. Is this because we have moved over to digital and the recorder has an analogue tuner? any fixes?


Hi I have a Panasonic DVD recorder analogue u can connect a digital set top box just tune in the box & set you're input on recorder cheers

Mar 03, 2016 | DVD & Blu-Ray Players

1 Answer

Trying to connect Magnavox MWR 10D6 DVD/Recorder to Sanyo HDTV. TV is connected to Dish network through coax. cable.


Unfortunately, the Magnavox MWR10D6 recorder can not record HD signals. It's only video inputs are coax (RF) and composite video; both are limited to 480i (SD). NTSC (analog signals) are translated to video.

Your best recording option is to connect the composite video output of the Dish receiver to the video input (yellow for video, red and white for audio) of the recorder. Then set the receiver to the channel that you want to record and set the recorder to Line In.

HD recorders may exist. They are much more expensive than the SD versions.

I wish that I had better news for you. The manual for the MWR10D6 is available from Funai here: http://www.funai-corp.com/support/om/MWR10D6.pdf .

Cindy Wells

Apr 18, 2013 | Philips Magnavox MWR10D6 DVD Recorder

1 Answer

I have tried tuning in my dvd recorder in the reset menu, but after the scan process a message appears "Check aerial connection. Help, what am I doing wrong?


make sure aerial is in dvd recorder press functions move down to others press enter move down to setup and enter highlight tuning move right and down to auto setup reset and enter
tou will see a warning message move to yes and enter the dvd recorder will start tuning and a list of all the stations that been found will be displayed after that it will start to scan for analog stations( BEEN TURNED OFF) once finished
picture will be displayed
if no list was seen when tuning in digital stations then make sure dvd is digital
and to check aerial put direct in to didgtal tv and retune tv

Dec 16, 2009 | Panasonic DMR-ES10 DVD Recorder

1 Answer

Have lost chanel 5 and others on my panasonic dvd recorder since national retune.How do i retune my dvd recorder?


It seems others have had this problem too, but there seems to be a generic solution to it. Unplug the device from the mains and leave it without power for a few minutes. Then, reconnect your device. That should solve your problem.

Back to your question about retuning it, you have to hold the channel up and channel down buttons at the same time for a few seconds. Auto-setup should start.

Hope that helps,

Thomas

Oct 10, 2009 | Panasonic DMR-EH60 DVD Recorder/HDD...

1 Answer

Can not get any digital progams now that I have retuned my panasonic dmr-ex75eb dvd recorder. Am not receiving any digital signals


You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

Sep 30, 2009 | Panasonic DMR-EX75EB-S DVD Recorder/HDD...

1 Answer

I have auto retuned my recorder as per instructions today and now I cannot recive channel 5 at all


You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit
http://tvretune.co.uk/productmanuals

Sep 30, 2009 | Panasonic DMR-EX75EB-S DVD Recorder/HDD...

1 Answer

Changing Channels


Unfortunately, no. The tuner in your DVD recorder works differently than how your satellite receiver works. You *must* use the satellite receiver to select the active channel, and then send that channel to one of the inputs on your recorder. You can then record that channel. Unless your satellite receiver is has "dual tuners" in it, you are stuck watching the same channel that the DVD recorder is recording. If your goal is primarily time-shifting of shows (as opposed to archiving shows forever to DVD), you might consider getting a different satellite receiver with a built-in DVR (hard disk recorder). These allow you to mark shows in advance, have them recorded to the hard drive, and then you can watch them whenever you want, skipping all the commercials. You also get the ability to pause and rewind live TV.

Apr 14, 2007 | Panasonic DMR-E50 DVD Recorder

Not finding what you are looking for?
DVD & Blu-Ray Players Logo

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo DVD & Blu-Ray Players Experts

The Knight
The Knight

Level 3 Expert

68323 Answers

yadayada
yadayada

Level 3 Expert

61136 Answers

David Payne
David Payne

Level 3 Expert

13437 Answers

Are you a Sanyo DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...