Question about Uniden BC60XLT Handheld Scanner

1 Answer

I CAN'T GET MY FREQUENCIES IN MY SCANNER

I can not enter 7 digit frenquencies.

Posted by on

  • 1 more comment 
  • cowboysmommi Dec 11, 2008

    please e-mail me if you get one thank you

  • ccronan633 Feb 17, 2009

    I can't enter any freq. Entering results in an "E" display and the new freq is not entered. I suspect that may be a dead function. There are existing channels that are active. (not a 5, 6, 7 digit problem - nothing is accepted)

  • Dean Pitts
    Dean Pitts May 11, 2010

    I was just working with one of these scanners 2 days ago. Is the radio not working right, or do you need the instructions on how to program it? Please let me know.


    Rollin Cbs

    Dean

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 120 Answers

Just round them off to 6 digits

Posted on Jan 02, 2009

  • rah1379 Jan 02, 2009

    just round them off to 6 digits

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tried programming 7 digit frequency but scanner wont accept it-any solutions - Deo


The scanner rounds off frequencies to six digits so if, for example you are programming a frequency with a 5 on the end drop it and the scanner will store it

Sep 24, 2012 | Radio Communications

1 Answer

I have a pro 97 and want to discard one of the channels I previously entered. How do I delete it. Also how do I find and enter new frequencies that are digital?


This is the Manual for your scanner http://www.radioshack.com/graphics/uc/rsk/Support/ProductManuals/2000527_PM_EN.pdf

As for the Digital frequencies. You will need to replace your scanner with a digital scanner like the Uniden BCD 396 XT or a GRE series scanner in order to listen to the digital channels. you can find out more information at http://www.radioreference.com

Jul 16, 2011 | Radio Shack Pro-97 Handheld Scanner

1 Answer

Regency R1077 base scanner can not delete old frequencies to reprogram scanner


Press "Manual", then press digit key ("0/10" thru "9") that corresponds with the channel to be changed ("0/10" = ch10). Next, press the digit and decimal point keys to enter the frequency in megahertz (Mhz) to be stored in the channel. To store 453.100 Mhz in channel 2, you would press "Manual", then "2". Press the following keys in order: "4" "5" "3" "." "1" "0" "0", followed by pressing the "Enter" key. Repeat this process for up to 10 channels.If you wish to clear unused channels, you should be able to select the channel, then enter "." followed by the "Enter" key.

This scanner will only accept frequencies between 30.000Mhz and 599.999 Mhz. Attempting to input frequencies outside this range will result in an error message.

I hope this helps and good luck! Please rate my reply. Thanks.

Jul 11, 2011 | Radio Shack Pro-96 Scanner

1 Answer

I cant seem to be able to program a frequencies into my scanner. I have a list of local frequencies but the numbers are to large to enter into the scanner to accept. it only holds up to six numbers but...


Frequencies in the range you mention may be part of a trunked system that your scanner cannot follow, but you can still enter and monitor the frequency. Yes, your BC340CRS will handle frequencies with up to five decimal places, as long as the last two digits are 25, 50, 0r 75 (see page 16 of the BC340CRS Owner's Manual). The best programming instructions for your scanner are also in that manual. If you don't have a copy, you can download and print it, at no cost, here:
http://www.uniden.com/pdf/BC340CRSom.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com

Bill B.
Listening in since the 60's

Mar 01, 2011 | Uniden BC340CRS Base Scanner

1 Answer

How do you find someone to program a Bearcat scanner?


The 370 is a straightforward scanner and fairly simple to set up, and you should be able to program it yourself with no problems.

Your first step is to make a list of the frequencies that you want to program. Your scanner has the capacity to hold up to 300 frequencies, so you should probably write out a list or type it up in your computer. There's an area in the scanner operating manual for listing your frequencies, but it doesn't have space for you to list the users. You can find a comprehensive database of active frequencies in your area by visiting:

www.RadioReference.com

Once you have your list,
1. Power the scanner ON.
2. Press the E/PGM key to enter the programming mode.
3. If the displayed channel is not the one you want to program, enter the desired channel number and then press HOLD.
4. Enter the desired frequency - including the decimal point.
5. Press E/PGM to enter your data into the scanner's memory.
6. To program the next channel, press the UP or DOWN arrow key, and then start again with step 4 above.
7. To exit the programming mode, press the HOLD and SCAN keys.

The scanner operating manual contains more detailed programming instructions, along with information on how to use features like SEARCH, Weather Alerts, and Band Search. If you don't already have a copy of the manual, you can download and print it here:

http://www.uniden.com/pdf/BC370CRSom.pdf

If you run into any problems while programming, just let us know.

Bill B



Jul 01, 2010 | Uniden BC370CRS Base Scanner

1 Answer

I cant get a good connection on my scanner how can i put codes into it? i am in eureka ca and i need police frenquency codes


You can find a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, here:

www.RadioReference.com

Need the manual for your scanner? You can download and print it here:

http://www.uniden.com/pdf/BC350Com.pdf\

Bill B

Jun 07, 2010 | Uniden BC350C Base Scanner

2 Answers

I can not get any police on my scanner at all every frenq i try dont work, i realy want to get the right frenquency for my city it is sarnia ontario canada i tryed so many no one can help me so i hope some...


Find the frequency you want at Radiofreq.com or RadioReference.com To program your scanner,press manual,enter the channel,press manual,enter the frequency including the decimal point,press E. If you make a mistake,press CLR to erase

Mar 22, 2010 | Uniden Nascar BC-92T Scanner

1 Answer

How do I program conventional frequencies into my Uniden BC898T? I have Motorola TypeII Digital Tunking frequencies programed into Bank A and EDAC Digital Trunking frequencies programed into Bank B


Just go to Bank C or anything after that and start entering -- one channel, one frequency. It's kind of cumbersome to do by pushing the keys, but it works. An alternative is to use the BuTel software. It will simplify programming and give you Virtual Control of the scanner through your computer.

If this helps, please give us a rating. A "very helpful" would be greatly appreciated.

Nov 22, 2009 | Uniden BC898T Base Scanner

1 Answer

All channels locked on my radio shack pro-95 scanner


You are pressing the "scan" button in the upper left hand position and getting all channels locked out? Correct?
If you haven't programmed any frequencies the channels will stay locked out. Get your local frequencies by doing a search for police scanner frequencies. Once you have gotten the information for your area press the "PGM" button on the lower right hand side of the key pad. Input your 1st frequency ###.#### then press "ENTER". Press "PGM"key again and enter your 2nd frequency then "ENTER" again. Repeat as often as you wish to enter more frequencies.
Make sure you are entering your frequencies in empty channels unless you want to over write one that you don't want to use any longer. Press "PGM" until you get to an empty channel.
When you are done, (you can stop any time) press the "SCAN" button in the upper left hand position and you are in business. You are supposed to be able to choose which memory position you wish to use but I haven't tried to figure that one out.
If you need the manual for the radio go to radioshack site and do a search for PRO95 and it will come up in PDF format.
Hope this helps. I have owned the pro 95 for maybe 6 or 7 years and after doing a little programming yesterday the thing is much more to my liking. It scanns quicker and scans the channels I wish to listen to.

Jun 08, 2009 | Radio Shack Pro-95 Handheld Scanner

1 Answer

Scanning


The problem could be your location, altitude, antenna, or wrong frequencies for your area. Here's a link to Radio Reference where you can check their database for active frequencies in your area.

http://www.radioreference.com/apps/db/

Jun 18, 2008 | Radio Shack Pro-94 Scanner

Not finding what you are looking for?
Uniden BC60XLT Handheld Scanner Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Radio Communications Experts

Iron
Iron

Level 3 Expert

3018 Answers

Robert McClure

Level 2 Expert

160 Answers

John
John

Level 2 Expert

473 Answers

Are you an Uniden Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...