Question about Pioneer AVIC-D1 In-Dash Mobile Navigation CD Car Video Player

Open Question

How to get the navigation working on my dvd player

I own a silvercrest cdv 710 car stereo in the menu it shows the navigation icon in grey and also the tv icon in grey i would like to have the navigation working how can this be turned on.when i put the sd card in it recognises it as garmin but wont allow any further,any help on this would be greatly appreciated thanx


Posted by on

  • Anonymous Jan 08, 2009

    i have the same problem have you sorted it yet??


4 Suggested Answers

hogan doan
  • 227 Answers

SOURCE: let my dvd player work

Have you or have someone bench tested it before installation? It is much easier to diagnose for problem when you bench test.

Posted on Mar 05, 2008

  • 1 Answer

SOURCE: touch screen not working

I'm sending my cdv-710 for repair, after 6 months of ownership.

Posted on May 11, 2008

  • 1 Answer


hi the reason there is no picture i because its on safety mode, it is illegal to watch or play a dvd while driving. how to solve this problem is as follows,

1. find the wire that is supposed to connect to the hand brake. the wire will be named safety wire or parking or something similar.

once found , connect it to a black ground wire or bare metal.

simple as that, there should now be a picture but remember it is illegal to watch or play a dvd or music video whole driving. ;)

Posted on May 14, 2009

  • 1868 Answers

SOURCE: colour codes for 83 corona, wiring stereo the

Hello! I'm having a hard time reading your colors...So, I'll give you the 1983 Corona wiring...


Constant +12= Blue/Yellow Switched +12= Gray
Ground= Brown Antenna= Black/Red
Illumination= Green


FR+ Light Green
FR- Blue
FL+ Pink
FL- Purple
RR+ Red
RR- White
RL+ Black
RL- Yellow


Posted on May 30, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What are the speakers wire colors on a pioneer car stereo?

fr left + white
fr left - white/black
fr right + grey
fr right - grey/black
rear left + green
rear left - green/black
rear right + purple
rear right - purple/black

hope this helps thumbs up pls

Aug 11, 2010 | Pioneer AVIC-D2 In-dash Car Audio Stereo...

1 Answer

Sunday morning my car got broken into in the church parking lot and the stereo stolen from it. Cheap stereo from Fry's. No damage to the car. Sunday evening a friend drops by a Metrik MDP-710 player still...

Hi, well any reliable Auto electrician should have no trouble in installing your unit. Really it is NOT a job, one should easily undertake, themselves, especially if retro-fitting a non-standard device into the car. Use the Yellow Pages, or the like, in your area and look for a reputable looking Auto Electrician, then contact them, or simply go there, and show them the unit and ask for a "Quote" for the install, possibly get a couple or even a few "Quotes" and choose the mid range one.. I think you will find this approach will get you the job done correctly at an affordable cost.

Jun 30, 2010 | Metrik DVD Players MDP-710 Car Video...

2 Answers

How do you turn off the touch tone feature on an avic d3 car stereo?

Go to the upper right navigation button, then under the navigation menu go to *SETTINGS, then *VOLUME, then *BEEP VOLUME. Push the minus (-) key until the annoying beep can no longer be heard.

Jun 11, 2010 | Pioneer AVIC-D3 Car DVD Player

5 Answers

Cdv 710 silver crest dvd is not working

Silvercrest has a policy about traffic security! they deliver car audio and dvd players with no possibility to watch video while driving !I went to a car audio specialist and they connected a brown cable which was the handbrake cable to the ground (a black cable and then the pro was solved!I didnt see the warning (enjoy music only while driving) i could watch dvd while driving and my pro was solved ..

Mar 25, 2009 | Car Audio & Video

2 Answers


You just need to connect the handbrake wire to handbrake. The handbrake connect to GND when it's engaged and the the radio will allow you to see the video. It's safety feature to not allow view videos while driving.

But where you bought this radio? I had one ago, but it was stolen together with car. Now I would like another again, I got mine from lidl.

Mar 25, 2009 | Car Audio & Video

1 Answer

Won't come out

1st you can try check position your dvd in your dashboard, if you did sure in good position and the body of dvd itsnot pressured by dashboard , check power connector , fuse of acc & bat+ beckup, make sure acc > 12v in stanby and work condition,bad conection power make voltage and ampere drop , so if dvd in heavy job acc drop from normal so make dvd mall fuction, other case if power normal that problem coused by broken mekanical of your display mekanic , Fix Ya

Sep 17, 2008 | Kenwood DNX7100 Car Video Player

1 Answer

Some buttons don't work

Pioneer AVIC-D1 Touch Screen Recalibration

If your pioneer AVIC car navigation unit does not register your touches or the wrong button is “pressed”, you need to re-calibrate your screen’s digitizer.

1-Hold the Eject button down until the face of the unit drops all the way
2-Using a pen hold down the reset button (just above the joystick) and the navigation disc eject simultaneously.
3-Release the reset button.
4-Release the dvd eject button next. The display will read “press reset”
5-Push the joystick up two times.
6-Push the joystick down twice.
7-Press the joystick in.
8-The service menu will appear after a short pause. You can navigate the service menu using the joystick.
9-Chose the first menu option and press in on the joystick.
10-Trace the screen with a stylus.
11-"P.ADJ" is the back button
12-Chose the second menu item in order to calibrate the touch screen. Use a stylus again and tap the "+" sign on the screen. (You may have to touch slightly off center if the digitizer is damaged. In which case things will still be off but it will be much better.)

Jul 27, 2008 | Pioneer AVIC-D2 In-dash Car Audio Stereo...

2 Answers

Memory Navi mode

Hi vsudude,
You have to go back to the menu and reset. Youcan take the help of owners mannual supllied along with the unit.


Jun 07, 2008 | Pioneer AVIC-N1 Car DVD Player

1 Answer

Touch screen not working

I'm sending my cdv-710 for repair, after 6 months of ownership.

Apr 12, 2008 | Car Audio & Video

5 Answers

Parking brake switch?

the best way to bypass is to connect your green handbrake cable to ur black power cable then it will work. it only needs power getting to it for it 2 sensor the handbrake is on.

Oct 22, 2007 | Jensen VM9510 Car DVD Player

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio & Video Experts

Michael Kovalik III
Michael Kovalik III

Level 2 Expert

117 Answers

The Knight
The Knight

Level 3 Expert

70983 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Pioneer Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides