Question about Air Conditioners

1 Answer

I have what i think is a 1988 seara 18hp rider mower and i wont to take the mower deck offf and put the 48" snowblower attachment on the front and i need the steps or a picture of how and what goes on first etc...

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 85 Answers

What the hek does your question have to do with air conditioning?

Posted on Dec 11, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Runs then kicks breaker offf

too many thing on the same circut, try unplugging some or use another outlet.

Nov 01, 2012 | Air Conditioners

1 Answer

How many tons is a 1988 RUUD model UGVB-07EA-ER sn VN5D104 F0488 1060?

From the numbers provided it looks like 4 tons of cooling. the number 48 in the serial means 48,000 btus which equals 4 tons. 4 tons of cooling means the home is around 2000 square feet. If this help please rate me and do a testimonial. Thanks

May 21, 2011 | Air Conditioners

1 Answer

How to on a blower in an split AC

Press on/offf in your remote. You keep any mode -blower will start first. But only dry and auto mode the fan speed will be low only. You can't change speeds

Jan 11, 2011 | LG LA185HV Split System Air Conditioner

1 Answer

I can't cancel the timer

Remove the plug offf , remove battery from the remote for some time. the timer must reset now.

Sep 27, 2010 | Carrier BCA101R Air Conditioner

1 Answer


It is ttime tto et your AC serviced.Remove the front filter after removing the front grille , then take the full ocver after removing the screws from within.
Now pull the whole set out and take it outside. Use a good watter jet to clean the dirt in the condenser coils , the fan and the inside.
Finally use a good air jet to clean up all the clogged fins.
Have the filters cleaned. now check by manual rotation of the fan if there is bearing noise. use some light oil to lubricate the ends so lessen the sound, plug it outside and test. if sound has redduced wsh offf with oil once again, if not the bush/bearing must be changed.
reset the whole unit back to test.

Sep 18, 2010 | LG LS-K1830CL Cool Mini Split Air...

1 Answer

Needs freeon fix self or take somewhere

Adding refrigerant is not a do it yourself job. Most likely, you just have a plugged air filter. Generally, you will find a washable nylon mess filter just behind the front grill.

Jul 09, 2010 | Goldstar KG6000R Window Air Conditioner

1 Answer

Compressor keeps kicking off. When it stays on the air is super cold but obviously once it kicks off i lose the cold air. I am pretty handy just don't know what I should be checking

Allot of times it is a simple fix. If you remove the front cover you should see the thermostat sensing probe attached to the front coil. This is supposed to sense the air intake air only. Sometimes for whatever reason some of the cold output air is directed across this your unit thinks it is colder in the room than it is. It looks like a copper wire attached to the front coil. Sometimes you can simply relocate this towards the bottom of the front coil and it will solve the problem. It should not actually be touching the coil fins but have holders that hold it away from the coil. I have actually just let the end of it stick out under the front cover a little so it will actually sense room air temperature and it has worked well. If you have anything blocking the cold air output like a curtain etc. It will cause your cold air to **** back into the unit and shut it off also.

Jun 30, 2010 | Frigidaire FAC126P1 wall/window Air...

1 Answer

I have a Trane Model # TWE048C140C0 Serial # 2261X5Y2V what is the ton rating for this A/C unit?

The tonnage of this unit is the 48 you find in the model. Each ton of cooling equals 12,000 B.T.U. So, 48 would be a 4- Ton Unit. 48 divided by 12 =4x12=48.

Feb 22, 2010 | Air Conditioners

1 Answer

It wont go into the heat side when i put thermostae to heat

If the fan comes on in Auto, thats a good thing, same if the cooling come on when put to cooling.

At the unit turn power off and remove and identify thermostat wires. Put a jumper wire between R an W or W1. Restore power, heat should come on.

If not,were there any wires attached to w or w1 before you started, if yes then you need to make sure the same wires and color are hooked up to same terminals at thermostat.

Jan 10, 2010 | American Standard WCZ036F Air Conditioner

1 Answer

Ducted aircon error code

1. check cirkit board.

Nov 30, 2007 | Air Conditioners

Not finding what you are looking for?
Air Conditioners Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Air Conditioners Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Bill Long

Level 3 Expert

577 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Are you an Air Conditioner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides