Question about Vizio P2 42 in. HD-Ready Plasma Television

3 Answers

VIZIO VW32L HDTV20A Cracked screen.

My VIZIO has a cracked screen. It was hit with a ladder. Can the screen be replaced? The parts number is 10223041022. Can I do this myself or will I need to have a professional do it? If so where? Who? I live in south west Missouri. vizio lcd 42 broken screen how much can cost to me replace it

Posted by on

  • Anonymous Dec 17, 2008

    my 42 in. vizio has a long vertical line at the far left corner

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Hey those screens are replace able and easy to do, you can do it yourself. I know shopjimmy has over 20,000 parts for vizio. If you get the panel number off the back of the screen itself they could look it up and see if they have a screen for you! the website is www.shopjimmy.com

Posted on May 07, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My wife was hooking up the cam recorder to or 50 inch vizio plasma hdtv and tried to plug the usb cable from cam recorder into the service one port in error. TV went off like the power button had been hit. Tv is dead now and will not come on. It has no power indicator light,nothing. Is there a fuse or something that could have blown?

Posted on Dec 29, 2008

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Contributor
  • 1,199 Answers

Unless you have experiance in ekectronics i would not attempt this fix myself! and with the parts and labor added up it very well be cheaper to replace it! hdts are at an all time low right now!

Posted on Dec 11, 2008

2 Suggested Answers

  • 7 Answers

SOURCE: VIZIO VW32L HDTV20A Cracked screen.

This can be replaced. You can do it yourself. Find the new screen, take the old unit apart and switch parts and remember the connections you undo to reconnect the new screen to the casing.

Posted on Jan 13, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Vizio model E320Vl TV. after working for about two hours it shuts off. You can unplug it and wait about 10 minutes and it turns back on but will shut off again after awhile.


Sounds like The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Jan 12, 2017 | Vizio Televison & Video

1 Answer

How can I fix my vizio tv, no LED backlighting. How likely is it that the problem is the power board and not the LED strips?


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Jan 12, 2017 | Vizio Televison & Video

1 Answer

I have a Vizio model E-470 - a 0 it has a grayish line across top and bottom of screen can still see TV fine accept looks like a filter grayish any ideas


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electro-medical.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Jan 11, 2017 | Vizio Televison & Video

2 Answers

Vizio tv 37" picture started to get darker


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Jan 11, 2017 | Vizio Televison & Video

1 Answer

Vizio model d65u-d2 NO POWER How to troubleshoot power on problems


If you wish to get some details; visit the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Jan 09, 2017 | Vizio Televison & Video

2 Answers

Where do I find the serial number on vizio tv model D48-d0


Below the model number on back of tv right rear corner

Jan 08, 2017 | Vizio Televison & Video

1 Answer

Have a dark band horizontally across vizio tv. Appears to be a backlight, but not sure how to fix


Could be a bad CCFL lamp, if the set usess CCFL back-light system. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Jan 08, 2017 | Vizio Televison & Video

Not finding what you are looking for?
Vizio P2 42 in. HD-Ready Plasma Television Logo

1,097 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vizio Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71635 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

CoppellTVRepair.com

Level 3 Expert

749 Answers

Are you a Vizio Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...