Question about Blaupunkt Tokyo RDM169

1 Answer

The display light suddenly went out. I can see the different fuctions like the time, station, and everything else still working when I shine a flashlight on it but it does not light up. Is there a light bulb in the front faceplate that can be replaced?

Posted by on

1 Answer

Re: The display light suddenly went out. I can see the...

Take your cd player to an electronic shop and ask for the thin film connection the screen with the main system, that should do it, you see after some time the film goes bad and eventually doen';t work

Posted on Jun 10, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

No Display Lighting

One thing you may have to take a look at is if your dash lights are all the way up. I know with my car, if i have my dash lights all the way down, everything looks like it is turned off but still works. This might also help with night driving and knowing what speed you are going. :)

Jul 04, 2009 | Dual XD6210 CD Player

2 Answers

My Dual XDM7510 display quit working and I can't find out what is wrong. Everything else on the XDM7510 works. Help me please. It was working when I went in the store came back out and no display.

try checking the illumination light on the back of the radio if that doesnt work then try looking at the red ignitionswitch wire and make sure it is connected to the 12vt constant (the yellow wire)

Mar 10, 2009 | Dual Car Audio Receivers

1 Answer

Setting the time

Setting Time
1 Press TITLE repeatedly until the time is displayed.
For details, see “Displaying the Text” (page 13)
2 Press and hold TITLE for at least 2 seconds while
the time is displayed.
The time indication will blink.
3 Turn the Rotary encoder to adjust the hours while
the time indication is blinking.
4 When the hour has been adjusted, press MODE.
5 Turn the Rotary encoder to adjust the minutes
while the time indication is blinking.
The time is automatically set 5 seconds after the minute
adjustment. The time can also be manually set by pressing TITLE.
• To synchronize the clock to another clock/watch or radio time
announcement, press and hold MODE for at least 2 seconds after
setting the “hour.” Minutes will reset to “00”. If the display shows
over “30” minutes when you do this, the time will advance one hour.
Listening to Radio
1 Press SOURCE/POWER until a radio frequency
appears on the display.
2 Press BAND repeatedly until the desired radio band
is displayed.
F1 (FM1) F2 (FM2) AM F1 (FM1)
3 Press TUNE to select the tuning mode.
DX SEEK (Distance mode) SEEK (Local mode)
OFF (Manual mode) DX SEEK
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4 Press or to tune in the desired station.
Holding down or will change the frequency
Manual Storing of Station Presets
1 Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2 Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) into which you wish
to store the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
•You will need to start from set up or you will not be able to set the mins

Dec 31, 2008 | Alpine CDE-9852 CD Player

1 Answer


It's a bit too late but now only I'm seeing this!

It's in blackout mode!
Press and hold the FUNC key for at least 2-3 secs to activate and deactivate!

BTW, do any of u have a broken unit or a DC/DC converter for this! The small box connected to the end of the green/blue cable.

Aug 23, 2008 | Alpine CD Player CDA-9855 LIMITED QUANTITY...

2 Answers

Kenwood excelon kdc-x815 display screen no power

recently bought a kenwood kdc-815 car radio from a swamp met. bought it with no security code need security code

Apr 08, 2008 | Kenwood KDC -X815

1 Answer

Volume, Display and FM stations missing?

This could be a bad ground on the radio, or you have serious circuit problems. if a fuse blew, the radio would not work at all. Check the installation first, replace the radio seconds. Good Luck

Jul 29, 2007 | Sony CDX-L420V CD Player

1 Answer

JVC KD -S680 needs help

all radios like your has two power inlets one is battery and the other is Acc or Ing. The battery line keeps power in the radio after you turn off your car both lines must work for the radio to turn on it sounds like a resister burn out thats why your face plate was warm.

Sep 25, 2006 | JVC KD-S680 CD Player

2 Answers

Won't reset/no input on bottom bar

Yes, the ribbon cable has gone bad on you. It's about 15$ itself and replacing it is easy.

Dec 18, 2005 | Aiwa CDC-MA01 CD Player

Not finding what you are looking for?
Blaupunkt Tokyo RDM169 Logo

Related Topics:

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Blaupunkt Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4679 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

56925 Answers

Are you a Blaupunkt Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides