Question about Bosch WFMC 3200 Front Load Washer

1 Answer

Bosch wfm3200 rubber gasket

I have a Bosch WFMC3200. I am having a problem with the rubber gasket and the spring that holds it in place. The spring popped off and now i cant figure out how to get it back into place

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Bosch Master
  • 3,463 Answers

You need to turn the seal back in on iteself at the front, then starting at the 12-o clock position, start feeding the spring round into the recess you will feel at the rear edge of the seal, it is a goove and that is where the spring fits.
As you progrees round with the spring you will find it harder and harder to get it to stay in the groove, this where you could do with some assistance.
You need to have some one hold the spring in place as you progreeively fit the spring.
You may find you will have to have more than attempt.
As a last resort, you can stretch the spring, which will make it easyier to fit., but do not stretch it too much, or it will not stay on.
Plz leave feed back for this solution.

Posted on Dec 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I remove door seal from wfmc3200uc/01


Bosch wfmc3200 uc/01 Front load washer how to change door seal.
This video will show you how to change a door seal on this Bosch front loader washing machine.
we have all bosch repairs in our channel.

Please remember to subscribe to our YouTube channel for all appliance tutorials

a 4 THUMBS rating is appreciated for answering your FREE question.

Oct 17, 2012 | Bosch Washing Machines

2 Answers

I need help replacing the front door gasket and seal


Bosch WFMC3200 Front Load Washer replacing the front door gasket and seal.
This video will show you how to change a door seal on this Bosch front loader washing machine .

we have all
bosch repairs in our channel


Please remember to subscribe to our YouTube channel for all appliance tutorials

a 4 THUMBS rating is appreciated for answering your FREE question.


Sep 12, 2010 | Bosch WFMC 3200 Front Load Washer

1 Answer

Wire that holds the rubber gasket came off


can usually take to people if you are not familiar.the spring does down towrds the bottom of the boot in the middle of the boot start with the ring at the top and go down both sides the have someone hold it in place about the 10 and 2 o clock positions while you use your hands or small screw driver and finish putting the ring in place

Jun 10, 2010 | Bosch Nexxt 500 WFMC3301 Front Load Washer

2 Answers

Wire ring that holds rubber seal on next 100 washer has come off


Bosch Nexxt 100 Series WFMC1001UC Front Load Washer how to put back on wire ring, with a spring for tension, that holds the inner rubber seal in place.
This video will show you how to change a door seal on this Bosch front loader washing machine and also how to get back on, the metal ring around the seal.
we have all bosch repairs in our channel.

Please remember to subscribe to our YouTube channel for all appliance tutorials

a 4 THUMBS rating is appreciated for answering your FREE question.

Jul 24, 2009 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

Gasget came off the washer and i can't get it back on


I have the perfect solution the placing of the Retaining Spring back on the Bosch Nexxt 500 Door Gasket. It only took me only 5 Minutes after fighting with it for hours and getting nowhere. What I did was purchase a set of 12 inch hemostats (long Clamping Pliers). The ends of the Hemostats I wrapped both of the jaws with Electrical tape to prevent the Spring on the retainer from sliding up the jaws of the hemostat. When the ends of the retainer are placed on the ends of the jaws and the hemostat opened the spring is stretched. I found that If you use your knee to hold the hemostat open while placing the retainer in the groove of the gasket you can slowly release the springs and set the retainer back into the gasket without the gasket pulling off the tabs.

Mar 01, 2009 | Bosch 3.81 cu ft WFMC530 1UC Nexxt 500...

1 Answer

Rubber gasket around opening


Iserial #15616047cc i want to know how to repair it my self
have a ANANA washer machine model alw 480daw

Jan 27, 2008 | Bosch WFMC 3200 Front Load Washer

1 Answer

Door trouble


The door helps the the interlock to open as the door latch as it helps the latch spring back....

All you need to do is use a screw drive to pull the doorinterlock back into place...

with the machine off of course.. just gentley play with it and it will open....

any questions dont hesitate to ask

Jan 18, 2008 | Bosch WFMC 3200 Front Load Washer

1 Answer

Front Door gasket and ring


no trick or technique - just a pain to do. don't be afraid to stretch it and if done as a two man job its far easier. one way i thought of was to make a former of approx the right diameter and slip the ring from the former on to the door boot

May 14, 2007 | Bosch WFMC 3200 Front Load Washer

Not finding what you are looking for?
Bosch WFMC 3200 Front Load Washer Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...