Question about Canon PowerShot S410 / IXUS 430 Digital Camera

4 Answers

Lcd is blery

When i tern on the camera the lcd start two lose her colors until it stay blurred and the button don't work.

Posted by on

  • Anonymous Jan 09, 2008

    I seem to have the same problem My ixus lcd loses clolors, image is blurred and if i shoot a picture I get what I see in the lcd. Any solution?

×

Ad

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Canon Master
  • 4,738 Answers

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:
http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html
http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819
Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110

Posted on Nov 16, 2007

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi "advance", I am also facing the same issue.. When I switch on the camera it shows a "blurry" screen ( some different colors), all the new photos I take with this screen appears the same blurry, how ever my previous photos in the past, I could able to view properly.. Any thoughts?

Posted on Sep 18, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi can u send me the resolution for this. even my s410 shows the same lose colors ... waterly like ... and even the photoes come that way.

Posted on Sep 18, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 107 Answers

What you describe may be caused by several different faults. Do the pictures from the camera show the same blurry washed out look? It may be either the aperture is stuck wide open, or the shutter may be similarly stuck open. Can you describe the symptoms further?

Posted on Mar 06, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I snap it having lines and blur


Buy new camera and use it often. You don't use it you lose it.Oxidation on circuit connector, contact resistance became too high.

Jul 15, 2012 | Samsung Digimax S600 Digital Camera

1 Answer

Every picture i take of still objects turn out really blurred


How do you hold your camera? Holding it at arms length and viewing the subject through the screen will practically guarantee a blurred image with most cameras. You might get away with it with cameras equipped with Image Stabilization but not compact digitals.
Use the view finder and hold camera firmly against your face. Frame your subject, take a breath in then exhale, stop breathing momentarily and squeeze the button. (Don't forget to start breathing again!) If possible rest your camera on or against a solid object while shooting.

May 18, 2011 | Cameras

1 Answer

Fe 230 focus problem


the LCD may not light at the first due to low batteries too... but i feel there are some more problem... as the shot is also blur you can try cleaning your lens... the autofocus may not work due to dust also... try cleaning the lens of your camera

Oct 23, 2008 | Olympus FE-230 Digital Camera

2 Answers

Photo's blur alot


Blurness doesn't happens because of the number of the pixels in the cameras.
Is the picture on the computer screen blur/the cameras screen or the lens hole?

I suggest you to set the camera on Automatic station (red camera on the wheel) in day light,try to stay still see how blur the photos are when you are not playing with the parameters. it it's still blurry it could be the pulley block next to the -eyepiece. roll it until it's not blur.

goodluck

Jun 26, 2008 | Panasonic Lumix DMC-FZ5 Digital Camera

1 Answer

Blurred Video


go to the qualified service center for replacing the ccd image sensor....cause it is already damage

Aug 06, 2007 | Sony Handycam DCR-TRV8 Mini DV Digital...

1 Answer

Sony Handycam DCR-TRV460E Digital-8 Digital - Blurred LCD & View-Finder Images


Hello, you should contact Sony Service again. There is a chance that this camera is under so called Sony recall. If you need more info please advice.

Mar 09, 2007 | Sony Handycam DCR-TRV460E Digital...

1 Answer

DCR-TRV460E Digital 8 Blurred LCD & Viewer in Recorder Mode


Dear sir, If u seeing image properly ( Blur image ). In main board or sub board some components will be leakage. This leakage will form, if the camera not use for a long time. If the image is not clear then the CCD may be defective. For CCD failure SONY company will give u free service & spares for this camera model. (only for CCD failure) Best of luck udupi M/s.Prathiksha Electronics Bangalore

Mar 09, 2007 | Sony Handycam DCR-TRV460E Digital...

1 Answer

Canon Powershot A75 blurred LCD display


It sounds like the focus element in your lens is not functioning properly. Does the lens retract completely when you turn off the camera? When you push the button does the camera attempt to focus the image? If you do not see any change in the image when you push the button, and do not hear any sound - then your focus motor is either jammed or malfunctioning. David Millier Advance Camera Repair

Feb 13, 2007 | Canon PowerShot A75 Digital Camera

1 Answer

Blurness of the LCD of my Canon A80 Camera


This is a defective CCD known to Canon. They will repair it FREE of charge. Go here for more detail: http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=223&modelid=8044&keycode=2112&id=29819

Dec 04, 2006 | Canon PowerShot A80 Digital Camera

1 Answer

Picture still blurred on record mode


Your problem sounds like a focus problem. Could be that it's on manual focus and you're hitting the sweet spot only in full zoom? From the manual: 1. Set the power switch to CAMERA mode. 2. Turn the MENU DIAL up or down until the FOCUS is highlighted and then press the ENTER button.  M. FOCUS(MF) will display. 3. Turn the MENU DIAL up or down until the object is in focus.  Zoom out a little if focusing is difficult. 4. To return to AF (Auto Focus: ), press the ENTER button again. Hope it works out, let us know!

Jun 03, 2006 | Samsung SC-D103 Mini DV Digital Camcorder

Not finding what you are looking for?
Canon PowerShot S410 / IXUS 430 Digital Camera Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

TC CAMERA REPAIR.Com...

Level 2 Expert

176 Answers

old marine
old marine

Level 3 Expert

2188 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...